What did you get done 9/25/2011 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 09-25-2011, 09:17 PM

This weekend there was a swap meet near me so i went and scored a new dash pad for the truck, bought a new seat to recover and some other small parts.. i have yet to do any of the work tho,, how about you all?

bigwheel15 · 09-25-2011, 10:15 PM

I finally got the underhood all cleaned, painted and wiring hidden. Waiting on the motor to be put together then drop it in.

85burb · 09-25-2011, 11:32 PM

I managed to burn up so gas and maybe a little tire... Drove my burb to the east texas state fair twice. To my work once to reset the alarm due to a box crossing lazer beams with the wind.

BIG V · 09-25-2011, 11:34 PM

I finally cut my shortbed 4x4 frame and cut my suburban frame and welded them together to use as the frame on my wife's 1974 crew cab short bed 4x4 I'm building her. Its comming along slowly but its getting done....

SCOTI · 09-26-2011, 12:13 AM

I sold some C30 spindles, a new flip kit, & AOL set-up I had purchased for the dually to another board member (texassquarebodies).

I got a little driveway time Sat & finally got some color on the motor. Still need to do some touch-up work as the color was a little thin in a couple of spots. It did look pretty decent as is but those thin areas bother me

. I also mocked up the serpentine set-up to get an idea on how to move forward. A couple of buddies came by to check on my progress & gave me the thumbs-up

.

Kerlijah · 09-26-2011, 01:31 AM

Got a bunch of work done helping my folks remodel the house they're moving into...didnt get anything done on my truck. Would have, I was gonna get a few parts I've been meaning to get, but when I walked out of my apartment this morning, I discovered that my truck was gone!! This crazy psycho b!@ch in my complex apparently hates the fact that I drive an old bucket of bolts instead of a nice car like everybody else here, she's had it out for me since the day she moved in, so last night she called and had my truck towed outta here because I parked in front of my garage and forgot to move it!!!!! So yeah, that stupid horrible worthless female just screwed me out of half of my damn paycheck, cost me almost $300 to get my truck back from the tow company. What do yall think, should I hotwire her car, park it in front of her garage, and then call and have it towed? lol god I freakin hate living in the city!!

MalibuSSwagon · 09-26-2011, 01:38 AM

Figured out what all the oil spattered on the front of my trailer was from.

gear oil. Lots of it dripping out. The cover had a couple of pin holes rusted right thru.

So painted up a new cover, then got it covered in body filler dust and slapped it on.

Fresh gear oil and done.

flamingbig10 · 09-26-2011, 02:00 AM

got my 6 liter to run again had some wiring and fuel shortage problems

YouTube

Fixwhataintbroke · 09-26-2011, 02:11 AM

just went to a local swap meet

ramz · 09-26-2011, 09:24 AM

Got the tranmission resealed but now it wont start.......

turns over and even used starting fluid.

overloaded · 09-26-2011, 09:30 AM

cleaned the garage, swapped batteries in the k20 so my new one doesn't get stolen while the insurance adjuster has it in the lot...debated swapping my header, offy intake and q-jet back to stock but that seemed like a lot of work for a truck I'll probably be getting back in a week anyway...

Still trying to put a deal together on the K30 crew cab, but seller is kinda hard to work with.

overloaded · 09-26-2011, 09:31 AM

Quote:

Originally Posted by ramz

Got the tranmission resealed but now it wont start.......

turns over and even used starting fluid.

maybe put the starting fluid in the carburetor, not the trans?

foamypirate · 09-26-2011, 10:51 AM

Finally got the bed off my frame-up restore so I can get crackin' on the rear part of the frame. Also got the shocks removed and gave the frame an initial rinsing. Next up? Shackle and hanger kit install. The picture, of course, is before cleaning and shock removal. I've been thoroughly impressed, I haven't had a single bolt fight me yet. Even the bed bolts came out without stripping the holes, and the U-bolt nuts loosened up with no problems.

09-25-2011, 09:17 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done 9/25/2011 edition This weekend there was a swap meet near me so i went and scored a new dash pad for the truck, bought a new seat to recover and some other small parts.. i have yet to do any of the work tho,, how about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-25-2011, 10:15 PM	#2
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: What did you get done 9/25/2011 edition I finally got the underhood all cleaned, painted and wiring hidden. Waiting on the motor to be put together then drop it in.

09-25-2011, 11:32 PM	#3
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: What did you get done 9/25/2011 edition I managed to burn up so gas and maybe a little tire... Drove my burb to the east texas state fair twice. To my work once to reset the alarm due to a box crossing lazer beams with the wind. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

09-25-2011, 11:34 PM	#4
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: What did you get done 9/25/2011 edition I finally cut my shortbed 4x4 frame and cut my suburban frame and welded them together to use as the frame on my wife's 1974 crew cab short bed 4x4 I'm building her. Its comming along slowly but its getting done.... Attached Images __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd Last edited by BIG V; 09-25-2011 at 11:35 PM. Reason: information

09-26-2011, 12:13 AM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: What did you get done 9/25/2011 edition I sold some C30 spindles, a new flip kit, & AOL set-up I had purchased for the dually to another board member (texassquarebodies). I got a little driveway time Sat & finally got some color on the motor. Still need to do some touch-up work as the color was a little thin in a couple of spots. It did look pretty decent as is but those thin areas bother me . I also mocked up the serpentine set-up to get an idea on how to move forward. A couple of buddies came by to check on my progress & gave me the thumbs-up . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-26-2011, 01:31 AM	#6
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: What did you get done 9/25/2011 edition Got a bunch of work done helping my folks remodel the house they're moving into...didnt get anything done on my truck. Would have, I was gonna get a few parts I've been meaning to get, but when I walked out of my apartment this morning, I discovered that my truck was gone!! This crazy psycho b!@ch in my complex apparently hates the fact that I drive an old bucket of bolts instead of a nice car like everybody else here, she's had it out for me since the day she moved in, so last night she called and had my truck towed outta here because I parked in front of my garage and forgot to move it!!!!! So yeah, that stupid horrible worthless female just screwed me out of half of my damn paycheck, cost me almost $300 to get my truck back from the tow company. What do yall think, should I hotwire her car, park it in front of her garage, and then call and have it towed? lol god I freakin hate living in the city!! __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

09-26-2011, 01:38 AM	#7
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: What did you get done 9/25/2011 edition Figured out what all the oil spattered on the front of my trailer was from. gear oil. Lots of it dripping out. The cover had a couple of pin holes rusted right thru. So painted up a new cover, then got it covered in body filler dust and slapped it on. Fresh gear oil and done. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

09-26-2011, 02:11 AM	#9
Fixwhataintbroke Enthusiast Join Date: Jun 2010 Location: Graham, Wa. Posts: 192	Re: What did you get done 9/25/2011 edition just went to a local swap meet __________________ - Cole 1979 Chevy C30 w/ carb 454. 1992 Chevy K1500 w/ tbi 350. Sold 1997 Dodge Ram 1500 w/ Magnum 360 Sold "Good judgment comes from experience. Experience comes from poor judgment." - George Washington

09-26-2011, 09:24 AM	#10
ramz Registered User Join Date: Jul 2011 Location: Dallas, TX Posts: 205	Re: What did you get done 9/25/2011 edition Got the tranmission resealed but now it wont start....... turns over and even used starting fluid.

09-26-2011, 09:30 AM	#11
overloaded Registered User Join Date: Sep 2011 Location: Cincinnati, Ohio Posts: 46	Re: What did you get done 9/25/2011 edition cleaned the garage, swapped batteries in the k20 so my new one doesn't get stolen while the insurance adjuster has it in the lot...debated swapping my header, offy intake and q-jet back to stock but that seemed like a lot of work for a truck I'll probably be getting back in a week anyway... Still trying to put a deal together on the K30 crew cab, but seller is kinda hard to work with.

09-26-2011, 10:51 AM	#13
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: What did you get done 9/25/2011 edition Finally got the bed off my frame-up restore so I can get crackin' on the rear part of the frame. Also got the shocks removed and gave the frame an initial rinsing. Next up? Shackle and hanger kit install. The picture, of course, is before cleaning and shock removal. I've been thoroughly impressed, I haven't had a single bolt fight me yet. Even the bed bolts came out without stripping the holes, and the U-bolt nuts loosened up with no problems.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.