** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 10-16-2011, 12:47 AM

Saturday night picture time.

I spent a while cleaning up the shop and reading the latest Hot Rod magazine, but I did get the fuel filler hoses hooked up finally. (I had to take out the inlet and cut it shorter which meant I had to weld another reducer on to fit the larger new hose) - wasting time.

Then I moved on to fabbing up these crazy little brackets to attach to the axle to attach the ride height sensors to. I'm walking back out to paint them black so they will be dry to put on Sunday.

10-16-2011, 12:47 AM	#11
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Saturday night picture time. I spent a while cleaning up the shop and reading the latest Hot Rod magazine, but I did get the fuel filler hoses hooked up finally. (I had to take out the inlet and cut it shorter which meant I had to weld another reducer on to fit the larger new hose) - wasting time. Then I moved on to fabbing up these crazy little brackets to attach to the axle to attach the ride height sensors to. I'm walking back out to paint them black so they will be dry to put on Sunday. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 12-13-2011 at 12:45 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.