The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-18-2011, 11:00 AM   #1
Ben1972swb
Registered User
 
Join Date: Nov 2011
Location: TX
Posts: 3
355 in a 1972 c10 Swb

Just curious to see if anyone knows the proper operating temperature for my small block? I put dual electric fans in it and I don't currently have a thermostat wired in. The fans just come on at key start. I was thinking of running around 190 degrees. It never gets above 150 now and I'm worried that's not hot enough. Also makes it hard for me to get the heater hot... Thoughts?
Posted via Mobile Device
Posted via Mobile Device
Ben1972swb is offline   Reply With Quote
Old 11-18-2011, 11:09 AM   #2
1967wannabe
Registered User
 
1967wannabe's Avatar
 
Join Date: Aug 2011
Location: Houston TX
Posts: 227
Re: 355 in a 1972 c10 Swb

Your fans should definitely be thermostatically controlled but shouldn't make the engine run that cold. What temp is your t-stat?
1967wannabe is offline   Reply With Quote
Old 11-18-2011, 12:29 PM   #3
Ben1972swb
Registered User
 
Join Date: Nov 2011
Location: TX
Posts: 3
Re: 355 in a 1972 c10 Swb

I don't have one yet. She's not a daily driver. Only got about 500 miles on the engine since rebuild. The fans are always on. That's why it runs so cold.
Posted via Mobile Device
Ben1972swb is offline   Reply With Quote
Old 11-18-2011, 12:55 PM   #4
1967wannabe
Registered User
 
1967wannabe's Avatar
 
Join Date: Aug 2011
Location: Houston TX
Posts: 227
Re: 355 in a 1972 c10 Swb

If your running the engine without a thermostat that's why it's so cold, the coolant can't stay in the engine long enough to heat up.
The opposite will occur in the summer time when it's 100 degrees out because the coolant won't stay in the radiator long enough to cool off.
1967wannabe is offline   Reply With Quote
Old 11-18-2011, 05:46 PM   #5
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: 355 in a 1972 c10 Swb

The stock t-stat should be a 180 degree.

Huck one in there pronto...

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Reply

Bookmarks

Tags
1972, 350, box, short, thermostat

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com