Flaming River steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jay-dawg · 07-28-2003, 05:03 AM

Hi guys,
Just wanted to know who has installed a Flaming River column. I'm looking to get a tilt/auto column shift one. Anyone got the dimensions or have the part number that they used?

Thanks in advance.
Jay

Wootdog · 07-28-2003, 08:06 AM

Does this column you're talking about have the key on the colummn? IF so I would be interested in finding out also. Wootdog

Wootdog · 07-28-2003, 08:07 AM

I would be looking at without AT on the column. I will be using a floor shift. Wootdog

lux hauler · 07-28-2003, 09:14 AM

http://www.flaming-river.com/truck-col.htm

MOTHERTRUCKERS · 07-28-2003, 09:30 AM

FR20003 steel tilt floor shift column 35". We sell them for 309.00. Easy install with 2 Borgansen joints and 2 foot of DD shaft. A borgansen joint is needed to attach the column to a length of DD shaft ( looks like the intermediate shaft in our trucks) then another borgansen joint attaches to the steering box.

jay-dawg · 08-01-2003, 01:26 PM

thanks guys.

jay

Brewski* · 08-01-2003, 03:09 PM

Frank Ham has installed them his handle is PICKMUP. He sells them also. I am going with if they ever make them for floor shift.

Wootdog · 08-01-2003, 04:43 PM

you can get one with the ignition on the column also. I need to know the total cost for all and how hard it is to put in. IE I don't know what this shaft stuff Mother truckers is talking about. And how is this stuff connected with these joints? Thanks in advance Wootdog

MOTHERTRUCKERS · 08-01-2003, 06:58 PM

see above.

Wootdog · 08-01-2003, 07:21 PM

Ed I sent you an email. Wootdog

jay-dawg · 08-02-2003, 05:13 AM

thanks guys,
I checked the flaming river site and it doesn't mention ignition on the column. I'll probably put a push button start and hide it somewhere. another cool anti theft deterrent.

jay

07-28-2003, 05:03 AM	#1
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Flaming River steering column Hi guys, Just wanted to know who has installed a Flaming River column. I'm looking to get a tilt/auto column shift one. Anyone got the dimensions or have the part number that they used? Thanks in advance. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

07-28-2003, 08:06 AM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	re steering column Does this column you're talking about have the key on the colummn? IF so I would be interested in finding out also. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

07-28-2003, 08:07 AM	#3
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	re re I would be looking at without AT on the column. I will be using a floor shift. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

07-28-2003, 09:14 AM	#4
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	http://www.flaming-river.com/truck-col.htm __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

07-28-2003, 09:30 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	FR20003 steel tilt floor shift column 35". We sell them for 309.00. Easy install with 2 Borgansen joints and 2 foot of DD shaft. A borgansen joint is needed to attach the column to a length of DD shaft ( looks like the intermediate shaft in our trucks) then another borgansen joint attaches to the steering box. __________________ Rest in Peace Ed. Thanks for all the good times. Last edited by MOTHERTRUCKERS; 08-01-2003 at 06:57 PM.

08-01-2003, 01:26 PM	#6
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks guys. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

08-01-2003, 03:09 PM	#7
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Frank Ham has installed them his handle is PICKMUP. He sells them also. I am going with if they ever make them for floor shift.

08-01-2003, 04:43 PM	#8
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Find out if you can get one with the ignition on the column also. I need to know the total cost for all and how hard it is to put in. IE I don't know what this shaft stuff Mother truckers is talking about. And how is this stuff connected with these joints? Thanks in advance Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

08-01-2003, 06:58 PM	#9
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	see above. __________________ Rest in Peace Ed. Thanks for all the good times.

08-01-2003, 07:21 PM	#10
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,680	Mother truckers Ed I sent you an email. Wootdog __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

08-02-2003, 05:13 AM	#11
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks guys, I checked the flaming river site and it doesn't mention ignition on the column. I'll probably put a push button start and hide it somewhere. another cool anti theft deterrent. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.