wilwood d-52 calipers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flamingbig10 · 11-12-2011, 10:18 PM

I running a 12 bolt truck rear end with astro van rotors captain fab brackets, and rear wilwood d-52 calipers for 1 1/4 rotors I having trouble with the outer brake pad rubbing the brake rotor wear the tab lines up with the bottom of the caliper, any one else have this problem or is it just me

rob32472 · 11-12-2011, 10:48 PM

hmmm I am interested to see what others say as I am getting ready to do this swap..... post a pic of issue

flamingbig10 · 11-13-2011, 12:31 PM

The pads are rubbing were the paints is scraped off

**lolife99** · 11-13-2011, 12:36 PM

I would say it's just the difference in the pads that are manufactured today.
I would grind some clearance on it.
Have you looked at any other brands of pads?

**lolife99** · 11-13-2011, 12:38 PM

Could also be the rotor.
I wonder what brand CaptainFab used?

flamingbig10 · 11-13-2011, 12:54 PM

I'm using the brake best rotors from O'rielly auto parts and Ive tried the brake best pads I had for the stock calipers and the do the same thing

**lolife99** · 11-13-2011, 01:24 PM

I wonder if the o.d. of the rotor is larger than an oem rotor.
I find that aftermarket rotors or cheaper rotors seem to be more bulky.
I try to use Wagner brake parts.
You might contact CaptainFab.

flamingbig10 · 11-13-2011, 03:41 PM

I'm going to try a higher end brake rotor and see if it will work

**lolife99** · 11-13-2011, 04:42 PM

Take a tape measure,... and measure the new one before you buy!

n2billet · 11-13-2011, 07:49 PM

I'm running wagner rotors and Wilwood pads on mine with no issues......

flamingbig10 · 11-13-2011, 07:54 PM

I brought the rotor with me, at Orielly's and they only had the brake best in stock they said the Wagner's don't make rotors any more, and went to auto zone and there duralast rotor has a smaller outside diameter, and so I went to pepboys, but the duralast has the smallest od, I was going to return the rotors but I no longer have these boxes and I already painted the rotors.

n2billet · 11-13-2011, 09:50 PM

I went back and looked at my records and I bought Raybestos part # 397 580442R rotors on this truck, the Wagners I used on another truck.......to many projects!

54Caddy · 11-14-2011, 03:46 PM

why dont you just take the rotors and machine the lip off of them easy as that

flamingbig10 · 11-15-2011, 12:57 AM

I went ahead a bought some duralast rotors problem fixed

**N2TRUX** · 11-15-2011, 11:46 AM

Make sure you get this info to CaptFab. He might be able to make adjustments on his next run of parts.

SBTork · 11-15-2011, 07:00 PM

Quote:

Originally Posted by flamingbig10

I went ahead a bought some duralast rotors problem fixed

I assume the duralast rotors did not have the raised outer portion?

skeeterbug · 11-16-2011, 01:11 PM

I had the same issue with the same brand of rotors brake best from oriely and wagner pads. wore the paint off my rotors just like your pic, i ended up modying the pads. will def try different rotors next time good info. The only issue im still having is having to use alot of wheel spacer to use my 15 x 10" draglites @ the strip, sucks pretty bad, scared drivers side wilwood caliper very deep. no probs when im running my street shoes (20 x 8.5 fr, 22 x 9 rear coys) of course. good luck

11-12-2011, 10:18 PM	#1
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	wilwood d-52 calipers I running a 12 bolt truck rear end with astro van rotors captain fab brackets, and rear wilwood d-52 calipers for 1 1/4 rotors I having trouble with the outer brake pad rubbing the brake rotor wear the tab lines up with the bottom of the caliper, any one else have this problem or is it just me __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-12-2011, 10:48 PM	#2
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: wilwood d-52 calipers hmmm I am interested to see what others say as I am getting ready to do this swap..... post a pic of issue

11-13-2011, 12:31 PM	#3
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: wilwood d-52 calipers The pads are rubbing were the paints is scraped off __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-13-2011, 12:36 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood d-52 calipers I would say it's just the difference in the pads that are manufactured today. I would grind some clearance on it. Have you looked at any other brands of pads? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-13-2011, 12:38 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood d-52 calipers Could also be the rotor. I wonder what brand CaptainFab used? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-13-2011, 12:54 PM	#6
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: wilwood d-52 calipers I'm using the brake best rotors from O'rielly auto parts and Ive tried the brake best pads I had for the stock calipers and the do the same thing __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-13-2011, 01:24 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood d-52 calipers I wonder if the o.d. of the rotor is larger than an oem rotor. I find that aftermarket rotors or cheaper rotors seem to be more bulky. I try to use Wagner brake parts. You might contact CaptainFab. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-13-2011, 03:41 PM	#8
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: wilwood d-52 calipers I'm going to try a higher end brake rotor and see if it will work __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-13-2011, 04:42 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood d-52 calipers Take a tape measure,... and measure the new one before you buy! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-13-2011, 07:49 PM	#10
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: wilwood d-52 calipers I'm running wagner rotors and Wilwood pads on mine with no issues...... __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

11-13-2011, 07:54 PM	#11
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: wilwood d-52 calipers I brought the rotor with me, at Orielly's and they only had the brake best in stock they said the Wagner's don't make rotors any more, and went to auto zone and there duralast rotor has a smaller outside diameter, and so I went to pepboys, but the duralast has the smallest od, I was going to return the rotors but I no longer have these boxes and I already painted the rotors. __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-13-2011, 09:50 PM	#12
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: wilwood d-52 calipers I went back and looked at my records and I bought Raybestos part # 397 580442R rotors on this truck, the Wagners I used on another truck.......to many projects! __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

11-14-2011, 03:46 PM	#13
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: wilwood d-52 calipers why dont you just take the rotors and machine the lip off of them easy as that __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-15-2011, 12:57 AM	#14
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: wilwood d-52 calipers I went ahead a bought some duralast rotors problem fixed __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

11-15-2011, 11:46 AM	#15
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: wilwood d-52 calipers Make sure you get this info to CaptFab. He might be able to make adjustments on his next run of parts. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"



Register or Log In To remove these advertisements.

11-16-2011, 01:11 PM	#17
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: wilwood d-52 calipers I had the same issue with the same brand of rotors brake best from oriely and wagner pads. wore the paint off my rotors just like your pic, i ended up modying the pads. will def try different rotors next time good info. The only issue im still having is having to use alot of wheel spacer to use my 15 x 10" draglites @ the strip, sucks pretty bad, scared drivers side wilwood caliper very deep. no probs when im running my street shoes (20 x 8.5 fr, 22 x 9 rear coys) of course. good luck __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.