Let's see some interior pics of 73 to 87's?

[lurch115]

Originally Posted by TexasJeff

Here is mine after redoing it.

where did you get that shelf system for behind the seat, and does it fit with the seat all the way back?

[Dieselwrencher]

Kp110477, where did you get the billet door pulls from? Your interior looks sweet!

[kp110477]

I did not intend for you to think those pictures were mine, I had quoted Moostifier and was asking him if he did the wrap himself or had it done, and if the doors were wrapped, which a closer look at the pictures tells me they are indeed wrapped. Still waiting on the reply on whether he did it himself or not.

[Moostifer]

Originally Posted by kp110477

I did not intend for you to think those pictures were mine, I had quoted Moostifier and was asking him if he did the wrap himself or had it done, and if the doors were wrapped, which a closer look at the pictures tells me they are indeed wrapped. Still waiting on the reply on whether he did it himself or not.

made the door pulls out of 1/2" alum plate. rough cut them on the band saw, then finished them up on the mill. (I used to have access to a machine shop)

I pulled out the interior and had a local shop do it piece by piece... fake leather and suade, then I re-installed it

seat... $250
door panels... I think were $150 each
dash... $200

I did a lot of prep work to the dash and panels before they covered them (filled holes, smoothed cracks, etc..)

[Moostifer]

Originally Posted by Dieselwrencher

Kp110477, where did you get the billet door pulls from? Your interior looks sweet!

...and thanks!

[evowerks]

1973 Sierra Grande interior

[bakerboys]

Ok guys. tell me how you mounted newer model seats in your truck. I would like. Some myself.
Posted via Mobile Device

[Dieselwrencher]

Originally Posted by bakerboys

Ok guys. tell me how you mounted newer model seats in your truck. I would like. Some myself.
Posted via Mobile Device

Modify the brackets and or floor to get them in. In a few weeks I'll be installing a 01 dodge seat in the front and a 02 ford super duty rear seat in the rear of my 76 K30. I'll take pics and post them in my thread for all to see. IDK how or what it's going to take to get them in there yet.

[bharrison1]

Originally Posted by menace121978

heres a couple of mine

awesome!!

[mej005]

1981 Stepside

[Dan1969]

Originally Posted by S10Fan

Here's mine......

Chevy Cavalier seats
05 Caddy console
RodDoors door panels
62 Chevy steering wheel

That shifter...

[S10Fan]

Originally Posted by Dan1969

That shifter...

LOL!

That was the 3-speed configuration, now I'm running a 700R, same handle with a different shape. But, soon I'll be swapping out the home made handle for a Lokar 23" shifter. The Lokar piece will give me a neutral safety switch and positive detent for gear selection.

I also need to grab some updated interior pictures.

[Smoke_Dog]

Those R The seats my mother had in her 1981 step side!!!

Originally Posted by mej005

1981 Stepside

[vegas80step]

Hey no one said it had to be IN the truck right?






top of visor (you only see it if you fold them down...)

[Junqueboi]

[QUOTE=babyJay;5111385]81 factory green transplanted from an 81 Sierra into my 87 V30 plow truck, with LMC Highliner headliner.




LOVE the green: very hard color to find. How much drilling did you have to do to install that LMC headliner?

Thanks.

[Telecasterjoey]

Originally Posted by J Knight

Thanks man, the seat covers are black velour high back from LMC. So far so good, they have only been in there a few months, we will see how long they last because I drive it daily.

These are the other interior pieces I got from LMC.
gauge bezel
dash insert
a/c vents
door panels
window/lock switches
door handle bezels
arm rests
console
carpet
sill plates

That musta cost some $$$
Looks amazing though!

[J Knight]

Originally Posted by Telecasterjoey

That musta cost some $$$
Looks amazing though!

Thanks T, unfortunately Ive already spent $2000 and Im not finished with the interior yet.

[bakerboys]

Man you need to start going to junk yards. With about 100 dollars I bought all i needed other than the.carpet which i ordered for 129.00 and headliner material 25.00 dollars and 3 cans of 6.00 interior paint I re did the.whole interior. Of my truck. Also used some home depot dynamat lol. Cost about 60.00. To sound proof the whole interior of truck. Inside my truck looks brand new. And is super quiet.

All the truck had before i started was a seat and a cracked dash
Posted via Mobile Device

[J Knight]

My previous interior looked like I was shopping at a junkyard.

[bakerboys]

Mine looks like new
Posted via Mobile Device

[bigblock73]

Originally Posted by bakerboys

Mine looks like new
Posted via Mobile Device

Well, quit talkin and start uploading...we'd like to see it.

[bigblock73]

Here are some shots of mine. I am nearyl finished, lots of hours in creating it...money too. Quality interiors are not cheap.

[bigblock73]

More

[bakerboys]

Looks good will post pics asap
Posted via Mobile Device

[mcboomport]

Nice Jeff!! BTW, where can I get the billet cup holders? ha