WY 1972 Cheyenne Super woodgrain interior. Near NOS!

[Cheyenne Dan]

Thanks Richard! That sounds pretty simple, now I just need to see if the little parts are included with the throttle control or if they were part of the bezel sale.
Posted via Mobile Device

[70LonghornCST]

Originally Posted by Cheyenne Dan

Thanks Richard! That sounds pretty simple, now I just need to see if the little parts are included with the throttle control or if they were part of the bezel sale.
Posted via Mobile Device

If it wasn't it shouldn't be too hard to find on this forum. Post a WTB thread if you need, someone will cough one up.

[DANTIP]

I'll take the throttle control if available.

[sharpie1972]

Originally Posted by Cheyenne Dan

Thanks Richard! That sounds pretty simple, now I just need to see if the little parts are included with the throttle control or if they were part of the bezel sale.
Posted via Mobile Device

Throttle control is complete setup. Thanks, Sharpie

[sharpie1972]

Originally Posted by DANTIP

I'll take the throttle control if available.

Hi Dan, I think we should give Cheyenne Dan a shot at it since he was asking about completeness of setup. You are up if he passes. Thanks, Sharpie

[DANTIP]

Originally Posted by sharpie1972

Hi Dan, I think we should give Cheyenne Dan a shot at it since he was asking about completeness of setup. You are up if he passes. Thanks, Sharpie

No problem!! Thanks!

[sharpie1972]

Originally Posted by 70LonghornCST

Sharpie,
How are the vent ball and housings? How much shipped to 95357?
-Richard

Hi Richard, by far the nicest set of originals I've seen, and they blow cold! Ha Ha. $150 shipped for the pair. Thanks, Sharpie

[sharpie1972]

Passenger side

[DANTIP]

Droooooooll!!!!!!

[sharpie1972]

Headliner and visor pics for 72 Super. Headliner and visors are mint. Chrome on trim is excellent. I found one stress crack at screw hole in trim and 3 tabs half missing (two are at screw hole, so they hold fine and the other catches on the half tab fine). Top side of visors could use a detail from dust collecting. Backside of headliner is perfect as well and nice and flat. Thanks, Sharpie

[sharpie1972]

....

[72 Super]

Dennis,

As long as I am first,

I am definite on the headliner and visors per your description. I will be in touch with you tomorrow evening for details on the other parts.

Also interested in the AC vent housings and balls if Richard (70LonghornCST) passes

Thanks,
Ray

[Cheyenne Dan]

Hi Sharpie, I'll take the throttle control, pm me your payment info when you have a chance. Thanks, Dan
Posted via Mobile Device

[70LonghornCST]

I'll take the housing and A/C balls. Boy that just sounds wrong

[sharpie1972]

PM's sent with payment info. Thanks, Sharpie

[cdp]

Sharpie, are you splitting up all a/c pieces? need fresh air inlet door assy complete and right inlet door that mounted to the kick panel with vacuum pods for both. How are the hard lines to and from condenser? I know these are not the easiest to get apart. Maybe the condenser/drier and all that hardware also. I need of some nice seat belt bolts all 4. Would you part with the brake pedal pad,park brake pad and gas pedal with the trim? I looking for dome lamp harness for doors and pin switches. How nice is the center vent? Thanks Chris

[sharpie1972]

Originally Posted by cdp

Sharpie, are you splitting up all a/c pieces? need fresh air inlet door assy complete and right inlet door that mounted to the kick panel with vacuum pods for both. How are the hard lines to and from condenser? I know these are not the easiest to get apart. Maybe the condenser/drier and all that hardware also. I need of some nice seat belt bolts all 4. Would you part with the brake pedal pad,park brake pad and gas pedal with the trim? I looking for dome lamp harness for doors and pin switches.

Hi Chris, I'm keeping the A.C. intact on this one but I have another Cheyenne A.C. truck coming in soon. Should be able to round you up another parts lot from it. Thanks, Sharpie

[deezilboy]

Originally Posted by sharpie1972

1972 Cheyenne Super woodgrain interior pieces. These are from a low mile Cheyenne Super 30 camper rig. The overhang has protected the woodgrain from sunfade and the low miles have prevented wear.

Glovebox door. Near perfect woodgrain and Cheyenne Super emblem. $300 shipped.

Woodgrain door inserts. Near perfect with very little wear. $300 shipped. Door panels are a little chalky. I will include them with the inserts for an extra $100 if needed.

Dash bezel. Very nice woodgrain with the chrome trim. $200 shipped for the bezel or $250 complete with gauges. SOLD

1972 throttle control setup. Complete and working. $150 shipped.

White headliner with beautiful trim. $350 shipped (contingent on trim tabs remaning intact during removal).

I am also willing to make a package deal on glovebox, inserts, and dash bezel for $750 shipped to keep the matching woodgrain together. Thanks, Sharpie

I will take all the woodgrain for 750 if still available. Thanks Deezilboy

[sharpie1972]

Originally Posted by deezilboy

I will take all the woodgrain for 750 if still available. Thanks Deezilboy

Dash sold and other woodgrain is pending. Thanks, Sharpie

[Cheyenne Dan]

Payment sent on throttle control. Thanks again Sharpie! Dan
Posted via Mobile Device

[sharpie1972]

Originally Posted by Cheyenne Dan

Payment sent on throttle control. Thanks again Sharpie! Dan
Posted via Mobile Device

Hi Dan, got it. Thanks! Sharpie

[sharpie1972]

Inside handle pics for 72 Super. As close to NOS as I've seen for original handles. Thanks, Sharpie

[sharpie1972]

.....

[72blazr]

The suspense is killing me. Awesome stuff but can't seem to catch a glimpse of belts in background.
Posted via Mobile Device

[sharpie1972]

Originally Posted by 72blazr

The suspense is killing me. Awesome stuff but can't seem to catch a glimpse of belts in background.
Posted via Mobile Device

OK, here you go! Retractor covers are very nice with no sun damage. Chrome and buckle covers are very nice. Webbing will need some cleaning. Thanks, Sharpie