IN Misc Frame Parts $10-$20-$40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 12-19-2011, 09:16 PM

This truck is hitting scrap this week... Just trying to supply anything people might need for cheap... LWB frame and steel bed...
ALL THESE PARTS ARE STRAIGHT....SOLID AND RUST FREE!!! Can powder coat for minimal charge as well!!!
LQQK AT LAST PAGE FOR UPDATED PICS...NICE PASS BEDSIDE FOR ANY PANELS NEEDED AND WHOLE CENTER SECTION OF BED FLOOR
Both front cross sills completely solid, 1 rear sill, 1 infamous longer front reinforcement strip which bolts to wheel housings - $20/pc. $30/pc. blasted
2 for $30 or all 4 pieces for $60 (not blasted)

Bed supports/stands $30 for all four $20 for flat ones ALL BLASTED!!!

Rear track arm with ALL hardware(including stud kit) and BLASTED $40

Cross members $20 bucks excluding trans cross....trans cross $30

HeavyMetalChevy · 12-19-2011, 09:19 PM

more

HeavyMetalChevy · 12-19-2011, 09:28 PM

again

HeavyMetalChevy · 12-19-2011, 09:31 PM

last one swear!! lol

track bar with mounting bracket and other side of long reinforcement sill

HeavyMetalChevy · 12-19-2011, 11:02 PM

ANYTHING else frame related just ask Only spoken for is the spring cups...rear shock mount brackets, and the pass side frame rail section that includes the riveted mount for coil. Also the front curved front crossmember.

Everything in this diagram is in good usable shape and available. just ask please

HeavyMetalChevy · 12-20-2011, 12:43 AM

few more pics and perspectives...

buddylee · 12-20-2011, 07:19 AM

page #3
the best crossmember plus shipping to 02889

dadsworktruck · 12-20-2011, 06:38 PM

Quote:

Originally Posted by HeavyMetalChevy

how much for these 3 shipped to 29702 ,thanks

HeavyMetalChevy · 12-20-2011, 07:01 PM

Quote:

Originally Posted by dadsworktruck

how much for these 3 shipped to 29702 ,thanks

I will have these off tonight and have weight for ship quote later this evening or by tomorrow am for you buddy... thanks... I will clean them up for you too!

HeavyMetalChevy · 12-21-2011, 08:10 PM

Quote:

Originally Posted by dadsworktruck

how much for these 3 shipped to 29702 ,thanks

$75 shipped buddy.... You don't need the bigger rear cross just the smaller one and two middle??? Just checking... I wanted $20 a piece for each one which would be $60 and it is $17.07 USPS Parcel post to BLACKSBURG, SC 29702 . So just call it even $75... I will just throw the four in just in case you need the bigger rear one...

HeavyMetalChevy · 12-21-2011, 08:13 PM

for dadsworktruck.... you need just the three in red or also the one in blue??? just checking to clarify... thanks

dadsworktruck · 12-21-2011, 08:20 PM

yes and a couple other smaller items too, pm sent

REEDS 72 · 12-21-2011, 08:38 PM

Hi are the rear wheel tubs any good and if so are you selling them?

HeavyMetalChevy · 12-21-2011, 09:35 PM

Quote:

Originally Posted by REEDS 72

Hi are the rear wheel tubs any good and if so are you selling them?

pics for reeds... Yes they are very good shape!!! one is perfect and the other has dimple and very minimal rust through on pass. front bolt flange... I will blast and call it 75 for pair... They will be like brand new... The one perfect one I KNOW is worth $50 esp blasted! here are pics

dadsworktruck · 12-21-2011, 09:40 PM

Heavy...

Here is the pic of what I am looking for.

As for the shock mounts I have a WTB thread on those. But if you have them let me know so I can inform the other guys on that post.

Thanks,

Don

*ps* sorry for the gigantic photo.

HeavyMetalChevy · 12-21-2011, 09:43 PM

Quote:

Originally Posted by dadsworktruck

Heavy...

Here is the pic of what I am looking for.

As for the shock mounts I have a WTB thread on those. But if you have them let me know so I can inform the other guys on that post.

Thanks,

Don

*ps* sorry for the gigantic photo.

DUDE!!!!!! if I could get everyone to do this for me I would be in heaven... Whoever made the diagram reminds me of when I was doing C.A.D. design... "SKILLS"!!!! I have all that... Can have it all tomorrow ready... I have

dadsworktruck · 12-21-2011, 09:49 PM

cool, my son says thanks , he did the last posting....let me know price shipped to 29702

HeavyMetalChevy · 12-21-2011, 09:49 PM

Don...130 shipped??? The labor is what does it with grinding all those rivets...fig.. $100 for all the parts... mostly labor cutting grinding and torching rivets and $30 bucks ship... I am getting pretty darn accurate on estimates but if it ends up being cheaper on ship and/or weight I will be sure to adjust accordingly...

dadsworktruck · 12-21-2011, 09:56 PM

i understand the labor aspect of it!!!! sounds like a plan....i will take them, send me your payment info...thanks......don and jason

HeavyMetalChevy · 12-21-2011, 10:10 PM

Quote:

Originally Posted by dadsworktruck

i understand the labor aspect of it!!!! sounds like a plan....i will take them, send me your payment info...thanks......don and jason

Yeah its a great deal at 20 bucks a x-member... I don't think there is an aftermarket company that makes them... P.P. is remimartin257@aol.com... thanks man! Really appreciated! I hate scrapping these frames because all the ones I have are solid and good base for future projects. Also I know someone just like yourself will need these oddball parts for repairs... But I have 4 frames and 6 rear ends lying around at the moment and that's just too much clutter... lol happy Holidays don and jason

HeavyMetalChevy · 12-21-2011, 10:26 PM

Quote:

Originally Posted by buddylee

page #3
the best crossmember plus shipping to 02889

cheapest rate $16.94 USPS Parcel so call it $37 total... $47 if you want it blasted...

dadsworktruck · 12-21-2011, 10:28 PM

pay pal sent.....thanks

HeavyMetalChevy · 12-21-2011, 10:31 PM

Quote:

Originally Posted by dadsworktruck

pay pal sent.....thanks

received sir... great guy to work with...your son sure made it a lot easier on both of us too!

REEDS 72 · 12-22-2011, 08:15 PM

Hi were they bolt to the bed side do you know if there is rust holes Iam in no hurry and I dont think you have them all the way out yet, from what I can see but I am in need of 2 good driver qualty ones just trying to get the best ones I can thanks much for your time and all check back. shipping will be 84003 if you know how much that will be.

Gobbles · 12-22-2011, 08:36 PM

Hey im pretty sure these are gone but i figured I would ask anyway, Im looking for a pair of these:

12-19-2011, 09:16 PM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Misc Frame Parts $10-$20-$40 This truck is hitting scrap this week... Just trying to supply anything people might need for cheap... LWB frame and steel bed... ALL THESE PARTS ARE STRAIGHT....SOLID AND RUST FREE!!! Can powder coat for minimal charge as well!!! LQQK AT LAST PAGE FOR UPDATED PICS...NICE PASS BEDSIDE FOR ANY PANELS NEEDED AND WHOLE CENTER SECTION OF BED FLOOR Both front cross sills completely solid, 1 rear sill, 1 infamous longer front reinforcement strip which bolts to wheel housings - $20/pc. $30/pc. blasted 2 for $30 or all 4 pieces for $60 (not blasted) Bed supports/stands $30 for all four $20 for flat ones ALL BLASTED!!! Rear track arm with ALL hardware(including stud kit) and BLASTED $40 Cross members $20 bucks excluding trans cross....trans cross $30 Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 12-28-2011 at 04:48 PM.

12-19-2011, 09:19 PM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-19-2011, 09:31 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 last one swear!! lol track bar with mounting bracket and other side of long reinforcement sill Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-19-2011, 11:02 PM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 ANYTHING else frame related just ask Only spoken for is the spring cups...rear shock mount brackets, and the pass side frame rail section that includes the riveted mount for coil. Also the front curved front crossmember. Everything in this diagram is in good usable shape and available. just ask please Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-20-2011, 12:43 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 few more pics and perspectives... Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-19-2011, 09:28 PM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 again Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-20-2011, 07:19 AM	#7
buddylee Registered User Join Date: Jan 2010 Location: Coventry,RI Posts: 114	Re: Misc Frame Parts $10-$20-$40 page #3 the best crossmember plus shipping to 02889

12-21-2011, 08:13 PM	#11
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 for dadsworktruck.... you need just the three in red or also the one in blue??? just checking to clarify... thanks Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-21-2011, 08:20 PM	#12
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 yes and a couple other smaller items too, pm sent

12-21-2011, 08:38 PM	#13
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Misc Frame Parts $10-$20-$40 Hi are the rear wheel tubs any good and if so are you selling them?

12-21-2011, 09:40 PM	#15
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 Heavy... Here is the pic of what I am looking for. As for the shock mounts I have a WTB thread on those. But if you have them let me know so I can inform the other guys on that post. Thanks, Don ps sorry for the gigantic photo.

12-21-2011, 09:49 PM	#17
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 cool, my son says thanks , he did the last posting....let me know price shipped to 29702

12-21-2011, 09:49 PM	#18
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Misc Frame Parts $10-$20-$40 Don...130 shipped??? The labor is what does it with grinding all those rivets...fig.. $100 for all the parts... mostly labor cutting grinding and torching rivets and $30 bucks ship... I am getting pretty darn accurate on estimates but if it ends up being cheaper on ship and/or weight I will be sure to adjust accordingly... __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

12-21-2011, 09:56 PM	#19
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 i understand the labor aspect of it!!!! sounds like a plan....i will take them, send me your payment info...thanks......don and jason

12-21-2011, 10:28 PM	#22
dadsworktruck Registered User Join Date: Jul 2009 Location: blacksburg,s.c. Posts: 155	Re: Misc Frame Parts $10-$20-$40 pay pal sent.....thanks



Register or Log In To remove these advertisements.

12-22-2011, 08:15 PM	#24
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Misc Frame Parts $10-$20-$40 Hi were they bolt to the bed side do you know if there is rust holes Iam in no hurry and I dont think you have them all the way out yet, from what I can see but I am in need of 2 good driver qualty ones just trying to get the best ones I can thanks much for your time and all check back. shipping will be 84003 if you know how much that will be.

12-22-2011, 08:36 PM	#25
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Misc Frame Parts $10-$20-$40 Hey im pretty sure these are gone but i figured I would ask anyway, Im looking for a pair of these: Attached Images __________________ Trevor "You already said spite"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.