VT Rust free blazer tub and doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rochlow · 10-25-2011, 11:26 AM

ok.. Last ditch effort to sell the tub. I have found something else I want.

-Rust free 69 blazer tub with title painted Kolor Shoppe's flat black (I cut a 8x10 section of the floor out under the rear seat. I still have the section I cut out and can be easily welded back in. Also, I raised that 8x10 section of the floor to allow the rear diff room)
After market doors tri-plus with new door gaskets
Also, comes with a brand new softtopper soft top, front and rear carpet strips, brand new windshield and gasket, new body bushing/hardware, and blazer sunvisors.

$7500 for all the above or $6000 just for the tub. I know that it's quite alot. However, after being on the boards for a couple of years and researching. You will be hard pressed to find another body that is in this nice of shape. It is basically a bolt on and go.

If the tub and doors sell I will have a set (front and back) houndstooth seats to sell that were just upholestered this June

I am negotiable on the price or extra parts I have. However, be reasonable.

There are pictures on my build thread and can get more on request.

Before primer and paint

**Gary 70 Jimmy** · 10-25-2011, 11:38 AM

I would be interested in the rear carpet hold downs.

Rochlow · 10-25-2011, 12:23 PM

Quote:

Originally Posted by Gary 70 Jimmy

I would be interested in the rear carpet hold downs.

I'm going to keep those with the tub. Unless someone makes me an offer on just the tub. If they do then I will sell off the smaller parts.

Rochlow · 10-26-2011, 08:57 AM

after body and paint work.

Rochlow · 10-27-2011, 02:51 PM

Wow.. Nobody.. Not even a question??

I have over $6500 in the tub alone.

Rochlow · 10-29-2011, 08:02 PM

$5500 for the tub and frame???

**thelonerife** · 10-29-2011, 09:55 PM

Quote:

Originally Posted by Rochlow

Wow.. Nobody.. Not even a question??

I have over $6500 in the tub alone.

Maybe if you told more about your frame and posted a link to your build. Just trying to help. It looks nice!

Rochlow · 10-29-2011, 10:13 PM

Sure, I can do that..

Here is the build thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=372757

It's a 4wd frame that was converted to 2wd using a 84 crossmember.

I can take pictures of anything. Also, can give you access to my photobucket account upon request.

wholio · 10-31-2011, 09:31 PM

im moving to florida right now maybe when i settle in if you still have it ill hit u up, nice work btw

Rochlow · 10-31-2011, 09:58 PM

Sounds good to me and thanks
Posted via Mobile Device

Rochlow · 11-06-2011, 05:06 PM

ttt
Posted via Mobile Device

jeffg1010 · 11-07-2011, 10:16 PM

If you do part it all the way, I would be interested in the seats. I do work with a company out of Boston... I am up there every so often, so I may be able to get them down here. In fact, I would be interested in prices on most of the small parts and interior parts. PM me!

Rochlow · 11-07-2011, 11:19 PM

Quote:

Originally Posted by jeffg1010

If you do part it all the way, I would be interested in the seats. I do work with a company out of Boston... I am up there every so often, so I may be able to get them down here. In fact, I would be interested in prices on most of the small parts and interior parts. PM me!

Pm sent

Rochlow · 11-26-2011, 03:04 PM

Ttt..
Posted via Mobile Device

Rochlow · 11-27-2011, 04:50 PM

Might be interested in trading the body for a 67-68 truck, (short bed fleetside, small window) with patina like N2billets truck.

Liddy71 · 12-05-2011, 06:06 PM

nice what comes with the frame or can it be bought whole

Rochlow · 12-06-2011, 09:49 AM

Quote:

Originally Posted by Liddy71

nice what comes with the frame or can it be bought whole

The frame is 4wd converted to a 2wd. It has a C-notch welded in the rear. The frame would come with engine crossmember, Trans crossmember, and front cross member (under the radiator)

Rochlow · 12-07-2011, 05:35 PM

Sold!
Posted via Mobile Device

10-25-2011, 11:26 AM	#1
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Rust free blazer tub and doors ok.. Last ditch effort to sell the tub. I have found something else I want. -Rust free 69 blazer tub with title painted Kolor Shoppe's flat black (I cut a 8x10 section of the floor out under the rear seat. I still have the section I cut out and can be easily welded back in. Also, I raised that 8x10 section of the floor to allow the rear diff room) After market doors tri-plus with new door gaskets Also, comes with a brand new softtopper soft top, front and rear carpet strips, brand new windshield and gasket, new body bushing/hardware, and blazer sunvisors. $7500 for all the above or $6000 just for the tub. I know that it's quite alot. However, after being on the boards for a couple of years and researching. You will be hard pressed to find another body that is in this nice of shape. It is basically a bolt on and go. If the tub and doors sell I will have a set (front and back) houndstooth seats to sell that were just upholestered this June I am negotiable on the price or extra parts I have. However, be reasonable. There are pictures on my build thread and can get more on request. Before primer and paint Last edited by Rochlow; 10-25-2011 at 04:42 PM.

10-25-2011, 11:38 AM	#2
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Rust free blazer tub and doors I would be interested in the rear carpet hold downs. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-26-2011, 08:57 AM	#4
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors after body and paint work.

10-27-2011, 02:51 PM	#5
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Wow.. Nobody.. Not even a question?? I have over $6500 in the tub alone. Last edited by Rochlow; 10-27-2011 at 02:56 PM.

10-29-2011, 08:02 PM	#6
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors $5500 for the tub and frame??? Last edited by Rochlow; 10-29-2011 at 09:26 PM.

10-29-2011, 10:13 PM	#8
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Sure, I can do that.. Here is the build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=372757 It's a 4wd frame that was converted to 2wd using a 84 crossmember. I can take pictures of anything. Also, can give you access to my photobucket account upon request.

10-31-2011, 09:31 PM	#9
wholio Registered User Join Date: Oct 2009 Location: fort myers Posts: 320	Re: Rust free blazer tub and doors im moving to florida right now maybe when i settle in if you still have it ill hit u up, nice work btw __________________ it aint custom unless you CUT IT!! My Restoration Begins on a 1969 k5

10-31-2011, 09:58 PM	#10
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Sounds good to me and thanks Posted via Mobile Device

11-06-2011, 05:06 PM	#11
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors ttt Posted via Mobile Device

11-07-2011, 10:16 PM	#12
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: Rust free blazer tub and doors If you do part it all the way, I would be interested in the seats. I do work with a company out of Boston... I am up there every so often, so I may be able to get them down here. In fact, I would be interested in prices on most of the small parts and interior parts. PM me! __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

11-26-2011, 03:04 PM	#14
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Ttt.. Posted via Mobile Device

11-27-2011, 04:50 PM	#15
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Might be interested in trading the body for a 67-68 truck, (short bed fleetside, small window) with patina like N2billets truck.

12-05-2011, 06:06 PM	#16
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Rust free blazer tub and doors nice what comes with the frame or can it be bought whole

12-07-2011, 05:35 PM	#18
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Rust free blazer tub and doors Sold! Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.