NEW Porterbuilt Bolt-in C-notch

[longbed67]

Thanks!

[67cheby]

Slick !!

[jocko]

that's a really nice product!

[ColoradoK5]

Originally Posted by porterbuilt

I don't have any on hand, as I have not yet installed one myself on a blazer. I have a couple guys on the east coast who are driving their blazers with the stage 2 kits. I will see if I can get some pics.

We have one in the shop that will be getting a stage 2 rear kit with a Dropmember Mild front set-up... but it's gonna be a little while until the blazer is all back together.

Thanks I am currently gathering sheetmetal for my 71 2wd project and looking into your stage 2 kit. look foreward to seeing pics thanks

[PBFAB.COM]

Originally Posted by jocko

that's a really nice product!

Thank you very much!

They are a little more expensive than some of the other available options, but a better design IMO.

The current price of the notch is actually $225.

[bondo510]

What would be the disadvantage of this set up with stock rear arms ? Will it go lower with the tube arms? Sorry trying to keep cost down. On a 68 suburban would it be ok to weld the top and not use the bolts? I think I can get my welder in there. I checked out a 63 truck last weekend with porterbuilt suspension and I am quite impressed with the quality. Its nice to see a company that builds quality stuff .

[PBFAB.COM]

Originally Posted by bondo510

What would be the disadvantage of this set up with stock rear arms ? Will it go lower with the tube arms? Sorry trying to keep cost down. On a 68 suburban would it be ok to weld the top and not use the bolts? I think I can get my welder in there. I checked out a 63 truck last weekend with porterbuilt suspension and I am quite impressed with the quality. Its nice to see a company that builds quality stuff .

We have a "Stage 2 Rear Basic" kit that uses this notch and our shock relocation system along with factory trailing arms. It will allow the axle to bottom out in the notch... just like the tube arms.

The welding of the upper notch could be an option.

Nate

[bondo510]

I think I may have already bought part of that kit off craigslist. A guy had it on a 63 truck but upgraded his arms to your tube style.