2 12bolt housings w/gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 08-28-2003, 01:59 PM

I've got two rear ends I need to get rid of one has a richmond 4.56 gear but the carrier is trash. Housing is cracked but gears ok. The other has an open 3.73 gear mostly complete but needs new bearings and seals. They must go I'm tired of them taking up usefull space. asking $50 dollers for the richmond and make offer on 3.73.

bigjimzlll · 08-28-2003, 02:53 PM

Is the 4.56 a 12 bolt truck ? with a series 4 carrier...If so I would like to buy the gear set

shortbed70 · 09-02-2003, 08:57 PM

Soory it took so long to get back my internet got shut off. I'm not sure on the carrier but it is a 12 bolt truck rear. It came out of my 65. The carrier isn't in the gratest of shape it broke the cross pin bolt and broke the spider gears(2) The gears seem to have no vissible damage thats why I'm selling for 50. You would probably want to take it appart and look at it closer because whomever set it up had too much play in the pinion gear and it rubbed the carrier.

08-28-2003, 01:59 PM	#1
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	2 12bolt housings w/gears I've got two rear ends I need to get rid of one has a richmond 4.56 gear but the carrier is trash. Housing is cracked but gears ok. The other has an open 3.73 gear mostly complete but needs new bearings and seals. They must go I'm tired of them taking up usefull space. asking $50 dollers for the richmond and make offer on 3.73. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

08-28-2003, 02:53 PM	#2
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Is the 4.56 a 12 bolt truck ? with a series 4 carrier...If so I would like to buy the gear set __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

09-02-2003, 08:57 PM	#3
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Soory it took so long to get back my internet got shut off. I'm not sure on the carrier but it is a 12 bolt truck rear. It came out of my 65. The carrier isn't in the gratest of shape it broke the cross pin bolt and broke the spider gears(2) The gears seem to have no vissible damage thats why I'm selling for 50. You would probably want to take it appart and look at it closer because whomever set it up had too much play in the pinion gear and it rubbed the carrier. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.