KS 72 cheyenne getting parted now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spatz · 09-29-2011, 09:11 PM

parts recieved, thanks again Randy..everything taken care of w/ a little extra for your time.

teeitup · 10-01-2011, 05:33 PM

Duane, THANK YOU, I'm headed to town in morning to find a box to ship it in

Brandon, sure do $20 for one.

Thanks Randy

johnechi · 10-01-2011, 09:16 PM

Hey Randy, I just got the front turn signal assemblies today. They look great! Thanks again!

HeavyMetalChevy · 10-01-2011, 09:28 PM

Quote:

Originally Posted by teeitup

Duane, THANK YOU, I'm headed to town in morning to find a box to ship it in

Brandon, sure do $20 for one.

Thanks Randy

Good deal.. much more to come in the future!!! get back to me on heater controls when you run across something decent...Like I mentioned before... levers and knobs I am not concerned with just good chrome housings/bezel and I have plenty of extra levers and such just need the assembly in good shape

**burb71** · 09-30-2011, 07:19 PM

Randy is the step rear bumper sold? if not how much?
Can you just tape a address lable to it and ship is is

shouldaknown · 10-01-2011, 08:42 AM

do you have a gear box to go with it?

oldblue1968chevy · 10-01-2011, 10:39 PM

Got any SBC spark plug wire (complete set) for ramhorns? Looking to run the wires in under the manifolds so they are out of sight. Relaly would like a complete set.

shouldaknown · 10-01-2011, 10:56 PM

I'll take them Randy. When's good for you to pick them up?

hexafamily · 10-02-2011, 12:13 PM

IF the alt brackets are still available, I'll take them, just send me your pay pal info.
Thanks
Don

**Don Brace** · 10-02-2011, 06:33 PM

Randy do you have the large nut that goes on the antenna?

teeitup · 10-02-2011, 06:46 PM

John, glad they got there safely and THANKS

Duane, I'll get pics of what I have in a bit

Oldblue, sorry no sets of wires right now

Brandon, Pm sent

hexafamily, still have them I'll pm you info

Don Brace, Don, sorry none right now

Thanks Randy

HeavyMetalChevy · 10-02-2011, 07:30 PM

Quote:

Originally Posted by teeitup

John, glad they got there safely and THANKS

Duane, I'll get pics of what I have in a bit

Oldblue, sorry no sets of wires right now

Brandon, Pm sent

hexafamily, still have them I'll pm you info

Don Brace, Don, sorry none right now

Thanks Randy

teeitup is the man!!! lol

oldblue1968chevy · 10-02-2011, 07:56 PM

Im sorry, not sparkplug wires. The looms that will hold the wires so that I can route them under the ramhorns

Sorry

teeitup · 10-02-2011, 08:33 PM

Oldblue, John, sorry went out and looked I don't have a complete set, missing 2 of the lower clips. Thanks Randy

teeitup · 10-02-2011, 08:39 PM

burb71, Steve, here are the only 2 I have. Not sure about the grey one it looks like a ford but was on one of our years. The white one was on our years too but stuck under the back lip a little

teeitup · 10-02-2011, 08:42 PM

Duane, this is what I have, some are separated, some have screws in them and broken arms. Thanks Randy

teeitup · 10-02-2011, 08:42 PM

last 2

bryankichler · 10-02-2011, 08:57 PM

Received posi unit in great shape awesome guy to work with look forward to dealing with you again

**burb71** · 10-05-2011, 11:00 AM

Randy one more thing I need... a patch panel of the rear pass side of the bed side.
Say about a 12" inch long and full top to bottom rear bed section, from the rear lights forward to inside the bed about 12".

Also please send pics and price of the step bumper you have.
Thanks, Steve

oldblue1968chevy · 10-02-2011, 09:56 PM

How much for the pieces you have? And they ARE designed to run the wires under the manifolds?

teeitup · 10-02-2011, 10:01 PM

Bryankichler, glad your happy with it and it got there safely, THANKS

Hubscrub, THANK YOU for the kind words!!!!

Oldblue, John, are you needing all the plug heat shields and holders or just the small lower holders and 2 holders on rear of motor? I can get pics Mon after work

Thanks Randy

oldblue1968chevy · 10-02-2011, 10:48 PM

This is how I wanna run my wires, I bought vette wires for a 76 vette

I'll take what I can get? LOL

Bears63 · 10-03-2011, 09:40 AM

Randy, do you still have the water pump pulley, crankshaft pulleys, fan, and spacer?

**Cash3481** · 10-03-2011, 10:42 AM

Randy,
I'm looking for trans linkage for my 72 402/400 BBC swb truck and also the rear drive shaft from the carrier bearing to the rear end. Let me know if you have either of them and I can drive up there and get them from you. If you only have the trans linkage I will have you ship it to me.
Thanks in advance!
Cash3481

**72peace** · 10-03-2011, 11:11 AM

Randy,

I'm looking for the couple of screws and sleeves that go in the door under the vent windows just on 72's, the P/O removed them to paint and never put them back. I can't find them on any parts site.

Thanks,

09-29-2011, 09:11 PM	#1
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: 72 cheyenne getting parted now parts recieved, thanks again Randy..everything taken care of w/ a little extra for your time.

10-01-2011, 05:33 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Duane, THANK YOU, I'm headed to town in morning to find a box to ship it in Brandon, sure do $20 for one. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2011, 09:16 PM	#3
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: 72 cheyenne getting parted now Hey Randy, I just got the front turn signal assemblies today. They look great! Thanks again!

09-30-2011, 07:19 PM	#5
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: 72 cheyenne getting parted now Randy is the step rear bumper sold? if not how much? Can you just tape a address lable to it and ship is is

10-01-2011, 08:42 AM	#6
shouldaknown Registered User Join Date: Aug 2011 Location: Topeka, KS Posts: 25	Re: 72 cheyenne getting parted now do you have a gear box to go with it?

10-01-2011, 10:39 PM	#7
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now Got any SBC spark plug wire (complete set) for ramhorns? Looking to run the wires in under the manifolds so they are out of sight. Relaly would like a complete set. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-01-2011, 10:56 PM	#8
shouldaknown Registered User Join Date: Aug 2011 Location: Topeka, KS Posts: 25	Re: 72 cheyenne getting parted now I'll take them Randy. When's good for you to pick them up?

10-02-2011, 12:13 PM	#9
hexafamily Registered User Join Date: Sep 2003 Location: Lee's Summit MO 64086 (Kansas City) Posts: 128	Re: 72 cheyenne getting parted now IF the alt brackets are still available, I'll take them, just send me your pay pal info. Thanks Don __________________ Thanks Don '57 Chevy Nomad '70 Buick GSX '72 Cheyene (Boys' truck)

10-02-2011, 06:33 PM	#10
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 72 cheyenne getting parted now Randy do you have the large nut that goes on the antenna? __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

10-02-2011, 06:46 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now John, glad they got there safely and THANKS Duane, I'll get pics of what I have in a bit Oldblue, sorry no sets of wires right now Brandon, Pm sent hexafamily, still have them I'll pm you info Don Brace, Don, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 07:56 PM	#13
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now Im sorry, not sparkplug wires. The looms that will hold the wires so that I can route them under the ramhorns Sorry __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-02-2011, 08:33 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Oldblue, John, sorry went out and looked I don't have a complete set, missing 2 of the lower clips. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 08:39 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now burb71, Steve, here are the only 2 I have. Not sure about the grey one it looks like a ford but was on one of our years. The white one was on our years too but stuck under the back lip a little Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 08:42 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Duane, this is what I have, some are separated, some have screws in them and broken arms. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 08:57 PM	#18
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: 72 cheyenne getting parted now Received posi unit in great shape awesome guy to work with look forward to dealing with you again



Register or Log In To remove these advertisements.

10-05-2011, 11:00 AM	#19
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: 72 cheyenne getting parted now Randy one more thing I need... a patch panel of the rear pass side of the bed side. Say about a 12" inch long and full top to bottom rear bed section, from the rear lights forward to inside the bed about 12". Also please send pics and price of the step bumper you have. Thanks, Steve

10-02-2011, 09:56 PM	#20
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now How much for the pieces you have? And they ARE designed to run the wires under the manifolds? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-02-2011, 10:01 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 cheyenne getting parted now Bryankichler, glad your happy with it and it got there safely, THANKS Hubscrub, THANK YOU for the kind words!!!! Oldblue, John, are you needing all the plug heat shields and holders or just the small lower holders and 2 holders on rear of motor? I can get pics Mon after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 10:48 PM	#22
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now This is how I wanna run my wires, I bought vette wires for a 76 vette I'll take what I can get? LOL Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-03-2011, 09:40 AM	#23
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 72 cheyenne getting parted now Randy, do you still have the water pump pulley, crankshaft pulleys, fan, and spacer? __________________ Mike "Bear" Shea

10-03-2011, 10:42 AM	#24
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 72 cheyenne getting parted now Randy, I'm looking for trans linkage for my 72 402/400 BBC swb truck and also the rear drive shaft from the carrier bearing to the rear end. Let me know if you have either of them and I can drive up there and get them from you. If you only have the trans linkage I will have you ship it to me. Thanks in advance! Cash3481

10-03-2011, 11:11 AM	#25
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: 72 cheyenne getting parted now Randy, I'm looking for the couple of screws and sleeves that go in the door under the vent windows just on 72's, the P/O removed them to paint and never put them back. I can't find them on any parts site. Thanks,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.