Project: Turbo 250

[longbed67]

The manifold is made by SPA turbo.... If you order it through DEI they are about $150 cheaper than everybody else. but SHHHH dont tell them that or they will jack the price... the only downside is you have to drill and tap new holes and bore the center out for the wastegate due to the fact that Tial wastegates have 2 holes and a 38mm valve and the manifold is setup for some brazilian wastegate that has 3 holes and and a ridiculously smalll valve. you will also have to cut the center out of the flange on the manifold, as it is setup for a split flange turbo and most turbo's that fit this are not split, also as it is, it wont let the front 3 cylinders waste out the wastegate... so by cutting out the center divider all 6 can evenly wasteout rather than just the rear three, it will help keep pressures more equal.