The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-18-2012, 11:27 PM   #1
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
In need of help with engine I.D. numbers

I was just wondering if someone could help me with my 350's block I.D. number found on the front passenger side portion of the block... The I.D. is ( K0630CDD ) and the numbers right under those where ( 1C1256821 ) ..... So if anybody could help figure out Wat exactly I have under the hood of my 65 c10 I would greatly appreciate it...
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Old 01-19-2012, 12:18 AM   #2
camaro_red
Registered User
 
camaro_red's Avatar
 
Join Date: Oct 2007
Location: Prince George Canada
Posts: 267
Re: In need of help with engine I.D. numbers

Look on the back side of the block (behind the head) on the drivers side..There is a casting # there that will tell you what you have for a block..the numbers on the front tell you what vehicle the block was installed in but could very on what year the block is..The casting number will designate what it is, that with the front numbers will give you the info you need..I checked online and did not see a CDD..here is what I did find that was close in the chevy small block engine suffix search of the internet
CUB 1975 350 4 spd trans. J L48 165 4 Vette
CUB 1977 350 LM1 L 170 4 B
CUB 1980 305 LG4 H 155 4 B
CUC 1977 350 LM1 L 170 4 B
CUC 1980 305 LG4 H 155 4 B
CUD 1975 350 h/p, 4 spd T L82 205 4 Vette
CUD 1977 350 LM1 L 170 4 B
CUD 1980 305 LG4 H 155 4 B
__________________
____
______//__{\_____
,/_(O)__/____/_(O)_/
camaro_red is offline   Reply With Quote
Old 01-19-2012, 12:31 AM   #3
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
Re: In need of help with engine I.D. numbers

I will check my block as soon as I get to the shop tomorrow morning, and hopefully that will gives us a lil more detail on what engine it is, but thank u so much for all the help so far camaro red...
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Old 01-19-2012, 10:49 AM   #4
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Arrow Re: In need of help with engine I.D. numbers

Online engine resources (casting numbers, calculators, etc.)
http://67-72chevytrucks.com/vboard/s...28#post5132728
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 01-19-2012, 11:19 AM   #5
Rich 5150 69
Registered User
 
Rich 5150 69's Avatar
 
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
Re: In need of help with engine I.D. numbers

CDD
Camaro 72 350/ 4-b 200hp
Chevelle 72 350/ 4-b 175 hp
GMC sprint 72 350/ 4-b 175 hp
Monte carlo 72 350/ 4-b 175 hp
Nova 72 350/4-b 200 hp
Hollander exchange manual
__________________
`64 C10 vortec 350/350/373 posi
`69 RS/SS 350/350/308
`37 Ford 406/350/324 traclock
`68 Dart 370/904/323 suregrip
Rich 5150 69 is offline   Reply With Quote
Old 01-19-2012, 02:32 PM   #6
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
Re: In need of help with engine I.D. numbers

I finally got around to get the numbers.off the.back of the block and the numbers I found were (1401028) I hope this helps....
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Old 01-19-2012, 02:43 PM   #7
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Talking Re: In need of help with engine I.D. numbers

Small Block Chevy Engine Block Identification
http://67-72chevytrucks.com/vboard/s...d.php?t=353538

The 14 Family:

14010201 305 80-85 Pass,Malibu,Monte, Camaro,Nova,Truck
14010202 305 80-85 Pass,Malibu,Monte, Camaro,Nova,Truck
14010203 305 80-85 Pass,Malibu,Monte, Camaro,Nova,Truck
14010205 267 80-82 Malibu,Monte Carlo
14010207 350 80-85 Pass,Malibu,Camaro
14010207 350 80-81 Truck Light Duty
14010209 350 80-81 Pass,Malibu,Camaro
14010209 350 80-85 Truck Heavy Duty
14010280 267 80-82 Malibu,Monte Carlo
14016376 267 80-82 Malibu,Monte Carlo
14016379 350 77-79 Pass,Chevelle,Camaro, Nova,Monte
14016381 305 76-85 Truck
14016381 305 78-85 Pass,Malibu, Camaro,Nova
14016383 305 80-85 Truck
14088526 350 87 Camaro
14088548 350 86-88 Truck One Piece rear main seal
14088551 305 86-88 Truck One Piece rear main seal
14088551 305 86-88 Pass,Malibu One Piece rear main seal
14093627 305 87 Pass,Malibu One Piece rear main seal
14093638 350 86-87 Truck One Piece rear main seal
14093638 350 87 Camaro One Piece rear main seal
14101148 350 87 Camaro One Piece rear main seal
14102058 305 87 Truck One Piece rear main seal
14102058 305 87 Pass,Malibu,Monte Carlo, Camaro One Piece rear main seal
14316379 350 69-85 Truck Two Piece Rear Main Seal
14316379 350 78-81 Pass,Malibu, Camaro,Nova One Piece Rear Main Seal
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 01-19-2012, 04:29 PM   #8
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
Re: In need of help with engine I.D. numbers

Thank you guys ( camaro, rich and 1bad) for all the help with the I.D. numbers.....
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Old 01-19-2012, 07:14 PM   #9
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
Re: In need of help with engine I.D. numbers

Well this sucks guys, I finally got some time to sit down and put together all these numbers and just realized I was lied to, I was told it had a 350, but I just realized after going through the numbers that its actually a 267...... Boy do I feel dumb, I wish I would have known about all this stuff sooner, but owell.... I guess ill take it as a lesson and learn from my mistakes..... Well at least its a real good looking 267..... But thank you guys for all the help with my dilemma.... It's really appreciated.....
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Old 01-19-2012, 09:37 PM   #10
camaro_red
Registered User
 
camaro_red's Avatar
 
Join Date: Oct 2007
Location: Prince George Canada
Posts: 267
Re: In need of help with engine I.D. numbers

I don't have a ton of posts but have been impressed with the people on the website...Great Bunch
__________________
____
______//__{\_____
,/_(O)__/____/_(O)_/
camaro_red is offline   Reply With Quote
Old 01-19-2012, 10:11 PM   #11
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Arrow Re: In need of help with engine I.D. numbers

Yea,

From what I read the 267 was introduced in 1979 for GM F-Body (Camaro), G-bodies (Chevrolet Monte Carlo, El Camino, and Malibu Classic) and also used on GM B-body cars (Impala and Caprice models). Still in the 3.50 in bore family (1979–1982).

The 267 cu in (4.4 L) had the 350's crankshaft stroke of 3.48" and the smallest bore of any small-block, 3.500 in. The 3.500" bore was also used on the 200 cu in (3.3 L) V6, which was introduced a year earlier. (The 200 was a Chevrolet V6 engine based on the small block with the #3 and #6 cylinders removed). It was available with a Rochester Dualjet 210 - effectively a Rochester Quadrajet with no rear barrels. After 1980, electronic feedback carburetion was used on the 267.

While similar in displacement to the other 4.3-4.4 L V8 engines produced by General Motors (including the Oldsmobile 260 and Pontiac 265, the small bore 267 shared no parts with the other engines and was phased out after the 1982 model year due to inability to conform to emission standards. Chevrolet vehicles eventually used the 305 cu in as its base V8 engine

__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 01-19-2012, 10:20 PM   #12
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Thumbs up Re: In need of help with engine I.D. numbers

Here ya go Frank's65step-side,

Engine I.D. and Codes - YearOne.com
http://www.yearone.com/updatedsingle...ngineinfo1.asp
http://www.yearone.com/updatedsingle...ngineinfo2.asp
http://www.yearone.com/updatedsingle...ngineinfo3.asp
http://www.yearone.com/updatedsingle...ngineinfo4.asp
http://www.yearone.com/updatedsingle...ngineinfo5.asp
http://www.yearone.com/updatedsingle...ngineinfo6.asp

The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain
Online engine resources (casting numbers, calculators, etc.)
http://67-72chevytrucks.com/vboard/s...28#post5132728

Chevy Small Block History - The Best Things Come In Small Packages
More Than 50 Years of Small-Block Chevys
http://www.chevyhiperformance.com/te...y/viewall.html
__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.
1Bad62Pro/Street is offline   Reply With Quote
Old 01-20-2012, 07:08 PM   #13
bigtruckboi2000
Registered User
 
bigtruckboi2000's Avatar
 
Join Date: Apr 2011
Location: Camp Lejeune, NC
Posts: 97
Re: In need of help with engine I.D. numbers

Quote:
Originally Posted by camaro_red View Post
I don't have a ton of posts but have been impressed with the people on the website...Great Bunch
THIS SITE IS OFF THE CHAIN!!!!
__________________
[B][I]1965 Chevy C10 SWB w/350(68-79), 305 H.O Heads, Edelbrock Performer 1406 600 cfm carb, Torquer II Manifold, AC Delco HEI, TH400, Flowmasters,3.07 gears
2005 GMC Yukon XL Denali w/Mangnaflow Exhaust
1983 Cutlass Supreme w/ 350, cam, Holley 650 cfm, Street Dominator intake, carb spacer, hydromatic, Flowmasters
Patriots always talk of dying for their country but never of killing for their country.
bigtruckboi2000 is offline   Reply With Quote
Old 01-20-2012, 08:02 PM   #14
Frank's65step-side
Registered User
 
Join Date: Dec 2011
Location: Plant city, florida
Posts: 9
Re: In need of help with engine I.D. numbers

This site is great.... I'm on here everyday.... Always something interesting happening on here....
Posted via Mobile Device
Frank's65step-side is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com