WTB: Suburban Barn Door Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

k5kev · 08-13-2008, 03:56 PM

I need a few parts to finish off my conversion from hatch & tailgate to barn doors. I need all the door strikes that bolt to the body as well as a pair of sliders (or whatever they're called) that limit the door from opening too far.

Any help out there? Thanks.

**Hart_Rod** · 08-13-2008, 05:00 PM

Quote:

Originally Posted by k5kev

I need a few parts to finish off my conversion from hatch & tailgate to barn doors. I need all the door strikes that bolt to the body as well as a pair of sliders (or whatever they're called) that limit the door from opening too far.

Any help out there? Thanks.

Can't you use the ones from the liftgate? I thought they were the same (slides and strikers).

mahanian · 08-13-2008, 09:49 PM

saw this on craigslist in AZ, might be worth checking in to...

http://phoenix.craigslist.org/cph/pts/790839130.html

olblue60@aol.com · 08-13-2008, 09:53 PM

I think the sliders are different on the door end. It has an angle shaped bracket. ??

**Classic Bowties** · 08-13-2008, 10:06 PM

Quote:

Originally Posted by Hart_Rod

Can't you use the ones from the liftgate? I thought they were the same (slides and strikers).

The door/hatch checks are different from one another and not interchangable, see below.

**Classic Bowties** · 08-14-2008, 10:57 PM

Quote:

Originally Posted by k5kev

I need a few parts to finish off my conversion from hatch & tailgate to barn doors. I need all the door strikes that bolt to the body as well as a pair of sliders (or whatever they're called) that limit the door from opening too far.

Any help out there? Thanks.

I would let the two above pictured barn door checks go for $25. per side, if interested drop me a pm.

k5kev · 08-15-2008, 12:30 PM

Quote:

Originally Posted by Classic Bowties

I would let the two above pictured barn door checks go for $25. per side, if interested drop me a pm.

PM'd ya Classic.

olblue60@aol.com · 08-15-2008, 10:34 PM

One of my suburbans have this modification. I found that the location that the arm is located at the top of the opening is pretty critical or it wont activate the gizmo plate inside the arm, and then it wont operate properly. I can help you out with those measurements, but I wont be home untill after the weekend. Sorry, I dont have any extra catches.

John

k5kev · 08-24-2008, 02:19 PM

Still looking for barn door strikes (catches).

bondo510 · 07-21-2011, 06:12 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

08-13-2008, 03:56 PM	#1
k5kev New Member Join Date: Apr 2006 Location: Anaheim, CA Posts: 304	WTB: Suburban Barn Door Parts I need a few parts to finish off my conversion from hatch & tailgate to barn doors. I need all the door strikes that bolt to the body as well as a pair of sliders (or whatever they're called) that limit the door from opening too far. Any help out there? Thanks.

08-13-2008, 09:49 PM	#3
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: WTB: Suburban Barn Door Parts saw this on craigslist in AZ, might be worth checking in to... http://phoenix.craigslist.org/cph/pts/790839130.html Last edited by mahanian; 08-13-2008 at 09:49 PM. Reason: forgot the link

08-13-2008, 09:53 PM	#4
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: WTB: Suburban Barn Door Parts I think the sliders are different on the door end. It has an angle shaped bracket. ?? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-15-2008, 10:34 PM	#8
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: WTB: Suburban Barn Door Parts One of my suburbans have this modification. I found that the location that the arm is located at the top of the opening is pretty critical or it wont activate the gizmo plate inside the arm, and then it wont operate properly. I can help you out with those measurements, but I wont be home untill after the weekend. Sorry, I dont have any extra catches. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-24-2008, 02:19 PM	#9
k5kev New Member Join Date: Apr 2006 Location: Anaheim, CA Posts: 304	Re: WTB: Suburban Barn Door Parts Still looking for barn door strikes (catches).

07-21-2011, 06:12 AM	#10
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: WTB: Suburban Barn Door Parts Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by gcburdic; 07-21-2011 at 09:12 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.