NJ WTB: Rochester 2 barrel carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 08-15-2011, 11:48 PM

Looking for a Roch 2 barrel carb in good working condition.
Would like one with a manual choke that I can bolt on and know it will work properly. Please LMK condition and price including shipping to 08753.

Thanks
Scott

**ScottH** · 08-16-2011, 11:35 PM

ttt

hexafamily · 08-17-2011, 01:26 PM

I have a Rochester two barrel that I just removed from a small block 400. Engine came from a '72 Caprice station wagon that I am using for a project. Has a divorced choke and is in excellent condition, but probably needs a kit from sitting inside for the last several years. I can get pictures if your interested.

Don

Wrenchbender Ret · 08-17-2011, 04:34 PM

There are 2 different size bases on those. The small one was used on the 265-283. The larger one on the bigger/later engines. I have some of the smaller ones with manual choke. It would need to have a kit put in as they have been setting for a long time.
georgec2434@yahoo.com

**ScottH** · 08-17-2011, 05:31 PM

Thanks guys, need one for a 68 307, not sure of the base size.
If u could post pic and LMK price I would appreciate it.

Thanks
Scott

darthwall · 08-18-2011, 02:37 AM

send me a pm I think have what you need

hexafamily · 08-18-2011, 07:58 AM

Looks like the other guys have what you really need, so I'm going to back off unless I hear differently.

Don

**tkeduk8r** · 08-18-2011, 12:17 PM

I found a couple today too.... I also know of one I could get easily off of a 68 307... I am planning on heading up to take a look at it theis afternoon... lemme know if you want pics...
--Mike

**ScottH** · 08-18-2011, 12:38 PM

Mike, thanks for the pics. Would be great if u could take pic of the one on the 68 307.
The others look to be a bit rough and they dont have manual choke so will pass on those.

Thanks
Scott

Wrenchbender Ret · 08-18-2011, 04:16 PM

Does the one you want have the fuel intake line in front like in the photos or on the side? I will get a photo of mine tomorrow.

**ScottH** · 08-18-2011, 04:54 PM

The fuel intake is on the side.

70BLAZERX2 · 08-18-2011, 07:37 PM

I have one off a 70 307 if that will work?

was off my uncles 70 K30 he had up there in pennsville.nj ..lol I have the carb here thats all i have left. mabye it will go back north..

scott check these out,on a parts camaro i got...all 4 14 inch alum. slots...

**ScottH** · 08-18-2011, 07:54 PM

Great, if u could post a pic I would appreciate it.

Gotta love those wheels.

Scott

70BLAZERX2 · 08-18-2011, 07:57 PM

Quote:

Originally Posted by ScottH

Great, if u could post a pic I would appreciate it.

Gotta love those wheels.

Scott

I just knew you would say that...about the wheels...old skool all the way...

i will get the carb out tomorrow....thanks

**tkeduk8r** · 08-19-2011, 12:40 AM

Think I found whatyour looking for.... off of a WA code 68 307 and OE manual choke.... lemme know if this is the correct critter... i did pull it but it was dark before I could get any off the truck pics...
--Mike

PS.. was it you that needed a dipstick tube too???? I pulled that as well....

**ScottH** · 11-10-2011, 01:45 PM

still looking 4 a good running 2 barrel carb

HeavyMetalChevy · 11-10-2011, 05:18 PM

I have one but I am working out the kinks on it

blap · 11-10-2011, 06:36 PM

Have one I took off my daily driver, man choke.
I removed to put a 4bbl on.
I will post a pic tonight

**ScottH** · 11-10-2011, 07:11 PM

sounds good, thanks

**tkeduk8r** · 11-13-2011, 03:06 PM

was that one I pulled off the blue 68 a while back not going to work???? I still have it here if need be....
--Mike

**ScottH** · 11-13-2011, 04:03 PM

Mike, thanks for the offer but looking for one a bit cleaner.
Need one that came off a current runner in good shape.

Thanks
Scott

**jaros44sr** · 11-13-2011, 07:55 PM

Got one you can have Scot

capev86 · 11-13-2011, 08:29 PM

i still have the one off my 72 burb 307. it is hot air choke and includes the intake manifold. i threw a rebuild kit in it but i think it needs just a little tuning (not my forte) to run perfect. only been off the truck since spring 2010 when i switched to a Q-jet. $100 shipped to your door.

[IMG]

[/IMG]

**jaros44sr** · 11-14-2011, 08:38 PM

08-15-2011, 11:48 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	WTB: Rochester 2 barrel carb Looking for a Roch 2 barrel carb in good working condition. Would like one with a manual choke that I can bolt on and know it will work properly. Please LMK condition and price including shipping to 08753. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-16-2011, 11:35 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-17-2011, 01:26 PM	#3
hexafamily Registered User Join Date: Sep 2003 Location: Lee's Summit MO 64086 (Kansas City) Posts: 128	Re: WTB: Rochester 2 barrel carb I have a Rochester two barrel that I just removed from a small block 400. Engine came from a '72 Caprice station wagon that I am using for a project. Has a divorced choke and is in excellent condition, but probably needs a kit from sitting inside for the last several years. I can get pictures if your interested. Don __________________ Thanks Don '57 Chevy Nomad '70 Buick GSX '72 Cheyene (Boys' truck)

08-17-2011, 04:34 PM	#4
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: WTB: Rochester 2 barrel carb There are 2 different size bases on those. The small one was used on the 265-283. The larger one on the bigger/later engines. I have some of the smaller ones with manual choke. It would need to have a kit put in as they have been setting for a long time. georgec2434@yahoo.com

08-17-2011, 05:31 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb Thanks guys, need one for a 68 307, not sure of the base size. If u could post pic and LMK price I would appreciate it. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-18-2011, 02:37 AM	#6
darthwall Registered User Join Date: Mar 2010 Location: washington Posts: 274	Re: WTB: Rochester 2 barrel carb send me a pm I think have what you need

08-18-2011, 07:58 AM	#7
hexafamily Registered User Join Date: Sep 2003 Location: Lee's Summit MO 64086 (Kansas City) Posts: 128	Re: WTB: Rochester 2 barrel carb Looks like the other guys have what you really need, so I'm going to back off unless I hear differently. Don __________________ Thanks Don '57 Chevy Nomad '70 Buick GSX '72 Cheyene (Boys' truck)

08-18-2011, 12:17 PM	#8
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB: Rochester 2 barrel carb I found a couple today too.... I also know of one I could get easily off of a 68 307... I am planning on heading up to take a look at it theis afternoon... lemme know if you want pics... --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-18-2011, 12:38 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb Mike, thanks for the pics. Would be great if u could take pic of the one on the 68 307. The others look to be a bit rough and they dont have manual choke so will pass on those. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-18-2011, 04:16 PM	#10
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: WTB: Rochester 2 barrel carb Does the one you want have the fuel intake line in front like in the photos or on the side? I will get a photo of mine tomorrow.

08-18-2011, 04:54 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb The fuel intake is on the side. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-18-2011, 07:37 PM	#12
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: WTB: Rochester 2 barrel carb I have one off a 70 307 if that will work? was off my uncles 70 K30 he had up there in pennsville.nj ..lol I have the carb here thats all i have left. mabye it will go back north.. scott check these out,on a parts camaro i got...all 4 14 inch alum. slots...

08-18-2011, 07:54 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb Great, if u could post a pic I would appreciate it. Gotta love those wheels. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-19-2011, 12:40 AM	#15
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB: Rochester 2 barrel carb Think I found whatyour looking for.... off of a WA code 68 307 and OE manual choke.... lemme know if this is the correct critter... i did pull it but it was dark before I could get any off the truck pics... --Mike PS.. was it you that needed a dipstick tube too???? I pulled that as well.... Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's Last edited by tkeduk8r; 08-19-2011 at 12:41 AM. Reason: oops

11-10-2011, 01:45 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb still looking 4 a good running 2 barrel carb __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

11-10-2011, 05:18 PM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB: Rochester 2 barrel carb I have one but I am working out the kinks on it __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-10-2011, 06:36 PM	#18
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: WTB: Rochester 2 barrel carb Have one I took off my daily driver, man choke. I removed to put a 4bbl on. I will post a pic tonight

11-10-2011, 07:11 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb sounds good, thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-13-2011, 03:06 PM	#20
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB: Rochester 2 barrel carb was that one I pulled off the blue 68 a while back not going to work???? I still have it here if need be.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

11-13-2011, 04:03 PM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: WTB: Rochester 2 barrel carb Mike, thanks for the offer but looking for one a bit cleaner. Need one that came off a current runner in good shape. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-13-2011, 07:55 PM	#22
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: WTB: Rochester 2 barrel carb Got one you can have Scot __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-13-2011, 08:29 PM	#23
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: WTB: Rochester 2 barrel carb i still have the one off my 72 burb 307. it is hot air choke and includes the intake manifold. i threw a rebuild kit in it but i think it needs just a little tuning (not my forte) to run perfect. only been off the truck since spring 2010 when i switched to a Q-jet. $100 shipped to your door. [IMG][/IMG]

11-14-2011, 08:38 PM	#24
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: WTB: Rochester 2 barrel carb __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.