|
|
|
03-29-2012, 07:40 AM
|
#1 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: Project: LS1ick68
I sure will. I can't beleive how expensive headers are, so I was surprised to see the price on these. They look like good quality peices, so I don't expect any issues. I'll test fit them first, then have them ceramic coated. I can get them coated locally for $140.
That'll put me into a set of coated stainless headers for under $400. I also ordered my 4.10 ring & pinion yesterday, and these little boogers for the steam holes. I ordered 2 blanks for the rear, and two with 1/8" NPT ports. I'll probably drill and tap an 1/8" port in the water pump, and either use -4AN hose or 1/4" brake line for plumbing.
__________________
Last edited by 68Stepbed; 03-29-2012 at 08:20 AM. |
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
