|
03-19-2012, 04:54 PM
|
#1 |
|
Registered User
Join Date: Mar 2012
Location: Newalla,Oklahoma
Posts: 2
|
Header issues
i bought a pair of headman headers and its seems like the passenger side header is not allowing to make good mating connection with the head after bolts have been snugged firmly, due to the mounting bracket for the leaf spring... any help would be very useful
|
|
|
|
03-19-2012, 04:57 PM
|
#2 |
|
so easy a caveman can do it...
 
Join Date: May 2006
Location: Albuquerque, NM
Posts: 419
|
Re: Header issues
BFH? (big f*&^%$ hammer)
|
|
|
|
|
03-19-2012, 05:37 PM
|
#3 | |
|
Registered User
Join Date: Jan 2011
Location: Lynn Haven Florida
Posts: 1,019
|
Re: Header issues
Quote:
mine look like they were in a hail storm but i bought cheap ones but they were stainless steel. and i have angle plug heads. So try the hammer don't look like it would take much Last edited by Fldawg; 03-19-2012 at 05:38 PM. Reason: mispeled a word |
|
|
|
|
|
03-19-2012, 09:57 PM
|
#4 |
|
Registered User
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
|
Re: Header issues
Headers are a pita, In your case I would try to put a big long pipe in the collector and pull the other end of it the other way using some ratchet straps or a come along. while banging the header around a lil' I must say though the ball flanges on the hedmans are great and really help out with sealing angled pipes. I've never had a fit problem with hedmans either
__________________
81 camaro 355 4/spd 342 posi my first love  .67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover. |
|
|
|
|
03-20-2012, 10:24 AM
|
#5 |
|
Registered User
Join Date: Mar 2012
Location: Newalla,Oklahoma
Posts: 2
|
Re: Header issues
After looking at the header itself the mating surface is bent outwards preventing it from seating... I called headman and they are sending another pair.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
