ND Parting 72 BB 2wd Pickup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robbieg454 · 07-26-2011, 08:47 PM

Parting a 2wd 72 402 auto pick up.
72 BB motor mounts 150. clam shells included . Shipped
High hump 140 shipped I have the original bolts
72 door panels 30ea plus shipping, green no cracks just ugly
400 auto kick down I have the switch bracket and wiring 50 shipped
I also have the original 402 bare block 100.00 plus shipping.
I also have the truck cab is shot no gauges Box sides are good no tail gate, It also has 8 lug disc in front. I will sell parts off the truck before it is crushed.
More picture later.
I take pay pal or old fasion money order...

robbieg454 · 07-26-2011, 08:57 PM

here are more
Any questions just ask I will do my best to answer...

**Classic Bowties** · 07-26-2011, 09:07 PM

Dana 60 coil rear here guys & most likely in a freeway friendly 3.54 ratio. Mel

BB72CHEVKT · 07-26-2011, 09:30 PM

got any pics of the door panels?

**Daddy Brim** · 07-26-2011, 09:35 PM

I interested in that 400 auto kick down. I have a 67 with a 400 auto was wanting to convert it to a throttle cable. Was wondering how hard it would be to put that in my 67? Can you post some pics of how it mounted in your truck and the bracket the kick down is on . Thanks

robbieg454 · 07-26-2011, 10:01 PM

Will include the factory cable with the kick down. here are teh picks of the panels.

**too much stuff** · 07-26-2011, 10:11 PM

You say the cab is no good? When this was recently listed, the owner thought it was pretty good. Let me know, i am looking for a good cab like this. Is the glovebox door any good?
Eric

Vintage Windmills · 07-26-2011, 10:19 PM

How much for the back half to make a trailer out of? Where in ND are you?

robbieg454 · 07-27-2011, 07:15 AM

Quote:

You say the cab is no good? When this was recently listed, the owner thought it was pretty good. Let me know, i am looking for a good cab like this. Is the glovebox door any good?

Floors and rockers are shot cab corners are shot, This is the first time I listed it, You can come look at the cab if you want but you will be wasting your time. The glove box door is good I will post a pic tonight.

I am 40mile west of GrandForks, PM me your number on the rear half if you are interested.

**screaminchevypickup** · 07-27-2011, 07:42 AM

I would be interested in just the stainless and woodgrain pcs off the door panels if you decide to split them up thanks Kyle
Posted via Mobile Device

redmonster · 07-27-2011, 11:34 AM

how much for the upper trim molding, i need the lil pieces just behind the doors bout 4 inches long, both sides.

pics please

robbieg454 · 07-27-2011, 10:44 PM

Quote:

interested in that 400 auto kick down. I have a 67 with a 400 auto was wanting to convert it to a throttle cable. Was wondering how hard it would be to put that in my 67? Can you post some pics of how it mounted in your truck and the bracket the kick down is on . Thanks

Should bolt up in place of your original pedal. I will also include the cable from the pedal to the carb...

Quote:

I would be interested in just the stainless and woodgrain pcs off the door panels if you decide to split them up thanks Kyle

I would split them up I would take 40 for both pieces shipped to you, the wood grain and stainless.

Quote:

How much for the back half to make a trailer out of

I would have to get 200.

Vintage Windmills · 07-27-2011, 10:53 PM

Your price of 200 is fair on the back half assuming that includes box, frame (cut right where it starts to curve up), rear axle with suspension, and all lights still on it. Does it include the wheels? Not a big deal if it doesn;t, i just need to plan. Can you shoot a pic of the floor before I commit to it? My brother is in Emerado so I'm sure we can work something out for getting it easily.

robbieg454 · 07-28-2011, 07:17 AM

Yep, includes all that and yes the tires and wheels also. Bed is wood and needs replaced but the seperation strips are there.

**Daddy Brim** · 07-28-2011, 09:43 AM

Yes I will take the 400 auto kick down and I can use the cable with it let know how to pay you.

robbieg454 · 07-28-2011, 09:50 AM

Quote:

Originally Posted by Daddy Brim

Yes I will take the 400 auto kick down and I can use the cable with it let know how to pay you.

PM me your pay pal info and I will get it out to you

robbieg454 · 07-28-2011, 08:17 PM

Quote:

Originally Posted by redmonster

how much for the upper trim molding, i need the lil pieces just behind the doors bout 4 inches long, both sides.

pics please

I only have the passanger side. 10 Shipped to you,

robbieg454 · 07-28-2011, 08:21 PM

Quote:

Originally Posted by Vintage Windmills

Your price of 200 is fair on the back half assuming that includes box, frame (cut right where it starts to curve up), rear axle with suspension, and all lights still on it. Does it include the wheels? Not a big deal if it doesn;t, i just need to plan. Can you shoot a pic of the floor before I commit to it? My brother is in Emerado so I'm sure we can work something out for getting it easily.

Here are the pictures. Like I said the wood is pretty much gone but the metal strips are in good shape.

Vintage Windmills · 07-28-2011, 11:58 PM

Ok, I'll take the rear half. Like to check out the cab when I pick it up. PM me about arrangements!

robbieg454 · 07-29-2011, 11:20 AM

PM Sent

Vintage Windmills · 08-02-2011, 08:08 PM

Paypal sent the other day for back half, I assume you got it? Thanks,

Jud

07-26-2011, 08:47 PM	#1
robbieg454 Registered User Join Date: Jul 2011 Location: North Dakota Posts: 107	Parting 72 BB 2wd Pickup Parting a 2wd 72 402 auto pick up. 72 BB motor mounts 150. clam shells included . Shipped High hump 140 shipped I have the original bolts 72 door panels 30ea plus shipping, green no cracks just ugly 400 auto kick down I have the switch bracket and wiring 50 shipped I also have the original 402 bare block 100.00 plus shipping. I also have the truck cab is shot no gauges Box sides are good no tail gate, It also has 8 lug disc in front. I will sell parts off the truck before it is crushed. More picture later. I take pay pal or old fasion money order... Attached Images

07-26-2011, 08:57 PM	#2
robbieg454 Registered User Join Date: Jul 2011 Location: North Dakota Posts: 107	Re: Parting 72 BB 2wd Pickup here are more Any questions just ask I will do my best to answer... Attached Images

07-26-2011, 09:07 PM	#3
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,601	Re: Parting 72 BB 2wd Pickup Dana 60 coil rear here guys & most likely in a freeway friendly 3.54 ratio. Mel

07-26-2011, 09:30 PM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Parting 72 BB 2wd Pickup got any pics of the door panels? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

07-26-2011, 09:35 PM	#5
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: Parting 72 BB 2wd Pickup I interested in that 400 auto kick down. I have a 67 with a 400 auto was wanting to convert it to a throttle cable. Was wondering how hard it would be to put that in my 67? Can you post some pics of how it mounted in your truck and the bracket the kick down is on . Thanks __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2. Last edited by Daddy Brim; 07-26-2011 at 09:55 PM.

07-26-2011, 10:01 PM	#6
robbieg454 Registered User Join Date: Jul 2011 Location: North Dakota Posts: 107	Re: Parting 72 BB 2wd Pickup Will include the factory cable with the kick down. here are teh picks of the panels. Attached Images

07-26-2011, 10:11 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: Parting 72 BB 2wd Pickup You say the cab is no good? When this was recently listed, the owner thought it was pretty good. Let me know, i am looking for a good cab like this. Is the glovebox door any good? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-26-2011, 10:19 PM	#8
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 72 BB 2wd Pickup How much for the back half to make a trailer out of? Where in ND are you? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-27-2011, 07:42 AM	#10
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Parting 72 BB 2wd Pickup I would be interested in just the stainless and woodgrain pcs off the door panels if you decide to split them up thanks Kyle Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

07-27-2011, 11:34 AM	#11
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: Parting 72 BB 2wd Pickup how much for the upper trim molding, i need the lil pieces just behind the doors bout 4 inches long, both sides. pics please __________________ WITNESS Dont be like me be better than me Last edited by redmonster; 07-27-2011 at 11:34 AM. Reason: ....

07-27-2011, 10:53 PM	#13
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 72 BB 2wd Pickup Your price of 200 is fair on the back half assuming that includes box, frame (cut right where it starts to curve up), rear axle with suspension, and all lights still on it. Does it include the wheels? Not a big deal if it doesn;t, i just need to plan. Can you shoot a pic of the floor before I commit to it? My brother is in Emerado so I'm sure we can work something out for getting it easily. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-28-2011, 07:17 AM	#14
robbieg454 Registered User Join Date: Jul 2011 Location: North Dakota Posts: 107	Re: Parting 72 BB 2wd Pickup Yep, includes all that and yes the tires and wheels also. Bed is wood and needs replaced but the seperation strips are there.

07-28-2011, 09:43 AM	#15
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: Parting 72 BB 2wd Pickup Yes I will take the 400 auto kick down and I can use the cable with it let know how to pay you. __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2.

07-28-2011, 11:58 PM	#19
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 72 BB 2wd Pickup Ok, I'll take the rear half. Like to check out the cab when I pick it up. PM me about arrangements! __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-29-2011, 11:20 AM	#20
robbieg454 Registered User Join Date: Jul 2011 Location: North Dakota Posts: 107	Re: Parting 72 BB 2wd Pickup PM Sent



Register or Log In To remove these advertisements.

08-02-2011, 08:08 PM	#21
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 72 BB 2wd Pickup Paypal sent the other day for back half, I assume you got it? Thanks, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.