pics of 59-60 impala dash in your c10

[layedout68]

here is my instal in my 68

[layedout68]

Relatively easy i thought.... moved it around three inches to the left to center up the steering coulum, and had to add 6" to the passenger side

[hotrodrick]

alot of work, but maybe one of the coolest mods i've ever done. people at shows really seem to like it, even non truck people notice how cool it is .
i cut mine in middle and widen it about 4.5 inches built new slot for
new style radio and also used oem style hvac controller

[gcburdic]

Originally Posted by hotrodrick

alot of work, but maybe one of the coolest mods i've ever done. people at shows really seem to like it, even non truck people notice how cool it is .
i cut mine in middle and widen it about 4.5 inches built new slot for
new style radio and also used oem style hvac controller

I saw this one at GG Charlotte this year and yours is the most recent one I have seen and thought about for this thread....nice work, and as you said "it was ALOT of work" when I asked

[layedout68]

Thats so clean... I thought about extending the middle but looked for a easy way out by extending the pasenger side with extra door skin metal i had around the shop. What chevrolet embelem is that on the dash??

[hotrodrick]

can't remember which one but it was a 55 56 or 57 emblem. i bought
from danchuck at a show.

[N2TRUX]

Originally Posted by hotrodrick

alot of work, but maybe one of the coolest mods i've ever done. people at shows really seem to like it, even non truck people notice how cool it is .
i cut mine in middle and widen it about 4.5 inches built new slot for
new style radio and also used oem style hvac controller

That interior is beautiful. Please post more pics inside and out.

[CG]

Originally Posted by hotrodrick

alot of work, but maybe one of the coolest mods i've ever done. people at shows really seem to like it, even non truck people notice how cool it is .
i cut mine in middle and widen it about 4.5 inches built new slot for
new style radio and also used oem style hvac controller

Very nicely done!

[wild4wheels]

May have been mentioned before but here are my pics from Goodguys Des Moines last year. Guy was from MO, super nice. The truck as it appeared then...

[hotrodrick]

layedout68,
all trim i hand formed from 6061 aluminum drilled and taped with # 4-40
studs and nuts to install. dash trim and top of door panel was 1/4 X 1/2
and the door panel trim was 1/4 x 1/4 . start sanding with a d.a. sander with
240 grit paper follow sanding with 400 dry 600 wet 800 wet 1000 wet
1500 wet then 2000 wet then you can hand rub mothers billet polish with
microfiber to mirror finish or you can use a buffer. i have found this system works better by hand on smaller or bent pieces as the buffer will try to rip the piece from your hand regardless the speed or location on buffing wheel
good luck

[layedout68]

Been super busy tryn to get mine ready for paint,,,,these curves are so time consuming

[19Hoosierdaddies68]

Originally Posted by hotrodrick

alot of work, but maybe one of the coolest mods i've ever done. people at shows really seem to like it, even non truck people notice how cool it is .
i cut mine in middle and widen it about 4.5 inches built new slot for
new style radio and also used oem style hvac controller

What seats are in there?