CA Wtb - upper radiator "hard tube" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

magwakeenercew2jh · 02-14-2012, 01:23 PM

For a 350. I was just told these came on 4 x 4's....If anyone has one, I'd love to have it.
If anyone knows where I can get one (I'd prefer a new one), I'd love to have the source.

Thanks.

teeitup · 02-14-2012, 01:35 PM

They do not make these anymore. I think I have one out there, $45 shipped for it. Thanks Randy

teeitup · 02-14-2012, 05:23 PM

Bill, the one I have ended up being rusted on the end when I took off the hose, sorry. Thanks Randy

teeitup · 02-14-2012, 05:42 PM

Here is how bad they rust under they hose sometimes

magwakeenercew2jh · 02-14-2012, 07:01 PM

Thanks for looking, Randy.
I really appreciate it.

Anybody else?

Bill

**too much stuff** · 02-14-2012, 07:04 PM

I think i have a decent one here. Looking at $55 shipped. I will try to put up a pic later.

_Ogre · 02-14-2012, 07:05 PM

unless you need stock oem...
i made hard lines for my 58 out of ss tubing.
3 bends and a little welding and grinding,
you'd have a rust free replacement

my lower line had to go around a low ac compressor
and has a port to screw my fan sensor into it.

stealthy '69 · 02-14-2012, 09:24 PM

what diameter pipe were these factory?

**too much stuff** · 02-15-2012, 11:15 PM

Here is what i have. I don't see any issues other than pitting. Should be fine once the hose is on.

supercheyenne1972 · 02-16-2012, 12:40 AM

Eric Ill take it if magwakeenercew2jh passes Thanks Ray

magwakeenercew2jh · 02-16-2012, 12:45 AM

Go for it Super.

Im some time away from needing one.
Posted via Mobile Device

Curt's_72 · 02-16-2012, 12:26 PM

I'm in the market for one of these for my resto. Anybody else have one they would part with?
Thanks,
Curt

02-14-2012, 01:23 PM	#1
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Wtb - upper radiator "hard tube" For a 350. I was just told these came on 4 x 4's....If anyone has one, I'd love to have it. If anyone knows where I can get one (I'd prefer a new one), I'd love to have the source. Thanks. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat. Last edited by magwakeenercew2jh; 02-14-2012 at 01:32 PM.

02-14-2012, 01:35 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb - upper radiator "hard tube" They do not make these anymore. I think I have one out there, $45 shipped for it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-14-2012, 05:23 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb - upper radiator "hard tube" Bill, the one I have ended up being rusted on the end when I took off the hose, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-14-2012, 05:42 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wtb - upper radiator "hard tube" Here is how bad they rust under they hose sometimes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-14-2012, 07:01 PM	#5
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: Wtb - upper radiator "hard tube" Thanks for looking, Randy. I really appreciate it. Anybody else? Bill __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

02-14-2012, 07:04 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Wtb - upper radiator "hard tube" I think i have a decent one here. Looking at $55 shipped. I will try to put up a pic later. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-14-2012, 07:05 PM	#7
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Wtb - upper radiator "hard tube" unless you need stock oem... i made hard lines for my 58 out of ss tubing. 3 bends and a little welding and grinding, you'd have a rust free replacement my lower line had to go around a low ac compressor and has a port to screw my fan sensor into it. __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

02-15-2012, 11:15 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Wtb - upper radiator "hard tube" Here is what i have. I don't see any issues other than pitting. Should be fine once the hose is on. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-16-2012, 12:40 AM	#10
supercheyenne1972 Registered User Join Date: Feb 2009 Location: St. Charles Missouri Posts: 133	Re: Wtb - upper radiator "hard tube" Eric Ill take it if magwakeenercew2jh passes Thanks Ray

02-16-2012, 12:45 AM	#11
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: Wtb - upper radiator "hard tube" Go for it Super. Im some time away from needing one. Posted via Mobile Device __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

02-16-2012, 12:26 PM	#12
Curt's_72 Registered User Join Date: Oct 2006 Location: Peru, Indiana Posts: 204	Re: Wtb - upper radiator "hard tube" I'm in the market for one of these for my resto. Anybody else have one they would part with? Thanks, Curt __________________ Click below to see my build thread...lot's of stuff there http://67-72chevytrucks.com/vboard/s...d.php?t=494493

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.