CA rust free cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikewarme · 09-25-2011, 01:43 PM

I have a clean cab . Was a big block truck with a/c. Has holes for factory headliner and tabs for rear cab molding. Someone put holes in kick panels for speakers. Uncut dash at radio.

$400 or trade for 67/68 chevy truck cab!

Burbank Ca

1cool69 · 09-25-2011, 09:59 PM

Any pics?
Im looking for a clean cab, and im not to far from you.thanks

mikewarme · 09-25-2011, 11:18 PM

The cab is buried for the most part in the garage. Going to be 2 weeks till i get to it. I can promise you it has no rust in the floor, supports, rockers, cab corners, firewall etc. Only thing I can't see is the hinge pillar area as they rust inside out always.

1cool69 · 09-26-2011, 10:20 PM

What year is the cab? Also, is it just the bare cab?thanks

mikewarme · 09-26-2011, 11:00 PM

69 year . Yes it is bare.
Posted via Mobile Device

mikewarme · 09-28-2011, 11:27 PM

found these photos in my hard drive. 5 years ago and since than it has been in my gaRAGE and is completely bare as far as parts bolted on

mikewarme · 09-28-2011, 11:29 PM

No pin holes anywhere on this cab that I could find! and im picky! And the reason im selling is because the frame I have is a 67 and I want to find a 67 cab. So I would even consider a trade.

mikewarme · 10-03-2011, 11:27 AM

Anybody?
Posted via Mobile Device

68Mike · 10-03-2011, 12:01 PM

Great price...I just wish I had the room!
Posted via Mobile Device

**72k5zl1** · 10-03-2011, 12:16 PM

if i were closer i would take it. anybody headed east?

**67cheby** · 10-03-2011, 02:59 PM

holy smokes this is a steal , why hasnt anyone bought this ??

no moa · 10-03-2011, 03:05 PM

Quote:

Originally Posted by 72k5zl1

if i were closer i would take it. anybody headed east?

I was thinking the same thing!

maybe all us New England guys need to get together, find a long distance trucker and send him out to get us some cabs.

BHyatt · 10-03-2011, 10:05 PM

How much does a cab weigh? Can you Pm me a zip code?

Vintage Windmills · 10-03-2011, 10:12 PM

Quote:

Originally Posted by mikewarme

Anybody?
Posted via Mobile Device

Do you have any trips planned up to the bay area or further north? I have a friend up there.

67-72trucks · 10-03-2011, 10:47 PM

nice cab

spatz · 10-05-2011, 12:23 AM

clear title or no title on the cab?

mahanian · 10-05-2011, 02:21 AM

I have a 67 small window cab with 67 doors and 67 vent windows, but it needs rust repair. Are you only looking for a rust free 67 cab or open to others?

BHyatt · 10-05-2011, 06:50 PM

I would like to know how much it weighs so that I could do some research on shipping. This is exactly what I need.

spatz · 10-05-2011, 07:02 PM

I am also interested in the cab

Ram-Man · 10-16-2011, 05:23 PM

Pending the pics this may be mine

mikewarme · 10-16-2011, 08:15 PM

Email is Mikewarme@yahoo.com sorry guys for not responding i wasnt getting email notifications! I don't have a way of weighing this so ram-man my idea is u-ship.com. It will have to be lift gated I don't have a lift gate or a ton of help to load it. More than likely I will have to build a pallet for this as a regular pallet will not suffice!

bigrigpardo · 10-17-2011, 09:45 PM

does it have original rockers. has it had any repairs before?

69C10@16 · 10-18-2011, 11:36 PM

Ive got a 67 Big Window cab no title. If you'd be interested in a trade plus some cash I can get you some pictures.

sheldon · 11-01-2011, 05:48 PM

Holy cow!!! This is perfect. I'm emailing you also, but I'm working on getting the trip together!
Posted via Mobile Device

**master 1969 c10** · 11-01-2011, 08:13 PM

the cab weight is around 600lbs I had one ship from scottsdale ,az to columbus,oh using ups freight at work we ship alot with ups with our discount i payed like $530. dollars my buddys in az did build a oversize palet to ship it on

09-25-2011, 01:43 PM	#1
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	rust free cab I have a clean cab . Was a big block truck with a/c. Has holes for factory headliner and tabs for rear cab molding. Someone put holes in kick panels for speakers. Uncut dash at radio. $400 or trade for 67/68 chevy truck cab! Burbank Ca

09-25-2011, 09:59 PM	#2
1cool69 Registered User Join Date: Aug 2011 Location: San Fernando Valley, California Posts: 24	Re: rust free cab Any pics? Im looking for a clean cab, and im not to far from you.thanks

09-25-2011, 11:18 PM	#3
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab The cab is buried for the most part in the garage. Going to be 2 weeks till i get to it. I can promise you it has no rust in the floor, supports, rockers, cab corners, firewall etc. Only thing I can't see is the hinge pillar area as they rust inside out always.

09-26-2011, 10:20 PM	#4
1cool69 Registered User Join Date: Aug 2011 Location: San Fernando Valley, California Posts: 24	Re: rust free cab What year is the cab? Also, is it just the bare cab?thanks

09-26-2011, 11:00 PM	#5
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab 69 year . Yes it is bare. Posted via Mobile Device

09-28-2011, 11:27 PM	#6
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab found these photos in my hard drive. 5 years ago and since than it has been in my gaRAGE and is completely bare as far as parts bolted on Attached Images

09-28-2011, 11:29 PM	#7
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab No pin holes anywhere on this cab that I could find! and im picky! And the reason im selling is because the frame I have is a 67 and I want to find a 67 cab. So I would even consider a trade.

10-03-2011, 11:27 AM	#8
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab Anybody? Posted via Mobile Device

10-03-2011, 12:01 PM	#9
68Mike Registered User Join Date: Jan 2007 Location: Salinas,Ca 93906 Posts: 502	Re: rust free cab Great price...I just wish I had the room! Posted via Mobile Device __________________ Mike Currents: '74 Cheyenne Super C30 Camper Special 3+3 aka "Sucia30" Past: '79 C10 BIG 10 (Sold) 69 CST LWB - Always a "Work in progress" true work truck (stolen) 05 GSXR 750 it has a pretty paint job _wrecked 72 SWB full frame restoration -sold! 71 CST K5 Blazer 4x4 (soon to be 2wd)-project - sold! C10 Club 2012 Brothers Show Video http://youtu.be/pUeV2vP7Wpo

10-03-2011, 12:16 PM	#10
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: rust free cab if i were closer i would take it. anybody headed east? __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

10-03-2011, 02:59 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: rust free cab holy smokes this is a steal , why hasnt anyone bought this ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2011, 10:05 PM	#13
BHyatt Registered User Join Date: Jul 2007 Location: New Castle, IN Posts: 199	Re: rust free cab How much does a cab weigh? Can you Pm me a zip code?

10-03-2011, 10:47 PM	#15
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: rust free cab nice cab

10-05-2011, 12:23 AM	#16
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: rust free cab clear title or no title on the cab?

10-05-2011, 02:21 AM	#17
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: rust free cab I have a 67 small window cab with 67 doors and 67 vent windows, but it needs rust repair. Are you only looking for a rust free 67 cab or open to others? __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

10-05-2011, 06:50 PM	#18
BHyatt Registered User Join Date: Jul 2007 Location: New Castle, IN Posts: 199	Re: rust free cab I would like to know how much it weighs so that I could do some research on shipping. This is exactly what I need.

10-05-2011, 07:02 PM	#19
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: rust free cab I am also interested in the cab

10-16-2011, 05:23 PM	#20
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: rust free cab Pending the pics this may be mine __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

10-16-2011, 08:15 PM	#21
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab Email is Mikewarme@yahoo.com sorry guys for not responding i wasnt getting email notifications! I don't have a way of weighing this so ram-man my idea is u-ship.com. It will have to be lift gated I don't have a lift gate or a ton of help to load it. More than likely I will have to build a pallet for this as a regular pallet will not suffice!

10-17-2011, 09:45 PM	#22
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: rust free cab does it have original rockers. has it had any repairs before?

10-18-2011, 11:36 PM	#23
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Re: rust free cab Ive got a 67 Big Window cab no title. If you'd be interested in a trade plus some cash I can get you some pictures.

11-01-2011, 05:48 PM	#24
sheldon Registered User Join Date: Oct 2010 Location: College station TX/ soon to be Austin Posts: 51	Re: rust free cab Holy cow!!! This is perfect. I'm emailing you also, but I'm working on getting the trip together! Posted via Mobile Device __________________ Half of all people are below average, where do you fall in?

11-01-2011, 08:13 PM	#25
master 1969 c10 Active Member Join Date: Oct 2009 Location: Columbus Ohio Posts: 157	Re: rust free cab the cab weight is around 600lbs I had one ship from scottsdale ,az to columbus,oh using ups freight at work we ship alot with ups with our discount i payed like $530. dollars my buddys in az did build a oversize palet to ship it on

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.