72 K20 Cab Body & Paint Complete!

[72KAY20]

Read some posts on this site earlier today about the kick panel vents and decided to see if there were any leaves stuck in the bottoms of mine. Glad I did, all kinds of stuff in the driver's side. The passenger side was not too bad.

Removed both vents and used a vacuum to get most of the stuff out. Then sanded and sprayed primer in there. Planning on painting the inside with POR 15 and replacing the seals in both vents. Any suggestions on where to get the best rubber seal material? Assume LMC probably has it but someone may have found other good sources.

Will also be installing some type of leaf guard under the cowl panel. Was thinking of using some type of stainless screen or grid. Saw some black plastic gutter guard on a post that actually looked pretty nice especially for the price. Would think that if it was designed to be used on a gutter that it should hold up ok exposed to the sun's UV rays.