4x4 engine stands - frame mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcmlxix · 12-27-2011, 02:06 AM

I was looking for some pics and measurements for the mounts that bolt to the frame on 4x4 trucks. If anyone knows the difference between years and ½ ton to 1 ton... Any info would be appreciated.

Thanks

79k30dually · 12-27-2011, 01:04 PM

Sorry, I don't have any pic's at the moment. I have a 79 4x4 dually I gone from a 350 to a tbi 454 with no mount changes. I believe the 1/2 and 3/4 ton frames are the same, 1 ton frames are thicker and taller. Good luck, Ron

mcmlxix · 12-28-2011, 01:58 AM

I want to see how well they fit in the 1st gen Blazer frame....

12-27-2011, 02:06 AM	#1
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	4x4 engine stands - frame mounts I was looking for some pics and measurements for the mounts that bolt to the frame on 4x4 trucks. If anyone knows the difference between years and ½ ton to 1 ton... Any info would be appreciated. Thanks __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

12-27-2011, 01:04 PM	#2
79k30dually Registered User Join Date: Aug 2011 Location: Newark Ohio Posts: 122	Re: 4x4 engine stands - frame mounts Sorry, I don't have any pic's at the moment. I have a 79 4x4 dually I gone from a 350 to a tbi 454 with no mount changes. I believe the 1/2 and 3/4 ton frames are the same, 1 ton frames are thicker and taller. Good luck, Ron

12-28-2011, 01:58 AM	#3
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: 4x4 engine stands - frame mounts I want to see how well they fit in the 1st gen Blazer frame.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.