post your 67-72 4x4

[68 TT]

Originally Posted by 67chev_4x4

new here also just wanted to show a start of my long project. 67 c10 body on a 70s frame 5 speed with a 87 350

What did you do to the frame to make the cab fit with the bed mounted on the rails?

[67chev_4x4]

Originally Posted by 68 TT

What did you do to the frame to make the cab fit with the bed mounted on the rails?

put some lift bocks on so everything would sit rails right. if you look at the wheel wells you can see the gap it suxs but im trying to find a way to close it up but make it look right

[68 TT]

Originally Posted by 67chev_4x4

put some lift bocks on so everything would sit rails right. if you look at the wheel wells you can see the gap it suxs but im trying to find a way to close it up but make it look right

I'm working on the same problem. I will let you know what I come up with when I get back to that project.

Rebuilding the new axle assemblies for my 78 K20 right now so the 5.13 geared ones can go to their new owner. Once that is done I will be back on the 67/69 4x4 conversion project.

[plummen]

ive got a roll off that black plastic skirting stuff that goes in between the body/frame for a 2" body lift kit to hide the gap.
free to good home if somebody can use it,new still in box

[Jackedup67]

I Dig the hell outta that truck jerad121. Heres Mine

[67chev_4x4]

Originally Posted by 68 TT

I'm working on the same problem. I will let you know what I come up with when I get back to that project.

Rebuilding the new axle assemblies for my 78 K20 right now so the 5.13 geared ones can go to their new owner. Once that is done I will be back on the 67/69 4x4 conversion project.

im going to try this kit out that im getting off a guy and i will let you know how it works