lift kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66C10 · 09-08-2003, 06:33 PM

dose anybody know where i could get a lift kit for a 66 chevy c10/k10

kennyw · 09-11-2003, 06:21 PM

I would give Steve at Off Road Design a call.
http://www.offroaddesign.com/

They can get you custom built springs for your truck.

NAPCO ken · 09-12-2003, 04:40 PM

I used 69-72 6" front lift springs from Superlift for the front end of my 1969 GMC Suburban 4x4. The only thing you need to change is the bushings. Any decent spring shop should be able to press in the old style bushings (Deaver Spring in Santa Ana, CA did it for me). For the rear, you can either use an add-a-leaf or get rear lift springs for a 69-87 Chevy truck (make sure they are the 52" ones and NOT the 56" ones). This is the only way to put together a lift for this vintage of trucks...no one offers a lift kit in kit form.

NAPCO ken · 09-12-2003, 04:42 PM

Oops, my post should have read that I used 1969-1972 Chevy front 6" Superlift springs on my 1960 GMC Suburban 4x4.

66C10 · 09-14-2003, 03:20 PM

thanks alot

09-08-2003, 06:33 PM	#1
66C10 Registered User Join Date: Jul 2003 Posts: 13	lift kits dose anybody know where i could get a lift kit for a 66 chevy c10/k10

09-11-2003, 06:21 PM	#2
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	I would give Steve at Off Road Design a call. http://www.offroaddesign.com/ They can get you custom built springs for your truck. __________________ "I got it one piece at a time and it didn't cost me a dime..."

09-12-2003, 04:40 PM	#3
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	I used 69-72 6" front lift springs from Superlift for the front end of my 1969 GMC Suburban 4x4. The only thing you need to change is the bushings. Any decent spring shop should be able to press in the old style bushings (Deaver Spring in Santa Ana, CA did it for me). For the rear, you can either use an add-a-leaf or get rear lift springs for a 69-87 Chevy truck (make sure they are the 52" ones and NOT the 56" ones). This is the only way to put together a lift for this vintage of trucks...no one offers a lift kit in kit form. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

09-12-2003, 04:42 PM	#4
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	Oops, my post should have read that I used 1969-1972 Chevy front 6" Superlift springs on my 1960 GMC Suburban 4x4. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-14-2003, 03:20 PM	#5
66C10 Registered User Join Date: Jul 2003 Posts: 13	thanks alot



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.