|
08-08-2003, 11:20 PM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: Portland OR.
Posts: 86
|
Steering box.
Got a 68 and I want to know if you can make a later steering box work. I wanting to try to get a tighter steering radius
|
|
|
|
08-10-2003, 02:58 AM
|
#2 |
|
Account Suspended
Join Date: Apr 2000
Location: Grants Pass, Oregon
Posts: 1,579
|
Should be the same to 72 but I have heard of some guys using late 70's and early 80's.. Most yards can cross refrence them for you
|
|
|
|
|
08-10-2003, 06:44 PM
|
#3 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
a later steering box is not going to change the turning radius of your truck !! it will change the amount of effort and feel but not the radius
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
08-10-2003, 10:11 PM
|
#4 |
|
Registered User
Join Date: Jul 2003
Location: So. Cal.
Posts: 389
|
To change the turning radius of your truck the box will not do this. You would need to change the spindle stop on the lower control arm or the stop on the spindle. I have never done this and don't know if it's a good idea or not. You would have to make sure that you don't create a clearance problem or cause your steering to over-center and cause you to crash. If it works I would try it too.
__________________
1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album |
|
|
|
|
09-02-2003, 11:32 PM
|
#5 |
|
Registered User
Join Date: Aug 2003
Location: Meyersdale, PA
Posts: 144
|
have you tried this conversion yet? if so how did it work? what parts did you use?
__________________
jim gallagher |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
