Door Window Part Help

[JRANGER]

Ok inside the door the window goes down a channel and in my driver side door it is missing...Where do I get this part and what is it called? I would like my window to stop wobbling and also go down all the way. (dude before me put a stop in the door so it wouldnt just fall in there and get stuck

[J Knight]

Are you referring to the felt strip that fits in the channel?
Posted via Mobile Device

[JRANGER]

no im reffering the channel itself on the inside of the door...It is complete gone...

[J Knight]

LMC sells the rear channel for $20, but I'm sure you could get that piece at the salvage yard.
Posted via Mobile Device

[TDS-MN]

Yes, there is a channel to the rear of the side-glass window, that screws to the door jamb. The front edge of the side glass runs in a track that is integral with the wing window. As mentioned, it should be easy enough to find one at a salvage yard, if you don't want to purchase new. I have one on my workbench that came from the salvage yard, and it was much cheaper than ordering a replacement.

It looks like it should be part # 337715, from the exploded diagram I have, but just reffered to as a 'lift channel'.

[JRANGER]

Originally Posted by TDS-MN

Yes, there is a channel to the rear of the side-glass window, that screws to the door jamb. The front edge of the side glass runs in a track that is integral with the wing window. As mentioned, it should be easy enough to find one at a salvage yard, if you don't want to purchase new. I have one on my workbench that came from the salvage yard, and it was much cheaper than ordering a replacement.

It looks like it should be part # 337715, from the exploded diagram I have, but just reffered to as a 'lift channel'.

Thx...might take a trip to pull a part in a couple weeks to try to get one
Posted via Mobile Device