CA 1971-72 Hood Latch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 03-18-2012, 05:58 PM

I got this somewhere along the way. It is really nice. It's been blasted. $18 shipped will get it to you.

70LonghornCST · 03-21-2012, 12:44 AM

$15 shipped

**special-K** · 03-21-2012, 11:13 AM

A quality part for about free. Wowsers! Who needs this? I have too many already or I'd...

GMC AMI · 03-21-2012, 11:57 AM

Quote:

Originally Posted by 70LonghornCST

I got this somewhere along the way. It is really nice. It's been blasted. $18 shipped will get it to you.

It is nice for 67 or 68 Chevy truck for sure. I am surprised the K-Man did not point that out, he knows more than most about these parts. It will not work for 71 or 72 grilles. They require a diff. piece. Heads up on a great deal TTT.

70LonghornCST · 03-21-2012, 08:39 PM

Quote:

Originally Posted by GMC AMI

It is nice for 67 or 68 Chevy truck for sure. I am surprised the K-Man did not point that out, he knows more than most about these parts. It will not work for 71 or 72 grilles. They require a diff. piece. Heads up on a great deal TTT.

So, this is a 67-68? How can one tell?

**special-K** · 03-21-2012, 09:01 PM

I believe it's a 69-72. The stamping in front rises up steep like the hoods and 67/68s are sloped like the hoods. But,I don't think it even matters.

70LonghornCST · 03-21-2012, 09:05 PM

Ok, that's what I thought. I remember when I got this that it was 'said' to come off of a '72. Thanks for the reply

And yes, I am basically giving this away, as the shipping will be $11.50 for a flat rate box.

If no takers, I'll use it as a paper weight in my garbage can

**Classic Bowties** · 03-21-2012, 11:29 PM

Quote:

Originally Posted by GMC AMI

It is nice for 67 or 68 Chevy truck for sure. I am surprised the K-Man did not point that out, he knows more than most about these parts. It will not work for 71 or 72 grilles. They require a diff. piece. Heads up on a great deal TTT.

Quote:

Originally Posted by 70LonghornCST

So, this is a 67-68? How can one tell?

Quote:

Originally Posted by special-K

I believe it's a 69-72. The stamping in front rises up steep like the hoods and 67/68s are sloped like the hoods. But,I don't think it even matters.

That is a 71/72 chevy hood latch GM P/N 3985103, Richard had it listed correctly from the start, I have used his same pics below and highlighted the ID giveaways. The first highlighted pic shows the drop down step at the front of the latch making it at least 69-72, the 67/68 latches are flat in this area. The second bottom view highlighted picture narrows it down yet farther again by showing the angle on the release lever making it 71/72 chevy, the 69/70 chevy latch levers are straight in this area while the 71/72's chevy levers are offset to the drivers side to allow access through the inner grill. Mel

70LonghornCST · 03-21-2012, 11:36 PM

Thanks for the great information, Mel. You truly are a walking 67-72 Chevy/GM Trucks encyclopedia.
-Richard

**special-K** · 03-22-2012, 08:42 AM

You're welcome. I was only concerned with negating the claim that it was a 67/68 to help your sale get back on track. I was focused on the 67/68 vs 69-72 obvious difference on top. Just for reference,here is what a 67/68 looks like. It's a GMC so handle is way offset due to grille center bar. But you can see it is just like the hood difference...sloped compared to stepped up:

(Best picture I had at the time)

GMC AMI · 03-22-2012, 11:25 AM

71/72's chevy levers are offset to the drivers side to allow access through the inner grill. Mel

That is what I was going by, the offset. The one in the pic did not seem to be offset but centered. I also checked and the off set handle is a little smaller on my 72parts truck than my 68. Was just trying to help, still a great deal.

**CUSTOM/10** · 03-22-2012, 12:26 PM

That's too nice to end up as a paper weight in your trash, so I'll take it. You don't happen to have a 71/72 center grille suport to go with it ?
PM me with info !

Gary

GMC AMI · 03-22-2012, 01:10 PM

Quote:

Originally Posted by GMC AMI

71/72's chevy levers are offset to the drivers side to allow access through the inner grill. Mel

That is what I was going by, the offset. The one in the pic did not seem to be offset but centered. I also checked and the off set handle is a little smaller on my 72parts truck than my 68. Was just trying to help, still a great deal.

I will buy this since I made an error with my old eyes if Gary passes.

70LonghornCST · 03-22-2012, 11:44 PM

Quote:

Originally Posted by CUSTOM/10

That's too nice to end up as a paper weight in your trash, so I'll take it. You don't happen to have a 71/72 center grille suport to go with it ?
PM me with info !

Gary

I might, let me check.

70LonghornCST · 03-23-2012, 02:08 AM

Quote:

Originally Posted by CUSTOM/10

That's too nice to end up as a paper weight in your trash, so I'll take it. You don't happen to have a 71/72 center grille suport to go with it ?
PM me with info !

Gary

Sorry, I guess I got rid of the center support. PM sent on the latch

GMC AMI · 03-26-2012, 07:03 AM

Quote:

Originally Posted by 70LonghornCST

I might, let me check.

Now that last couple of pics shows the offset clearly, thanks!

**CUSTOM/10** · 03-29-2012, 07:42 AM

Paypal sent !

Sorry for the wait, been very busy !

Thanks
Gary

03-18-2012, 05:58 PM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	1971-72 Hood Latch I got this somewhere along the way. It is really nice. It's been blasted. $18 shipped will get it to you. Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-21-2012, 12:44 AM	#2
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 1971-72 Hood Latch $15 shipped __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-21-2012, 11:13 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1971-72 Hood Latch A quality part for about free. Wowsers! Who needs this? I have too many already or I'd... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-21-2012, 09:01 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1971-72 Hood Latch I believe it's a 69-72. The stamping in front rises up steep like the hoods and 67/68s are sloped like the hoods. But,I don't think it even matters. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-21-2012, 09:05 PM	#7
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 1971-72 Hood Latch Ok, that's what I thought. I remember when I got this that it was 'said' to come off of a '72. Thanks for the reply And yes, I am basically giving this away, as the shipping will be $11.50 for a flat rate box. If no takers, I'll use it as a paper weight in my garbage can __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-21-2012, 11:36 PM	#9
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: 1971-72 Hood Latch Thanks for the great information, Mel. You truly are a walking 67-72 Chevy/GM Trucks encyclopedia. -Richard __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

03-22-2012, 08:42 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1971-72 Hood Latch You're welcome. I was only concerned with negating the claim that it was a 67/68 to help your sale get back on track. I was focused on the 67/68 vs 69-72 obvious difference on top. Just for reference,here is what a 67/68 looks like. It's a GMC so handle is way offset due to grille center bar. But you can see it is just like the hood difference...sloped compared to stepped up: (Best picture I had at the time) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2012, 11:25 AM	#11
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Re: 1971-72 Hood Latch 71/72's chevy levers are offset to the drivers side to allow access through the inner grill. Mel That is what I was going by, the offset. The one in the pic did not seem to be offset but centered. I also checked and the off set handle is a little smaller on my 72parts truck than my 68. Was just trying to help, still a great deal. __________________ 1968 Chevy 4x4 307 4 speed

03-22-2012, 12:26 PM	#12
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,855	Re: 1971-72 Hood Latch That's too nice to end up as a paper weight in your trash, so I'll take it. You don't happen to have a 71/72 center grille suport to go with it ? PM me with info ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-29-2012, 07:42 AM	#17
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,855	Re: 1971-72 Hood Latch Paypal sent ! Sorry for the wait, been very busy ! Thanks Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.