NC Parting a complete 1971 Blazer 4x4

[jeffg1010]

[quote=jaros44sr;5122484]

Originally Posted by jeffg1010

I had someone wanting the seats mounting brackets, but the seat itself hasnt had any takers. In fact, the guy on the bracket hasn't replied either. Would you want to pick up or have it shipped. Philly is about 6 hours from Beckley.

How much for the seat, and what does the mount look like on the passenger side? Do you live near a greyhound bus terminal

How about the reinforcement plates on the back of the doors

I just messaged the guy who had dibs on the brackets to see if he still wants them. Would you want JUST the seat minus brackets if he wants the brackets?

There is a greyhound station in Beckley (i think it's still there). The seat that is in good shape is the passenger seat. I'd like to get $50 for it -minus the bracket, ($75 with the bracket), but I have no idea what the shipping would be. I am sure it would be quite a bit cheaper minus the bracket.

Where are the reinforcement plates on the back of the door? Are they in the door or the door jamb? I am sure they are still there.

[jaros44sr]

[quote=jeffg1010;5122552]

Originally Posted by jaros44sr

I just messaged the guy who had dibs on the brackets to see if he still wants them. Would you want JUST the seat minus brackets if he wants the brackets?

There is a greyhound station in Beckley (i think it's still there). The seat that is in good shape is the passenger seat. I'd like to get $50 for it -minus the bracket, ($75 with the bracket), but I have no idea what the shipping would be. I am sure it would be quite a bit cheaper minus the bracket.

Where are the reinforcement plates on the back of the door? Are they in the door or the door jamb? I am sure they are still there.

Jeff, i would interested in just the seat. If you cut the hog rings on the bottom side flap vynil, you will have access to the mounting screws toremove the back. You can now ship it in two pieces. Soak the scews with PB Powerblaster for a couple days, if you cant get them out, just drill the phillips head, and ill deal with them

The reinforcement plate is located at the back of the door, by the closer. Dont drill the spot welds, just cut it larger with a sawsall. About a 1/2 " Larger on all sides

[DeadheadNM]

Some Blazers had under dash lights mounted on each side near the pulls for the kick panel vents. These would illuminate when the doors opened. Should be easy to locate if these are there....

[lynnfield]

I know it's a long shot, but I'd like to get in line for the gas tank.......been looking for one for a while. Thanks, Greg

[OL SKOOL]

if gas pedal assembly still available does it come with the cable? if it does i will take it pm me for payment instructions and total 60129 zip. i will send postal money order i don't have paypal thank you.

[tanman722001]

Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony

[jeffg1010]

Originally Posted by OL SKOOL

if gas pedal assembly still available does it come with the cable? if it does i will take it pm me for payment instructions and total 60129 zip. i will send postal money order i don't have paypal thank you.

I am pretty certain my dad said he cut the cable. Are you still interested in the assembly?

Originally Posted by tanman722001

Do you still have the door panels,Arm rest.Sun visors,Radiator?Got and pics of any I listed?Thanks Tony

The arm rests and radiator are still available. Sun visors and door panels are sold.

[OL SKOOL]

I'm just going to wait till i can get it all with the cable.Long way to go before i need a gas pedal.Thanx for your time .

[va72longhorn]

Jeff, I'll have to apologize early if I over looked it, but do you still have the fuel filler neck shroud? If so, how what would be the shipped price to 22701?

[jeffg1010]

haha, ironic. I just pulled it out of the parts bin last night to hang on to it. I noticed mine doesn't have one. I am considering fab'ing a set of interior side panels, so I may not need it. I'll let you know.
Jeff

[va72longhorn]

Thanks, jeff, let me know. I have a Longhorn with a aux tank, but i think it'll work.

[tanman722001]

What are you asking for them?Do you have any pics of them?

[jeffg1010]

Originally Posted by tanman722001

What are you asking for them?Do you have any pics of them?

Are you gonna pick them up? If so, then how about $50.00 for the radiator and the armrests.

Armrests are in real good shape.

pics...









Radiator
The dark marks on the top is where some anti freeze spilled out when I pulled it out of the trailer. I don't think it's leaking because it was full when we pulled it out.

[blazin71K5]

Jeff,
Payment was sent for the seat brackets.
Thanks again
Matt

[205harleyman]

Can Tou send me some pictures of top of windshield post where the top sits and points above vent windows?

[72blazer_mud_bogger]

when did you ship the handles and knob or when should I start lookin for the package?

[richard2717]

Jeff I will get in line for the black arm rests pending price with shipping to 21801

Thanks
Richard

[jeffg1010]

Originally Posted by 72blazer_mud_bogger

when did you ship the handles and knob or when should I start lookin for the package?

I picked the handles up on Tuesday, but I just got a box big enough to fit the shifter today. They should go out tomorrow. Thanks!

Originally Posted by 205harleyman

Can Tou send me some pictures of top of windshield post where the top sits and points above vent windows?

It may take me a week or so to get them. The windshield frame is still in WV. Did you look through the 140+ photos in the photobucket link on page 1. There is some photos of that area, but nothing specifically targeting the point above the vent window.

Originally Posted by richard2717

Jeff I will get in line for the black arm rests pending price with shipping to 21801

Thanks
Richard

I've got you on the list.

Originally Posted by tanman722001

What are you asking for them?Do you have any pics of them?

Did you get my phone #?

[72blazer_mud_bogger]

You know I only need the knob on the Tcase shifter and not the entire shifter right?

[jeffg1010]

Originally Posted by 72blazer_mud_bogger

You know I only need the knob on the Tcase shifter and not the entire shifter right?

HAHA! No That should be MUCH easier.

[DeadheadNM]

Just following-up on the under dash lights. Still there? Thanks, Pete

[72blazer_mud_bogger]

glad we got that straight lol, look forward to getting your package so I can open the doors without my vice grips

[jeffg1010]

Originally Posted by 72blazer_mud_bogger

glad we got that straight lol, look forward to getting your package so I can open the doors without my vice grips

Well, they should be there by Monday or so... Enjoy! I can't find one of the pins, but I told my dad to look for it, and when he finds it, I will throw it in an envelope and send it your way.

Originally Posted by DeadheadNM

Just following-up on the under dash lights. Still there? Thanks, Pete

I haven't been back up to WV since I got your post, but I will get in touch with you as soon as I check. Thanks

[72blazer_mud_bogger]

sounds good I wont be driving it till I get the roll cage and wiring harness finished just one more thing to check off the list till she is back on the road.

[lynnfield]

Just checking in, if I get a shot at the tank I would like the straps as well if still available. THanks, Greg