Any vendors here have this part? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 09-20-2011, 12:39 PM

I need short box rear quarters for a fleetside box. I am not looking for complete box sides. I know they don't make this patch anymore but some vendor somewhere must have some stock. I need both sides and possibly the front half as well.

Anyone know of any?

**Classic Heartbeat** · 09-20-2011, 01:51 PM

There were Blazer bed halves made qt one time, and I think that LMC even still sells the front halves. However I haven't seen any specificly for the short fleetside beds. The rear lower quarter sections were made at on time, but were junk in my opinion. Like the long bed rear lower quarters they didn't have the line in the wheelwell or the recess that is under the bumper. You will be far better off with new bedsides or good orignals. Good luck. WES

72gmcshorty · 09-20-2011, 05:35 PM

unfortunately as we know, short bed sides and rust free blazer sides are hard enough to find (plus cost prohibitive to get across the border) and i need the blazer box sides. Cutting up a new short bed side is also costly...

72gmcshorty · 09-20-2011, 06:00 PM

can someone tell me what this part is then?

http://www.classicparts.com/1967-72-...ctinfo/45-742/

http://www.classicparts.com/1967-72-...ctinfo/45-741/

**Tim Christian** · 09-20-2011, 06:44 PM

The part you are looking for????

72gmcshorty · 09-21-2011, 12:39 AM

ahh, but is it? i spoke to someone there and they said it doesn't include the tailight area?

68 TT · 09-21-2011, 11:57 AM

Quote:

Originally Posted by 72gmcshorty

ahh, but is it? i spoke to someone there and they said it doesn't include the tailight area?

Well that sucks. I could have used that part to fix my damaged tail light surrounds and to do the back half of the shortbed conversion at the same time.

**Tim Christian** · 09-21-2011, 01:10 PM

Even on the old ones they wraped around but was not cut out for the back up or tailights ???? Also like Wes said they was a poorley stamped part.

**Classic Heartbeat** · 09-21-2011, 01:10 PM

They are thin tin too...

WES

mbgmike · 09-21-2011, 06:22 PM

we sell ones made in america.They wrap around the back. They do not have cutouts for lights.They are good quality and if not we always refund if not satisfied. front and backs to.

72gmcshorty · 09-21-2011, 10:54 PM

Quote:

Originally Posted by mbgmike

we sell ones made in america.They wrap around the back. They do not have cutouts for lights.They are good quality and if not we always refund if not satisfied. front and backs to.

Any chance you can post a pic of the part that wraps around so i can see if it's enough?

09-20-2011, 12:39 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Any vendors here have this part? I need short box rear quarters for a fleetside box. I am not looking for complete box sides. I know they don't make this patch anymore but some vendor somewhere must have some stock. I need both sides and possibly the front half as well. Anyone know of any? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-20-2011, 01:51 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: Any vendors here have this part? There were Blazer bed halves made qt one time, and I think that LMC even still sells the front halves. However I haven't seen any specificly for the short fleetside beds. The rear lower quarter sections were made at on time, but were junk in my opinion. Like the long bed rear lower quarters they didn't have the line in the wheelwell or the recess that is under the bumper. You will be far better off with new bedsides or good orignals. Good luck. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

09-20-2011, 05:35 PM	#3
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Any vendors here have this part? unfortunately as we know, short bed sides and rust free blazer sides are hard enough to find (plus cost prohibitive to get across the border) and i need the blazer box sides. Cutting up a new short bed side is also costly... __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-20-2011, 06:00 PM	#4
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Any vendors here have this part? can someone tell me what this part is then? http://www.classicparts.com/1967-72-...ctinfo/45-742/ http://www.classicparts.com/1967-72-...ctinfo/45-741/ __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-20-2011, 06:44 PM	#5
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Any vendors here have this part? The part you are looking for????

09-21-2011, 12:39 AM	#6
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Any vendors here have this part? ahh, but is it? i spoke to someone there and they said it doesn't include the tailight area? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-21-2011, 01:10 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Any vendors here have this part? Even on the old ones they wraped around but was not cut out for the back up or tailights ???? Also like Wes said they was a poorley stamped part.

09-21-2011, 06:22 PM	#10
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Any vendors here have this part? we sell ones made in america.They wrap around the back. They do not have cutouts for lights.They are good quality and if not we always refund if not satisfied. front and backs to. Last edited by mbgmike; 09-21-2011 at 07:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.