NC PS pump bracket SBC

[71meangreenc10]

Older alan grove SBC PS pump bracket, came off my 71 C10, works good, $35 shipped, will take paypal or MO, wont ship until MO clears.

Smitty

[71meangreenc10]

TTT

Smitty

[J.Cagle]

Im putting an '84 350 in my truck and the motor origionaly had ac. so the ac bracket and PS brackets are one. I got rid of the ac and would like a bracket for just the PS pump. Would this fit my motor you think?

[71meangreenc10]

Are you setting it up like the original configuration with the pump on the lower driver side? If so this will work. You have to get all the pulleys and water pump for the 64 set up, ie short water pump.

Smitty

[J.Cagle]

The motor had the pump on the drivers lower side originally and i plan to keeo it there.......

[71meangreenc10]

There are two spots that the pump was mounted, the middle of the engine on the drivers side, if you had the alt on the passenger side, and low by the crank pulley if the alt was on the drivers side along with the pump. I have everything to put the drive belts on along with a correct alt mount for the drivers side head. I have the pulleys in another add. i can cut you a deal if you want for the bracket, pulleys and the alt mount and all you would need is the short water pump, ps pump and alt to make it work and of coarse the balancer.

Update: Pulleys may be gone.

let me know.

Smitty

[J.Cagle]

Well my alt is up top on the passenger side. Ill compare my motor to the pics of your bracket when i go to the shop tonight to see if itll work or not.

[71meangreenc10]

TTT

Smitty

[71meangreenc10]

TTT

Smitty

[71meangreenc10]

TTT


Smitty

[71meangreenc10]

TTT

Smitty

[71meangreenc10]

TTT

Smitty

[71meangreenc10]

Bump....

Smitty

[71meangreenc10]

Sold.....


Smitty