![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jun 2002
Location: Tucson AZ by way of WI & CA
Posts: 509
|
Temperature Guage Issues
After installing the motor and using the original wiring harness i kept the temp sending unit in the drivers side head, not wanting to fully trust that i also installed a temp guage in the passenger head. While running the factory guage reads hot and the temp guage reads about 180. My questions is does the factory guage have issues? Is there an issue reading the temp from the passenger head since these heads are interchangeable? This is a new sending unit. I do have a shroud that is about 75% coverage, the bottom section is missing. This appears sitting and driving. My coolant overflow tank is empty and my coolant level never changes. I have no apparent overheating issues. This is a 383 with a manual trans. Any thought appreciated. Thanks
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Temperature Guage Issues
i always take the temp of the coolant with a known good thermometer to see if a gauge is accurate
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2011
Location: OLIVEHURST CA
Posts: 570
|
Re: Temperature Guage Issues
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|