IN Parting Out a 1967 Chevy C20 Small Back Window, Long Bed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Delta9 · 02-19-2012, 12:57 AM

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

Delta9 · 02-19-2012, 01:02 AM

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. i wont have my truck till the end of May if u want the trade. (as long as the 67 front clip is not destroyed)

**Todd68Chevy** · 02-19-2012, 01:06 AM

Quote:

Originally Posted by Delta9

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

I might have this front clip sold locally but If it does not go through I will put it up for sale. The grille is real good, fenders are decent, the rear bottom is rusted and the back side of the front cup is rusted, the outside looks pretty good. The core support looks real good on the left side but the right side has some rust. The grille hoops and headlight bezels are painted but look real nice. Wiring harness even looks good. I have not looked the hood over real good but it looks like it is not rusted along the edge but does have some bondo filling a dent. I will let you know if the local sale does not go thru. Be safe over there and thanks for all you do.

Delta9 · 02-19-2012, 01:03 AM

sry my pics are not goin through

Meatman · 02-19-2012, 01:28 AM

C20 badges shipped to 66614?

**Todd68Chevy** · 02-19-2012, 11:41 PM

Quote:

Originally Posted by Meatman

C20 badges shipped to 66614?

$16.00 shipped

Meatman · 02-20-2012, 12:13 AM

Ill take em. Pm me payment info. Thanks!

Quote:

Originally Posted by Todd68Chevy

$16.00 shipped

**Todd68Chevy** · 02-20-2012, 12:16 AM

Quote:

Originally Posted by Meatman

Ill take em. Pm me payment info. Thanks!

PM sent, Thanks, Todd

shawno72 · 02-19-2012, 01:56 AM

Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you.
Posted via Mobile Device

**Todd68Chevy** · 02-19-2012, 11:44 PM

Quote:

Originally Posted by shawno72

Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you.
Posted via Mobile Device

The only ones I have at this time is on this grille and I do not want to seperate them until I know my offers to buy the doghouse have fell thru. I will try to keep you in mind if I get any. Thanks

Delta9 · 02-19-2012, 02:05 AM

ok thnx just let me know how much or if u want to do a trade+cash deal i would like pics of the (problem areas if you dont mind.
Thnx again
Ken

duallyjams · 02-19-2012, 09:17 AM

What size are the rims ? are all 4 a match with clips for the hub caps.

**Todd68Chevy** · 02-19-2012, 11:48 PM

Quote:

Originally Posted by duallyjams

What size are the rims ? are all 4 a match with clips for the hub caps.

They are 16" split rims. They look like they match to me. There is actually 5 of them because this truck has a spare. Are you wanting split rims? I have no idea of a good cost effective way to ship them.

**Todd68Chevy** · 02-19-2012, 10:37 PM

Well I got it pretty much apart today. I will be getting rid of what is let sometime this week so if you see something you need let me know. Here are some pictures of what is left. The cab and bed are rough.

I will catching up on prices and shipping so if you posted check the following threads.

The roof and back window area looks good but a little rust starting at the top of the windshield on the inside $75.00 no shipping-- does anybody need that?

**michael bustamante** · 02-20-2012, 11:16 AM

put me in for the hubcaps and guages if madness bb passes. thanks!! also, how are them inside door handles?

MadnessBigBlock · 02-20-2012, 01:20 PM

I will take all of it pending package price shipped to 58265. Thanks, Brett
Posted via Mobile Device

**Todd68Chevy** · 02-20-2012, 01:36 PM

Quote:

Originally Posted by duallyjams

I was hoping that they were not split rim.Thanks for the pics though. Pass.

Sorry, I really did not think the split rims have much value because there is no one around here that will even mount a tire on one. Thanks

Quote:

Originally Posted by michael bustamante

put me in for the hubcaps and guages if madness bb passes. thanks!! also, how are them inside door handles?

You are second if it does not work out for some reason. Thanks

Quote:

Originally Posted by MadnessBigBlock

I will take all of it pending package price shipped to 58265. Thanks, Brett
Posted via Mobile Device

I will get the shipping figured out tonight after work. Thanks

**Todd68Chevy** · 02-20-2012, 10:35 PM

Quote:

Originally Posted by MadnessBigBlock

I will take all of it pending package price shipped to 58265. Thanks, Brett
Posted via Mobile Device

Well I found a single box that will hold it all to help the shipping cost. The USPS Parcel Post is $20.00, UPS is $25.00 and USPS Priority Mail is $39.00 Thanks, Let me know.

**michael bustamante** · 02-20-2012, 05:46 PM

Are the inside door handles pretty ok?

tooter · 02-20-2012, 07:34 PM

If you still have them Will you sell exterior door handles ? shipped 39562

nplocoman · 02-20-2012, 08:11 PM

Interested in the mico brake lock. Price with shipping to 69101.

**Todd68Chevy** · 02-20-2012, 10:45 PM

Quote:

Originally Posted by nplocoman

Interested in the mico brake lock. Price with shipping to 69101.

Looks like a line lock to me. Do you want the switch, plate and solenoid? I have no idea if it works. $10.00 plus shipping. I can get pictures tomorrow night. Thanks

nplocoman · 02-21-2012, 09:33 PM

Quote:

Originally Posted by Todd68Chevy

Looks like a line lock to me. Do you want the switch, plate and solenoid? I have no idea if it works. $10.00 plus shipping. I can get pictures tomorrow night. Thanks

Yes I am still wanting all of this. Can you take some pic's of the solenoid and lines. I may want some of the lines as well.

**Todd68Chevy** · 02-20-2012, 10:40 PM

Quote:

Originally Posted by tooter

If you still have them Will you sell exterior door handles ? shipped 39562

They are being sold with the doors locally. If it does not work out, I will let you know and get them priced.

**Todd68Chevy** · 02-20-2012, 10:38 PM

Quote:

Originally Posted by michael bustamante

Are the inside door handles pretty ok?

I am not sure what they are supposed to look like but here is a picture of what I have that came with the truck.

02-19-2012, 12:57 AM	#1
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

02-19-2012, 01:02 AM	#2
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. i wont have my truck till the end of May if u want the trade. (as long as the 67 front clip is not destroyed)

02-19-2012, 01:03 AM	#4
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed sry my pics are not goin through

02-19-2012, 01:28 AM	#5
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed C20 badges shipped to 66614? __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

02-19-2012, 01:56 AM	#9
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-19-2012, 02:05 AM	#11
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed ok thnx just let me know how much or if u want to do a trade+cash deal i would like pics of the (problem areas if you dont mind. Thnx again Ken

02-19-2012, 09:17 AM	#12
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed What size are the rims ? are all 4 a match with clips for the hub caps. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-19-2012, 10:37 PM	#14
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Well I got it pretty much apart today. I will be getting rid of what is let sometime this week so if you see something you need let me know. Here are some pictures of what is left. The cab and bed are rough. I will catching up on prices and shipping so if you posted check the following threads. The roof and back window area looks good but a little rust starting at the top of the windshield on the inside $75.00 no shipping-- does anybody need that? Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-20-2012, 11:16 AM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed put me in for the hubcaps and guages if madness bb passes. thanks!! also, how are them inside door handles? __________________ 1967custom

02-20-2012, 01:20 PM	#16
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed I will take all of it pending package price shipped to 58265. Thanks, Brett Posted via Mobile Device

02-20-2012, 05:46 PM	#19
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Are the inside door handles pretty ok? __________________ 1967custom

02-20-2012, 07:34 PM	#20
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed If you still have them Will you sell exterior door handles ? shipped 39562 __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

02-20-2012, 08:11 PM	#21
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Interested in the mico brake lock. Price with shipping to 69101.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.