![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2007
Location: sun valley
Posts: 98
|
Finally wired my power doors and mirrors
I put these doors on my truck off a 91 suburban with power mirrors about a year ago. I finally got them wired up. The mirror and door harness were cut so I got the door harness off another truck and made my own mirror harness with spare wire.
![]() Driver side mirror harness ![]() Pass. Side harness. ![]() Inside harness ![]() ![]() ![]() ![]() Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2011
Location: Bradford, PA
Posts: 395
|
Re: Finally wired my power doors and mirrors
nice man! I got lazy and cut the mirror and lock wiring completely out of my burb doors. Now that I think about it, I probably should of wired them up too! I just have my windows wired and I did a half assed job. Your harness looks pretty good!
![]() If you look at all that loose wiring coming from my door, that's all the wires. No connectors, all soldered together and ran across the engine bay. One of these days I plan on doing it right lol.
__________________
1981
![]() 305 ci | TH350 | NP208 | 60k miles |
![]() |
![]() |
![]() |
#3 |
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: Finally wired my power doors and mirrors
Looks pretty good. Wish I had power windows in my truck sometimes haha!
Posted via Mobile Device
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold ![]() -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit ![]() ![]() -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER ![]() I would rather push a Chevy then drive a ford!!
![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2007
Location: sun valley
Posts: 98
|
Re: Finally wired my power doors and mirrors
Yeah I got tired of having to reach over to open the Windows. Seth how do you have power to the doors. That's quick way to do it for sure. I cut holes on the cab when I had the doors off.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2011
Location: Bradford, PA
Posts: 395
|
Re: Finally wired my power doors and mirrors
I put a relay on my door, and ran all the wires from the main switch over to the pass. side switch, then ran the main power through a hole in the firewall and hooked it to a terminal on the fuse box.
__________________
1981
![]() 305 ci | TH350 | NP208 | 60k miles |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|