GA parting 1969 gmc longhorn - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chris Bultman · 08-08-2011, 05:17 PM

How much for the linkage to hook the brake pedal to the booster? If the pedal is different from manual brakes I need that too.

Thanks, Chris

**southern parts** · 08-08-2011, 07:18 PM

tow guys- sorry, $225 is the best i can do .

missinfishin10- $40

Steve Hafner- $50 shipped on the aux batt wiring

Rdrdave- $53 shipped on the door panels

Chris Bultman- the pedal is the same for power & manual brake. $35 plus shipping on the booster brackets

Steve Hafner · 08-08-2011, 07:34 PM

I'll take the Aux battery wiring, if it's all there and in good condition.
Personal Message sent

6.0 1955 · 08-08-2011, 08:23 PM

How much for a passenger side hood hinge shipped to 41101? Thanks

stahl24 · 08-08-2011, 08:27 PM

does this truck have rear leaf hangers

Chris Bultman · 08-08-2011, 08:57 PM

Thanks for the quick reply. I have brackets and booster that I think are from a 67-72 truck. There is some linkage that is between the brackets and it looks like I need a hiem joint on the end of the pedal rod.

Chris

tow guys · 08-08-2011, 10:19 PM

Give me a day or 2 and I will let ya know about then passenger fender. Thanks for taking the time to post the pics
Posted via Mobile Device

Rdrdave · 08-09-2011, 11:24 AM

I'll take the door panels. PM sent.

Quote:

Originally Posted by southern parts

tow guys- sorry, $225 is the best i can do .

missinfishin10- $40

Steve Hafner- $50 shipped on the aux batt wiring

Rdrdave- $53 shipped on the door panels

Chris Bultman- the pedal is the same for power & manual brake. $35 plus shipping on the booster brackets

longhorn70gmc · 08-09-2011, 12:03 PM

Thanks for checking on the emblems for me. I already have a set each of the ones you have. Good luck on the sales.
R/

**southern parts** · 08-10-2011, 09:26 PM

steve hafner- the aux batt/ camper wiring is cut behind the cab.

6.0 1955- $30 for 1 or $45 for both shipped

stahl24- yes it does $50 plus shipping

chris bultman- post a pic of what you have

tow guys - i looked at the fender again and was able to poke 4 or 5 holes in the front cup area with my pocket knife

rdrdave- the door panels will be put into the mail tomorrow

tow guys · 08-10-2011, 10:23 PM

Thanks for the update. I'm gonna pass at this time. I'm looking for a ready to bolt on fender if possible.

**ScottH** · 08-10-2011, 10:48 PM

interested in carb and air cleaner if its a 2 barrel in working condition.

any info is appreciated.

Thanks

Steve Hafner · 08-11-2011, 04:48 AM

Quote:

Originally Posted by southern parts

steve hafner- the aux batt/ camper wiring is cut behind the cab.

6.0 1955- $30 for 1 or $45 for both shipped

stahl24- yes it does $50 plus shipping

chris bultman- post a pic of what you have

tow guys - i looked at the fender again and was able to poke 4 or 5 holes in the front cup area with my pocket knife

rdrdave- the door panels will be put into the mail tomorrow

Thanks, anyway !!!

**JQ-72** · 08-19-2011, 06:35 PM

How about the bed? Condition and price. Thanks.

Joshua

**southern parts** · 08-20-2011, 09:05 PM

hey Joshua, i`ll look the bed over and try to get some better pics of the bed tomorrow.

TrkEnvy · 08-21-2011, 02:30 AM

I really need a passenger window with the lower metal frame. Do you still have this and what can you do on price? THX
Brock

**southern parts** · 08-21-2011, 05:17 PM

JQ-72 - $250 on the bed. drivers side is straight but the inner lip has some rusty spots. pass side has a few dents, rust on the inner lip and behind the wheel, the top rail was cut and welded back (not straight). header panel is good, bowed a little on the bottom. the rear piece that goes across the back is good. no gate. send your email and i`ll get more pics if your interested

TrkEnvy- do you need a tinted or clear window? $25 plus shipping.

**JQ-72** · 08-21-2011, 06:26 PM

Thanks Woody, but I'll pass. I've got a decent bed that needs a little TLC - just looking for a nicer one if it's out there!
Joshua

**southern parts** · 09-02-2011, 09:04 PM

ttt

TripleNickel · 12-09-2011, 12:27 PM

This thread has been inactive for a while.

If the seat belts are still available, what is your best price delivered to 44305?

Would you consider shipping the bedsides? If so, let's get a price on those as well.

Thanks!

72GMCK-2500 · 12-09-2011, 04:00 PM

Can i get pics of the GMC fender emblems, Interested.....

rico7769 · 12-09-2011, 11:46 PM

Love to see better pics of the seat if its still for sale

**southern parts** · 12-10-2011, 06:58 AM

sorry ,no longer bring parted.

08-08-2011, 05:17 PM	#26
Chris Bultman Registered User Join Date: May 2011 Location: Dorr Mi Posts: 8	Re: parting 1969 gmc longhorn How much for the linkage to hook the brake pedal to the booster? If the pedal is different from manual brakes I need that too. Thanks, Chris

08-08-2011, 07:18 PM	#27
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn tow guys- sorry, $225 is the best i can do . missinfishin10- $40 Steve Hafner- $50 shipped on the aux batt wiring Rdrdave- $53 shipped on the door panels Chris Bultman- the pedal is the same for power & manual brake. $35 plus shipping on the booster brackets

08-08-2011, 07:34 PM	#28
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: parting 1969 gmc longhorn I'll take the Aux battery wiring, if it's all there and in good condition. Personal Message sent __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526 Last edited by Steve Hafner; 08-09-2011 at 12:09 PM.

08-08-2011, 08:23 PM	#29
6.0 1955 Registered User Join Date: Jul 2011 Location: Ashland, KY Posts: 91	Re: parting 1969 gmc longhorn How much for a passenger side hood hinge shipped to 41101? Thanks

08-08-2011, 08:27 PM	#30
stahl24 Registered User Join Date: Aug 2011 Location: connellsville pa Posts: 1	Re: parting 1969 gmc longhorn does this truck have rear leaf hangers

08-08-2011, 08:57 PM	#31
Chris Bultman Registered User Join Date: May 2011 Location: Dorr Mi Posts: 8	Re: parting 1969 gmc longhorn Thanks for the quick reply. I have brackets and booster that I think are from a 67-72 truck. There is some linkage that is between the brackets and it looks like I need a hiem joint on the end of the pedal rod. Chris

08-08-2011, 10:19 PM	#32
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: parting 1969 gmc longhorn Give me a day or 2 and I will let ya know about then passenger fender. Thanks for taking the time to post the pics Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

08-09-2011, 12:03 PM	#34
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: parting 1969 gmc longhorn Thanks for checking on the emblems for me. I already have a set each of the ones you have. Good luck on the sales. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

08-10-2011, 09:26 PM	#35
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn steve hafner- the aux batt/ camper wiring is cut behind the cab. 6.0 1955- $30 for 1 or $45 for both shipped stahl24- yes it does $50 plus shipping chris bultman- post a pic of what you have tow guys - i looked at the fender again and was able to poke 4 or 5 holes in the front cup area with my pocket knife rdrdave- the door panels will be put into the mail tomorrow

08-10-2011, 10:23 PM	#36
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: parting 1969 gmc longhorn Thanks for the update. I'm gonna pass at this time. I'm looking for a ready to bolt on fender if possible. __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

08-10-2011, 10:48 PM	#37
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: parting 1969 gmc longhorn interested in carb and air cleaner if its a 2 barrel in working condition. any info is appreciated. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-19-2011, 06:35 PM	#39
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: parting 1969 gmc longhorn How about the bed? Condition and price. Thanks. Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

08-20-2011, 09:05 PM	#40
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn hey Joshua, i`ll look the bed over and try to get some better pics of the bed tomorrow.

08-21-2011, 02:30 AM	#41
TrkEnvy Registered User Join Date: Apr 2011 Location: Las Vegas, NV Posts: 264	Re: parting 1969 gmc longhorn I really need a passenger window with the lower metal frame. Do you still have this and what can you do on price? THX Brock

08-21-2011, 05:17 PM	#42
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn JQ-72 - $250 on the bed. drivers side is straight but the inner lip has some rusty spots. pass side has a few dents, rust on the inner lip and behind the wheel, the top rail was cut and welded back (not straight). header panel is good, bowed a little on the bottom. the rear piece that goes across the back is good. no gate. send your email and i`ll get more pics if your interested TrkEnvy- do you need a tinted or clear window? $25 plus shipping. Attached Images



Register or Log In To remove these advertisements.

08-21-2011, 06:26 PM	#43
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: parting 1969 gmc longhorn Thanks Woody, but I'll pass. I've got a decent bed that needs a little TLC - just looking for a nicer one if it's out there! Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

09-02-2011, 09:04 PM	#44
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn ttt

12-09-2011, 12:27 PM	#45
TripleNickel Registered User Join Date: May 2010 Location: Akron, Ohio Posts: 154	Re: parting 1969 gmc longhorn This thread has been inactive for a while. If the seat belts are still available, what is your best price delivered to 44305? Would you consider shipping the bedsides? If so, let's get a price on those as well. Thanks!

12-09-2011, 04:00 PM	#46
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: parting 1969 gmc longhorn Can i get pics of the GMC fender emblems, Interested..... __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

12-09-2011, 11:46 PM	#47
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: parting 1969 gmc longhorn Love to see better pics of the seat if its still for sale __________________ Keep em' Running! All show.....no go

12-10-2011, 06:58 AM	#48
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1969 gmc longhorn sorry ,no longer bring parted.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.