Power steering conversion question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77c10 · 09-19-2011, 08:44 AM

I have a 77 C10 2wd that I would like to convert to power steering. The previous owner installed a LT1 crate motor. Any idea where I would look for the correct brackets to mount the pump? Also, I am assuming I would need to get a pump that came from an LT1 originally to mount with the LT1 brackets. Can any shed any light on this?

Thanks

Jonboy · 09-19-2011, 02:47 PM

You would use the LT1 pump and hoses. You might need an adapter to mate the hoses to your p/s box.

09-19-2011, 08:44 AM	#1
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Power steering conversion question I have a 77 C10 2wd that I would like to convert to power steering. The previous owner installed a LT1 crate motor. Any idea where I would look for the correct brackets to mount the pump? Also, I am assuming I would need to get a pump that came from an LT1 originally to mount with the LT1 brackets. Can any shed any light on this? Thanks

09-19-2011, 02:47 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Power steering conversion question You would use the LT1 pump and hoses. You might need an adapter to mate the hoses to your p/s box. __________________ 1974 Jimmy- 5.3/4L80e/NP241

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.