MN Parting 72 2wd project blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 08-27-2011, 03:21 PM

This is an old listing I am no longer following. PM me if you have questions about parts.

hgs_notes · 08-27-2011, 03:25 PM

deleted

hgs_notes · 08-27-2011, 03:28 PM

deleted

hgs_notes · 08-27-2011, 03:31 PM

deleted

hgs_notes · 08-27-2011, 03:34 PM

deleted

47thriftmaster · 08-27-2011, 08:45 PM

How much for all the top mounting brackets to 28327? Or I could just use the bumpers for the hatch, in pic 10 and 11 of post 4. thenks

71swb4x4 · 08-27-2011, 09:04 PM

I may regret asking this question, but how much for everything? The 2wd frame, front clip, tub, top, everything??

69-72 · 08-27-2011, 10:48 PM

I need a single wall top, where in MN are you?

*454stepside* · 08-27-2011, 11:07 PM

i need all the top hold down parts shipped to 80831 if 47 thrift master passes please might also be interested in the single wall top glass

hgs_notes · 08-27-2011, 11:19 PM

Quote:

Originally Posted by 47thriftmaster

How much for all the top mounting brackets to 28327? Or I could just use the bumpers for the hatch, in pic 10 and 11 of post 4. thenks

I want to keep the brackets with the tops at this point. I might have a spare set in the garage attic. I'll let you know.

Quote:

Originally Posted by 71swb4x4

I may regret asking this question, but how much for everything? The 2wd frame, front clip, tub, top, everything??

I'll PM you.

Quote:

Originally Posted by 69-72

I need a single wall top, where in MN are you?

I'm in Sleepy Eye, which is in the south central part.

Quote:

Originally Posted by 454stepside

i need all the top hold down parts shipped to 80831 if 47 thrift master passes please might also be interested in the single wall top glass

See note above. The glass will go with the top.

*454stepside* · 08-27-2011, 11:29 PM

thanks i was also wondering about the section of rear floor inbetween the wheel wells po cut mine out and tost it if it would help with shipping it could be cut in half also if you want to cut up the body

hgs_notes · 08-27-2011, 11:39 PM

Quote:

Originally Posted by 454stepside

thanks i was also wondering about the section of rear floor inbetween the wheel wells po cut mine out and tost it if it would help with shipping it could be cut in half also if you want to cut up the body

I won't be cutting it up, but that section of floor is the same for trucks and blazers. Just need to add the seat mounts. You might even get that from someone that cut that out of their bed floor for an extreme notch.

*454stepside* · 08-27-2011, 11:56 PM

yeah i know its the same but would rather find one with seat mounts on it all ready lol thanks

hgs_notes · 08-28-2011, 12:17 AM

For top hardware, I have one extra set of the single wall chrome strips for the bed rails, and a pair of the front tabs to the windshield frame. I don't have extra hardware for the rear of the top.

*454stepside* · 08-28-2011, 12:23 AM

how much shipped to 80831 if the other guy passes and any sunvisors by chance color does not matter

hgs_notes · 08-28-2011, 12:41 AM

Quote:

Originally Posted by 454stepside

how much shipped to 80831 if the other guy passes and any sunvisors by chance color does not matter

Shipping quote on those strips will have to wait a day or 2. They are quite long and I'll need to figure out how to package them to keep from getting bent. Figure $150 plus the shipping.

I do have some visors, I'll post some pics and a price in the morning once I can pull them out and clean them up.

*454stepside* · 08-28-2011, 12:58 AM

dont need to clean them up but thanks let me know and i have the perfect package to ship them in lol my bed angle strips came in a round cardboard tube thanks

**nightmare** · 08-28-2011, 01:06 AM

it looks like you still have the tailgate seal brackets still bolted to the sides. I only really need one of them, but how much for both, shipped to 77084?

hgs_notes · 08-28-2011, 01:09 AM

Quote:

Originally Posted by 454stepside

dont need to clean them up but thanks let me know and i have the perfect package to ship them in lol my bed angle strips came in a round cardboard tube thanks

I would clean them to check the condition.

Quote:

Originally Posted by nightmare

it looks like you still have the tailgate seal brackets still bolted to the sides. I only really need one of them, but how much for both, shipped to 77084?

I have an extra set of those, $17.50 shipped.

**nightmare** · 08-28-2011, 11:06 AM

Quote:

Originally Posted by hgs_notes

I have an extra set of those, $17.50 shipped.

Are they straight? Can I get pics of them? Thanks

hgs_notes · 08-28-2011, 11:35 AM

Quote:

Originally Posted by nightmare

Are they straight? Can I get pics of them? Thanks

Yep, they're straight.

hgs_notes · 08-28-2011, 11:40 AM

deleted

sinister72 · 08-29-2011, 09:41 PM

If you cut any of the passenger bedside ,i need the section just behind the rear wheel from the crease down. Also would love to have the roll bar.

*454stepside* · 08-29-2011, 10:01 PM

any rips or tears or stitches coming apart in the visors

stilesjimmy · 08-30-2011, 01:00 AM

Ill take the visors if 454 doesnt. If they get to me how much shipped to 92274. Thanks, Jon

08-27-2011, 03:21 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Parting 72 2wd project blazer This is an old listing I am no longer following. PM me if you have questions about parts. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:08 PM.

08-27-2011, 03:25 PM	#2
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer deleted __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:03 PM.

08-27-2011, 03:28 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer deleted __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:04 PM.

08-27-2011, 03:31 PM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer deleted __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:04 PM.

08-27-2011, 03:34 PM	#5
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer deleted __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:04 PM.

08-27-2011, 08:45 PM	#6
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Parting 72 2wd project blazer How much for all the top mounting brackets to 28327? Or I could just use the bumpers for the hatch, in pic 10 and 11 of post 4. thenks

08-27-2011, 09:04 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Parting 72 2wd project blazer I may regret asking this question, but how much for everything? The 2wd frame, front clip, tub, top, everything?? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-27-2011, 10:48 PM	#8
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Parting 72 2wd project blazer I need a single wall top, where in MN are you? __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

08-27-2011, 11:07 PM	#9
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer i need all the top hold down parts shipped to 80831 if 47 thrift master passes please might also be interested in the single wall top glass

08-27-2011, 11:29 PM	#11
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer thanks i was also wondering about the section of rear floor inbetween the wheel wells po cut mine out and tost it if it would help with shipping it could be cut in half also if you want to cut up the body

08-27-2011, 11:56 PM	#13
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer yeah i know its the same but would rather find one with seat mounts on it all ready lol thanks

08-28-2011, 12:17 AM	#14
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer For top hardware, I have one extra set of the single wall chrome strips for the bed rails, and a pair of the front tabs to the windshield frame. I don't have extra hardware for the rear of the top. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

08-28-2011, 12:23 AM	#15
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer how much shipped to 80831 if the other guy passes and any sunvisors by chance color does not matter

08-28-2011, 12:58 AM	#17
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer dont need to clean them up but thanks let me know and i have the perfect package to ship them in lol my bed angle strips came in a round cardboard tube thanks

08-28-2011, 11:40 AM	#22
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parting 72 2wd project blazer deleted __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 10-21-2012 at 11:05 PM.



Register or Log In To remove these advertisements.

08-29-2011, 09:41 PM	#23
sinister72 Registered User Join Date: Apr 2002 Location: Bowling Green, kentucky Posts: 182	Re: Parting 72 2wd project blazer If you cut any of the passenger bedside ,i need the section just behind the rear wheel from the crease down. Also would love to have the roll bar. __________________ 72 chevy C-10 swb fleetside,402 BB.700r4,buckets,console.etc. 72 Blazer CST 350,AT, new project 1971 Chevy Nova ,355 SB blow through turbo in works.

08-29-2011, 10:01 PM	#24
454stepside Account Suspended Join Date: Dec 2010 Location: Falcon Colorado Posts: 1,029	Re: Parting 72 2wd project blazer any rips or tears or stitches coming apart in the visors

08-30-2011, 01:00 AM	#25
stilesjimmy Registered User Join Date: Sep 2010 Location: la quinta Posts: 14	Re: Parting 72 2wd project blazer Ill take the visors if 454 doesnt. If they get to me how much shipped to 92274. Thanks, Jon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.