Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-15-2011, 02:13 PM | #1 |
Registered User
Join Date: Feb 2008
Location: Surprise, Ariz.
Posts: 186
|
water outlet goose neck 73gmc
Hi all, need some advice on rethreading holes on the intake. One of the holes was stripped. Have rented a thread restorer from AZone. The previous hole was 3/8, the next size is 7/16. My problem is getting started on the holes. I drilled the holes in the gooseneck to 7/16, for the new bolt. That's where i am now. Any help would be appreciative. Thanks Frankyjoe
|
08-15-2011, 03:11 PM | #2 |
a fool with no money
Join Date: May 2005
Location: Overton, Tx
Posts: 532
|
Re: water outlet goose neck 73gmc
by thread restorer, I assume you're talking about a thread Tap? or are you talking about a helio-coil? (not sure I spelled that right)
__________________
Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/ |
08-15-2011, 09:38 PM | #3 |
Registered User
Join Date: Feb 2008
Location: Surprise, Ariz.
Posts: 186
|
Re: water outlet goose neck 73gmc
Hi mooseifier, problem solved. Had to drill the holes with a smaller bit and tapped the holes with a thread restorer. Thanks frankyjoe
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|