gaskets for tranfercase???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue4x4 · 08-28-2003, 08:36 PM

Does anyony know if a gasket / RTV is required on this transfer case? On the 8 pointed cover that is missing. it was leaking fluid and after taking it apart I found no seal/sealant.

JimKshortstep4x4 · 08-28-2003, 08:45 PM

We have used RTV on the plate and it works very well. You want to be careful not to have excess RTV get inside.

Jim

Class of 69 · 08-28-2003, 08:52 PM

Were there shims under the cover too?? My T 221 leaked bad, and I eliminated the shims, and it still fit tight to the case, so I used RTV sparingly and no more leak.

71 fun · 08-28-2003, 11:28 PM

You should have no problem with RTV but keep in mind many of the bolts in your trans case go through to oil and must be sealed. I have seen people change seals when the problem is the leaking bolts.

Blue4x4 · 08-29-2003, 06:33 PM

I found no shims under this cover. Thanks for all the help.

08-28-2003, 08:36 PM	#1
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	gaskets for tranfercase???? Does anyony know if a gasket / RTV is required on this transfer case? On the 8 pointed cover that is missing. it was leaking fluid and after taking it apart I found no seal/sealant. Attached Images

08-28-2003, 08:52 PM	#3
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	Were there shims under the cover too?? My T 221 leaked bad, and I eliminated the shims, and it still fit tight to the case, so I used RTV sparingly and no more leak. __________________ 69 GMC K10 ..some restoration required....still..

08-28-2003, 11:28 PM	#4
71 fun Registered User Join Date: Jul 2003 Location: Elko,Nv. Posts: 65	RTV You should have no problem with RTV but keep in mind many of the bolts in your trans case go through to oil and must be sealed. I have seen people change seals when the problem is the leaking bolts. __________________ 71 k/20 GMC 79 k/10 GMC 96 k/10 GMC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-28-2003, 08:45 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	We have used RTV on the plate and it works very well. You want to be careful not to have excess RTV get inside. Jim

08-29-2003, 06:33 PM	#5
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	I found no shims under this cover. Thanks for all the help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.