![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2011
Location: Gardnerville Nevada
Posts: 270
|
Mirror holes
Help please. Can anyone tell me what this 'rivet'on my door is for? I am guessing that it is some sort of alignment for the mirrors? I'm trying to figure out what kind of mirrors to go with since the PO had put some super cheesy mirrors on the truck that didn't even allow the wind wings to open. I'm thinking of going with either the below eyeline mirrors in stainless if anyone has them, or Ford style truck mirrors. I just like the size/durability of bigger mirrors, especially on 4x4 trucks.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2010
Location: Forest Hill, MD
Posts: 171
|
Re: Mirror holes
Like your idea of going with the bigger stainless mirrors Ryanmctee. My K20 originally had white below eye-line mirrors and I replaced them with LMC stainless mirrors that I modified to fit the stock holes. Before and after pics below.
I ordered both tripod types of stainless mirrors from LMC and found that one size had support legs that were too short and than other type had support legs that were too long. I ended taking the long support legs and cutting the top off in a vise and then flattening the ends and folding them over and drilling a hole through them to bolt the mirror support tube to. It is hard to tell they are modified.
__________________
72Kay20 Bel Air, MD 1972 Hugger Orange K20 LWB 350, 4wd, 4spd Sm465, Dana 44, HO52 Other Toys 69 Cortez Silver Z28 86 White Buick T Type |
![]() |
![]() |
![]() |
#3 |
The Niner
![]() Join Date: Nov 2010
Location: Broad Brook, CT
Posts: 2,494
|
Re: Mirror holes
^^^ Great job of making the new mirrors fit. Never woulda guessed you altered them. I wish I had those on mine.
__________________
"A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/ |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Aug 2003
Location: Lubbock, Texas
Posts: 2,443
|
Re: Mirror holes
That plugged hole was needed for the stock sport mirrors. I suspect that the aftermarket mirrors hand a smaller base that did not cover up all 3 original holes so the plugged the one that didnot get covered up with the new mirror base.
__________________
72 Cheyenne Super 80 Silverado Blazer 2wd |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2011
Location: Gardnerville Nevada
Posts: 270
|
Re: Mirror holes
Wow, I never would have guessed that. I'm all for making something work, but that plug sits about 3/16" taller than the door skin. Can anyone say Mickey-Mouse?? I guess it will be more time with the welder filling holes.... Thanks for the help. 72Kay20 your mirrors look great. I think I will go the same route with the LMC mirrors, just the shorter brackets that sit above the top door molding. Thanks again for everyone's help. What an awesome help it is to have a community like this to answer the never ending questions.....
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2009
Location: Arizona
Posts: 404
|
Re: Mirror holes
The LMC mirrors I bought didn't work well for me. They would shake loose at highway speeds. The problem is the male end of the 90 degree elbow seperates from the stainless and makes it impossible to tighten. I went with OEM tripod and 90 degree elbow and used the stainless mirrors from LMC, they work perfect now.
__________________
1972 Chevy short bed ZZ4 350/355hp GMPP crate engine. 1972 Cheyenne K-20 454/400hp big block 1988 Jeep Wrangler 2010 Jeep Sport Unlimited |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2011
Location: Gardnerville Nevada
Posts: 270
|
Re: Mirror holes
Landsurvey, man o man what a great looking truck. Your truck and mine will be pretty similar when mine is finished. You have captured the 'classic' look about as well as anyone I've seen. Great info on the vibration problem you've encountered. That's exactly what I'm looking to pass on. Where did you find the oem brackets for the mirrors?
|
![]() |
![]() |
![]() |
#8 | |
Senior Member
![]() Join Date: Nov 2007
Location: New Blaine, Arkansas
Posts: 751
|
Re: Mirror holes
Quote:
Tim |
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Aug 2011
Location: Gardnerville Nevada
Posts: 270
|
Re: Mirror holes
Just to clarify the 'rivet' it was actually a chrome plug, siliconed into the door. The quality just doesn't stop..... Got the holes welded up and filled. On to new mirrors!
|
![]() |
![]() |
![]() |
#10 |
Back in the sticks
Join Date: Jan 2001
Location: Fordland, MO
Posts: 3,188
|
Re: Mirror holes
You will never cease to be amazed at the ingenuity(retardation) of previous owners. Mine just had bolts tightened down in the holes. At least they were easy to remove.
Got to second the props on Landsurvey's truck. Very nice looking rig!
__________________
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty |
![]() |
![]() |
![]() |
#11 | |
Always Fixing Things
Join Date: Mar 2007
Location: Roseville, CA
Posts: 390
|
Re: Mirror holes
Quote:
__________________
Just an Average Joe ![]() ‘68 GMC 307 3spd – My dad's original truck 310,000 miles |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|