GA WTT - Bed for Bed **Lots of Pics** - The 1947 - Present Chevrolet & GMC Truck Message Board Network

funkytechmonkey · 11-21-2011, 01:54 PM

I would like to find someone that has a really nice bed that is willing to trade straight up or if it is nicer than mine I am willing to come out of pocket. The reason I am looking to trade if because I am dead set on doing a wood bed and bed fill. This bed had a bed liner and already has a sidefill installed. The fenders are tubbed BIG so you can pretty much put anything you want under there. I would much rather find someone that is willing to trade than go thru all the work of removing the bed liner and filling in the sidefill. Its a shot in the dark... but I am sure there is someone out there that is looking for a side fill bed.

I am NOT willing to downgrade. It has to be of equal quality or better. 67-72... I plan on shaving the marker lights so any of those years will be fine.

Here are some pics...

Here are some pics of the imperfections....

I think the guy before more was loading a motorcycle and it dented this and chipped the paint. nother major.

There are a few small bubbles above the drivers side fenders

and a small crack in the paint above the passangers side fender

The paint has flaked off here... there is no rust here its just the orange that flaked off.

**D.PASSMORE** · 11-21-2011, 02:15 PM

Whats your level of body work skill or were going to farm out any body work needed? I have a SWB bed- floor is pretty much shot/sides are good. Maybe we can work something out. I do realize what you are saying in your post. Just throwing out some ideas. DP

**steinepstein** · 11-21-2011, 02:40 PM

Check out my build on the link, I can get you other pics also.

But I have a wood bed with filled lights, I'd love to switch out with you.

Jon

**steinepstein** · 11-21-2011, 02:43 PM

I only have a pic of the bed on page one, but the rear tailights and marker lights have been filled. This truck came from NM so there is absolutely no rust and it is very straight. The tailgate is also shaved, so it is open in the back.

funkytechmonkey · 11-21-2011, 03:43 PM

Quote:

Originally Posted by D.PASSMORE

Whats your level of body work skill or were going to farm out any body work needed? I have a SWB bed- floor is pretty much shot/sides are good. Maybe we can work something out. I do realize what you are saying in your post. Just throwing out some ideas. DP

I dont have any body skills at all. I am really looking for something that is complete or pretty close to being complete.

Quote:

Originally Posted by steinepstein

Check out my build on the link, I can get you other pics also.

But I have a wood bed with filled lights, I'd love to switch out with you.

Jon

Jon... that does look nice but the lights are a problem for me.. I really want to keep the factory look of the lights.

**steinepstein** · 11-21-2011, 03:48 PM

Sounds good, thanks for checking it out.

funkytechmonkey · 11-22-2011, 01:06 PM

bump

dlblzr · 11-22-2011, 01:25 PM

You could save yourself alot of work and just put a wood overlay. They loo just as good.

funkytechmonkey · 12-31-2011, 09:30 AM

Yea... i could do that but I would still have to strip the bed liner, fill in the side fill and remove the side fill channel and fill it in. I would rather find someone that wants to do a side fill and do an even swap. If that is even possible.

The sidefill was done really well on this one.

70 Chevy C10 · 02-27-2012, 10:20 PM

Are you still looking to trade bed? I have a bed off of a 67 shortbed. It has been tubbed but can easily removed. Was like that when I got it. I have a new front panel for the bed being there is a couple round holes cut in it from a roll cage. I like in Kentucky and may be interested in trading you simply because I want to do a sprayed in liner and a side fill. I got this bed from Valdosta Georgia last fall. My cell number is 859-240-4120, if you have any questions. Thanks Doug

funkytechmonkey · 02-27-2012, 11:12 PM

Yea I am still looking. I sent you a pm
Posted via Mobile Device

HeavyMetalChevy · 02-28-2012, 01:09 AM

swb for swb correct?

funkytechmonkey · 02-28-2012, 01:25 AM

Yes... that is correct. Or if someone has some NEW bed panels for trade I am sure we can work out something

funkytechmonkey · 02-28-2012, 01:27 AM

Quote:

Originally Posted by HeavyMetalChevy

swb for swb correct?

BTW...did you get the fuel pump?

HeavyMetalChevy · 02-28-2012, 01:33 AM

HAH!!! I was just going to respond with a satisfactory yes... It had rusted by the time it got here!!! lol Just messing. I know the shipping world all too well!!! Thanks and I was asking bout short for short because I only have a rust free long from AZ. I tried.

11-21-2011, 01:54 PM	#1
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	WTT - Bed for Bed Lots of Pics I would like to find someone that has a really nice bed that is willing to trade straight up or if it is nicer than mine I am willing to come out of pocket. The reason I am looking to trade if because I am dead set on doing a wood bed and bed fill. This bed had a bed liner and already has a sidefill installed. The fenders are tubbed BIG so you can pretty much put anything you want under there. I would much rather find someone that is willing to trade than go thru all the work of removing the bed liner and filling in the sidefill. Its a shot in the dark... but I am sure there is someone out there that is looking for a side fill bed. I am NOT willing to downgrade. It has to be of equal quality or better. 67-72... I plan on shaving the marker lights so any of those years will be fine. Here are some pics... Here are some pics of the imperfections.... I think the guy before more was loading a motorcycle and it dented this and chipped the paint. nother major. There are a few small bubbles above the drivers side fenders and a small crack in the paint above the passangers side fender The paint has flaked off here... there is no rust here its just the orange that flaked off. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

11-21-2011, 02:15 PM	#2
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: WTT - Bed for Bed Lots of Pics Whats your level of body work skill or were going to farm out any body work needed? I have a SWB bed- floor is pretty much shot/sides are good. Maybe we can work something out. I do realize what you are saying in your post. Just throwing out some ideas. DP __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

11-21-2011, 02:40 PM	#3
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: WTT - Bed for Bed Lots of Pics Check out my build on the link, I can get you other pics also. But I have a wood bed with filled lights, I'd love to switch out with you. Jon __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

11-21-2011, 02:43 PM	#4
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: WTT - Bed for Bed Lots of Pics I only have a pic of the bed on page one, but the rear tailights and marker lights have been filled. This truck came from NM so there is absolutely no rust and it is very straight. The tailgate is also shaved, so it is open in the back. __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

11-21-2011, 03:48 PM	#6
steinepstein Senior Member Join Date: Nov 2003 Location: Chicago, IL Posts: 374	Re: WTT - Bed for Bed Lots of Pics Sounds good, thanks for checking it out. __________________ Project Burro Viejo: http://67-72chevytrucks.com/vboard/s....php?p=3778216

11-22-2011, 01:06 PM	#7
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Bed for Bed Lots of Pics bump __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

11-22-2011, 01:25 PM	#8
dlblzr Registered User Join Date: Jul 2010 Location: los angeles , ca. Posts: 159	Re: WTT - Bed for Bed Lots of Pics You could save yourself alot of work and just put a wood overlay. They loo just as good.

12-31-2011, 09:30 AM	#9
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Bed for Bed Lots of Pics Yea... i could do that but I would still have to strip the bed liner, fill in the side fill and remove the side fill channel and fill it in. I would rather find someone that wants to do a side fill and do an even swap. If that is even possible. The sidefill was done really well on this one. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

02-27-2012, 10:20 PM	#10
70 Chevy C10 Registered User Join Date: Feb 2012 Location: Morning View, Ky Posts: 5	Re: WTT - Bed for Bed Lots of Pics Are you still looking to trade bed? I have a bed off of a 67 shortbed. It has been tubbed but can easily removed. Was like that when I got it. I have a new front panel for the bed being there is a couple round holes cut in it from a roll cage. I like in Kentucky and may be interested in trading you simply because I want to do a sprayed in liner and a side fill. I got this bed from Valdosta Georgia last fall. My cell number is 859-240-4120, if you have any questions. Thanks Doug

02-27-2012, 11:12 PM	#11
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Bed for Bed Lots of Pics Yea I am still looking. I sent you a pm Posted via Mobile Device __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

02-28-2012, 01:09 AM	#12
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTT - Bed for Bed Lots of Pics swb for swb correct? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-28-2012, 01:25 AM	#13
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: WTT - Bed for Bed Lots of Pics Yes... that is correct. Or if someone has some NEW bed panels for trade I am sure we can work out something __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

02-28-2012, 01:33 AM	#15
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTT - Bed for Bed Lots of Pics HAH!!! I was just going to respond with a satisfactory yes... It had rusted by the time it got here!!! lol Just messing. I know the shipping world all too well!!! Thanks and I was asking bout short for short because I only have a rust free long from AZ. I tried. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.