?????????? About 67/68 trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71HUGGER396 · 07-11-2011, 05:51 AM

HI GUYS, I PLAN ON USING THE 68 FRONT CLIP ON MY 70 BLAZER. I WANT TO USE THE 68 TRIM ALSO, I KNOW THAY IT WILL HAVE TO BE SHORTENED TO WORK ON THE QUARTER PANEL. I REALLY HAVE NEVER REALLY SAW 68 TRIM UP CLOSE AND DO NOT WANT TO BUY IT IF IT WILL NOT WORK. MY BIGGEST WORRY IS HOW WIDE IS IT FROM TOP TO BOTTOM, ON THE BEDSIDE PIECE IN THE FRONT OF THE BED? IS IT ONE WIDTH OR DOES IT NARROWER OR WIDEN OUT????? C

OULD SOME ONE MEASURE THEIR TRIM?? THANKS IN ADVANCE!!!!!!

Sorry, I posted in the wrong section.

msgross · 07-11-2011, 07:04 AM

moved, please avoid using all CAPS as well... it's considered yelling and difficult to read...

as far as your trim question goes, it's all the same width 2 3/8" and 1 3/4 over the wheels.

jaros44sr is doing the same thing with his blazer so i'd talk to him...

http://67-72chevytrucks.com/vboard/s...210641&page=82

jayman68 · 07-11-2011, 12:09 PM

I have some of the trim pieces for sale. Let me know if you have any more questions.
http://67-72chevytrucks.com/vboard/s...d.php?t=473992

Edit: The link is to my ad in the classified section. Hope it was not impropper to post it here.

tubbedII · 07-11-2011, 01:02 PM

I considered doing the same to mine, but the price of the trim has halted my plans of it...

I have never seen a blazer with it, but a couple photoshops have been done and it looks good. From past threads, you'd need to cut down the bed piece and then roll it over and finish it off for a "perfect" match.

I thought too I read somewere about the rear fender line not being right over the wheel well, but I couldn't find that thread again later, so I might have imagined it.

msgross · 07-11-2011, 05:40 PM

Quote:

Originally Posted by jayman68

I have some of the trim pieces for sale. Let me know if you have any more ???.
http://67-72chevytrucks.com/vboard/s...d.php?t=473992

Please post an ad in the parts section if you wish to sell something... Thanks..

71HUGGER396 · 07-11-2011, 07:06 PM

Thanks for the info guys.

67chevy1series · 07-11-2011, 07:12 PM

this trim is very easy to shorten. here is what you need

an this,

and just grind the trim down its best to cut it close to the size you need then grind it down to the area you need

07-11-2011, 05:51 AM	#1
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	?????????? About 67/68 trim HI GUYS, I PLAN ON USING THE 68 FRONT CLIP ON MY 70 BLAZER. I WANT TO USE THE 68 TRIM ALSO, I KNOW THAY IT WILL HAVE TO BE SHORTENED TO WORK ON THE QUARTER PANEL. I REALLY HAVE NEVER REALLY SAW 68 TRIM UP CLOSE AND DO NOT WANT TO BUY IT IF IT WILL NOT WORK. MY BIGGEST WORRY IS HOW WIDE IS IT FROM TOP TO BOTTOM, ON THE BEDSIDE PIECE IN THE FRONT OF THE BED? IS IT ONE WIDTH OR DOES IT NARROWER OR WIDEN OUT????? COULD SOME ONE MEASURE THEIR TRIM?? THANKS IN ADVANCE!!!!!! Sorry, I posted in the wrong section. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin" Last edited by 71HUGGER396; 07-11-2011 at 05:53 AM. Reason: needs moved

07-11-2011, 07:04 AM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: ?????????? About 67/68 trim moved, please avoid using all CAPS as well... it's considered yelling and difficult to read... as far as your trim question goes, it's all the same width 2 3/8" and 1 3/4 over the wheels. jaros44sr is doing the same thing with his blazer so i'd talk to him... http://67-72chevytrucks.com/vboard/s...210641&page=82 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-11-2011, 12:09 PM	#3
jayman68 Fun Stuff Join Date: Jan 2010 Location: Sedro Woolley, WA Posts: 400	Re: ?????????? About 67/68 trim I have some of the trim pieces for sale. Let me know if you have any more questions. http://67-72chevytrucks.com/vboard/s...d.php?t=473992 Edit: The link is to my ad in the classified section. Hope it was not impropper to post it here. __________________ Jay 68 C10(project) 88 Honda Accord(DD) 93 Chevy Astro EXT 2wd Last edited by jayman68; 07-11-2011 at 11:03 PM.

07-11-2011, 01:02 PM	#4
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: ?????????? About 67/68 trim I considered doing the same to mine, but the price of the trim has halted my plans of it... I have never seen a blazer with it, but a couple photoshops have been done and it looks good. From past threads, you'd need to cut down the bed piece and then roll it over and finish it off for a "perfect" match. I thought too I read somewere about the rear fender line not being right over the wheel well, but I couldn't find that thread again later, so I might have imagined it. __________________ 1970 2wd Blazer

07-11-2011, 07:06 PM	#6
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: ?????????? About 67/68 trim Thanks for the info guys. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

07-11-2011, 07:12 PM	#7
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: ?????????? About 67/68 trim this trim is very easy to shorten. here is what you need an this, and just grind the trim down its best to cut it close to the size you need then grind it down to the area you need

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.