Cab Mounts...Part Deux - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Canadian694x4** · 08-06-2003, 11:52 PM

Does anyone have pics of there cab mounts and/or the bracket that is on the frame? I fanyone could post sum pics it would help me out.

Thanks

Brian

Nelson · 08-07-2003, 12:10 AM

I seen a picture of the bracket alone on Ebay once. It had a picture.

68 Suburban · 08-07-2003, 12:33 AM

Is this what you want to see? This is what they look like in Arizona. I don't know what they look like after 30 years of winters in Canada.

**Canadian694x4** · 08-07-2003, 01:09 AM

Well I can say My Mounting Brackets look Cleaner then yours but My Rubber Mounts look craptacular (Cracked, etc.).

Does anyone have a pic of a mount from the top? I.E. some of you frame off guys? Plus are the mounts Riveted or bolted to the frame originally on our trucks?

BUXMAN66 · 08-07-2003, 02:13 AM

the forward mounting bolt (under your foot on d/s) is the one that is tack welded to the cab floor.....actually the washer is and the bolt goes down through the floor. the rear cab mount is put in from the bottom and up to the floor into a threaded nut tack welded to the floor.rear is pretty easy,... the front can be kind of a %itch! double check this info though cause this is on a 2wd. might vary on a 4x4. goot luck!

68 Suburban · 08-07-2003, 04:44 AM

Quote:

Originally posted by Canadian694x4
Well I can say My Mounting Brackets look Cleaner then yours but My Rubber Mounts look craptacular (Cracked, etc.).

Does anyone have a pic of a mount from the top? I.E. some of you frame off guys? Plus are the mounts Riveted or bolted to the frame originally on our trucks?

Oh that is not my mount. It is a picture from one of the trucks I am selling. You can eat off the bottom of my burb

Class of 69 · 08-07-2003, 09:45 PM

Mounts are riveted. It's getting too dark for a pic tonight, but if you still need one tomorrow, I can get one of a 2x4 frame.

**Canadian694x4** · 08-07-2003, 10:29 PM

Pics are welcome...I think I've had a mount bracket replaced in the lifetime of this truck cause some mounts are riveted and bolted?!

08-06-2003, 11:52 PM	#1
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Cab Mounts...Part Deux Does anyone have pics of there cab mounts and/or the bracket that is on the frame? I fanyone could post sum pics it would help me out. Thanks Brian __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

08-07-2003, 12:10 AM	#2
Nelson Registered User Join Date: Jun 2001 Location: cambridge,ont,canada Posts: 128	I seen a picture of the bracket alone on Ebay once. It had a picture. __________________ Nelson 1970 C10 350 Auto. A/C not Working

08-07-2003, 12:33 AM	#3
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Is this what you want to see? This is what they look like in Arizona. I don't know what they look like after 30 years of winters in Canada. __________________ Just sitting here contemplating contemplation.

08-07-2003, 01:09 AM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Well I can say My Mounting Brackets look Cleaner then yours but My Rubber Mounts look craptacular (Cracked, etc.). Does anyone have a pic of a mount from the top? I.E. some of you frame off guys? Plus are the mounts Riveted or bolted to the frame originally on our trucks? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

08-07-2003, 02:13 AM	#5
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	the forward mounting bolt (under your foot on d/s) is the one that is tack welded to the cab floor.....actually the washer is and the bolt goes down through the floor. the rear cab mount is put in from the bottom and up to the floor into a threaded nut tack welded to the floor.rear is pretty easy,... the front can be kind of a %itch! double check this info though cause this is on a 2wd. might vary on a 4x4. goot luck! __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

08-07-2003, 09:45 PM	#7
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	Mounts are riveted. It's getting too dark for a pic tonight, but if you still need one tomorrow, I can get one of a 2x4 frame. __________________ 69 GMC K10 ..some restoration required....still..

08-07-2003, 10:29 PM	#8
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Pics are welcome...I think I've had a mount bracket replaced in the lifetime of this truck cause some mounts are riveted and bolted?! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.