KS Just parted out 72 custom camper with a 350/AC - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ozark Tim · 04-12-2012, 04:07 PM

Randy,
How about that vacuum advance metal linewith the short rubber hose on each end??? I have the one off of the eagle motor but could use another.
Also all the carb off of this one. Is it worth salvaging and if so what carb # 7042208?
BTW, whats that big blue thing in the background of the pics??? LOL!
Tim

Luis_gz06 · 04-12-2012, 04:39 PM

Luis, the set is still available, sorry don't want to split up

Thanks Randy

Not a problem! Are they all in good condition? No bents, dings, etc? All the hardware? If so, I will buy them. Thanks!

teeitup · 04-12-2012, 06:13 PM

Nate, let me know when you want to come up and get seat. Do you want a TH350 linkage setup?

Tim, I don't think its there but will look. Carb is sold, sorry. Hey I got that blue thing all parted and all parts off it and its headed to scrap next week. That inside of the motor is nasty, I'll get you some pics, not sure what happened in there. THANKS for the deal though, always a pleasure dealing with you

Luis, they are good shape, just need cleaned up. I'll pm you info

Thanks Randy

teeitup · 04-12-2012, 06:23 PM

Bethewaz, here are the 2 best I have, not perfect but not junk either

teeitup · 04-12-2012, 06:24 PM

Graham57Am here is the best bat tray I have, its a non AC one and buckets

**Graham57a** · 04-12-2012, 08:54 PM

I'll pass on the battery tray but I'll take the headlight buckets. How much shipped to 28115?

Ozark Tim · 04-12-2012, 09:10 PM

I wonder what that was all about?? I didnt go that far. Just put a battery on it and it cranked. I did check the numbers on that one and it was the correct motor for the truck. Hope that wasnt a waste for you man. I know the body was rough but at least you were able to do some good I hope.
Anyway about that vac advance pipe, look at picture 3-5. The piece I am looking for is on there. If you didnt save it not a big deal but I will be needing one and the little retaining clip it attaches to which is held by the intake bolt just aft of the choke housing.
Thanks Randy,
Tim

Artic1212 · 04-12-2012, 09:22 PM

I would be interested in the rear tail lights and assemblies, and the center vent assembly. Shipped to 48640.

Thanks
Steve
Posted via Mobile Device

Bethewaz · 04-12-2012, 09:26 PM

Quote:

Originally Posted by teeitup

Bethewaz, here are the 2 best I have, not perfect but not junk either

Great, Ill take 'em

teeitup · 04-12-2012, 09:56 PM

Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets

OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry.

Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping

Bethewaz, door handles and headlight rings are yours. The pm we have going has info

Thanks Randy

**Graham57a** · 04-12-2012, 10:12 PM

What would the chrome rings be used for? It'll be goin on a 71-2 grill.

Artic1212 · 04-13-2012, 05:21 AM

Quote:

Originally Posted by teeitup

Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets

OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry.

Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping

Bethewaz, door handles and headlight rings are yours. The pm we have going has info

Thanks Randy

Ok, thanks.

I will take them, and PM you tonight when I get home from work. Thanks!

teeitup · 04-13-2012, 08:18 AM

Graham57A, they hold the headlights in

Artic1212, sounds good

Thanks Randy

**Graham57a** · 04-13-2012, 08:57 AM

I'll take em, 25 shipped. PM me your address and I'll have the payment sent out today

OhOneWS6 · 04-13-2012, 10:58 PM

Quote:

Originally Posted by teeitup

ohOneWS6, has passed on the arm rest since I do not take pay pal

Quote:

Originally Posted by teeitup

Guys there a few of you who question why I don't use pay pal, if you do over 200 transactions or $20,000 a year, the IRS/federal goverment gets involved and once that happens your price of parts will go up. If I take money orders I can keep the prices lower. I'm sorry there are a very few of you who are upset about me not taking pay pal

For the record I never questioned you reason or said I was upset. Maybe you were referring to others but your posts makes it look like that was directed at me.

:Cheers:

Roberre · 04-14-2012, 12:37 AM

Quote:

Originally Posted by teeitup

brake pedal $15 plus ship

ac vent

gas pedal setup $36 shipped

light and wiper switches

custom camper emblems $36 shipped

If still available, I'll take the "Custom Camper" emblems. Please advise.

Tuff Gong · 04-14-2012, 05:41 PM

Did that truck still have the factory custom camper wiring for towing?

*sharpie1972* · 04-14-2012, 05:49 PM

Quote:

Originally Posted by teeitup

Guys there a few of you who question why I don't use pay pal, if you do over 200 transactions or $20,000 a year, the IRS/federal goverment gets involved and once that happens your price of parts will go up. If I take money orders I can keep the prices lower. I'm sorry there are a very few of you who are upset about me not taking pay pal

X2 Randy. Paypal and the IRS have forced the small time truck parts guy to hire an accountant if they want to stay legal! Sharpie

teeitup · 04-14-2012, 06:15 PM

Grahams57A, Andrew, info sent

OhOneWS6, no worries, I've had a few others ask in pm's so I thought I would put it out there for everyone to see

Roberre, I will PM him to find out if he wants them

Brian, sorry no it doesn't

Dennis, your right thats what my accountant told me, do away with pay pal and stay with money orders and cash

Thanks Randy

dads longhorn · 04-17-2012, 07:15 PM

Are the mirrors glass cracked or in one piece. How's the rubber around the outside? Can you provide a pic of the glass side please. If good, I'll take them. Thanks

KensChevy · 04-17-2012, 09:40 PM

Im in need of the emergency brake pedal assembly - and possibly the cables?

teeitup · 04-17-2012, 09:42 PM

glass is not cracked, one rubber is separated, one chrome head has a small crease, one arm has some rust

teeitup · 04-17-2012, 09:43 PM

Kenschevy, I have the e brake assembly but no cable $15 plus ship. Thanks Randy

KensChevy · 04-17-2012, 09:57 PM

I will take the e brake....you take paypal?

teeitup · 04-18-2012, 07:38 AM

sorry no pay pal only money orders, I will get a quote tonight. Thanks Randy

04-12-2012, 04:07 PM	#76
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Just parted out 72 custom camper with a 350/AC Randy, How about that vacuum advance metal linewith the short rubber hose on each end??? I have the one off of the eagle motor but could use another. Also all the carb off of this one. Is it worth salvaging and if so what carb # 7042208? BTW, whats that big blue thing in the background of the pics??? LOL! Tim

04-12-2012, 04:39 PM	#77
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Just parted out 72 custom camper with a 350/AC Luis, the set is still available, sorry don't want to split up Thanks Randy Not a problem! Are they all in good condition? No bents, dings, etc? All the hardware? If so, I will buy them. Thanks! __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

04-12-2012, 06:13 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Nate, let me know when you want to come up and get seat. Do you want a TH350 linkage setup? Tim, I don't think its there but will look. Carb is sold, sorry. Hey I got that blue thing all parted and all parts off it and its headed to scrap next week. That inside of the motor is nasty, I'll get you some pics, not sure what happened in there. THANKS for the deal though, always a pleasure dealing with you Luis, they are good shape, just need cleaned up. I'll pm you info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 06:23 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Bethewaz, here are the 2 best I have, not perfect but not junk either Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 06:24 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57Am here is the best bat tray I have, its a non AC one and buckets Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 08:54 PM	#81
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: Just parted out 72 custom camper with a 350/AC I'll pass on the battery tray but I'll take the headlight buckets. How much shipped to 28115? __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-12-2012, 09:10 PM	#82
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Just parted out 72 custom camper with a 350/AC I wonder what that was all about?? I didnt go that far. Just put a battery on it and it cranked. I did check the numbers on that one and it was the correct motor for the truck. Hope that wasnt a waste for you man. I know the body was rough but at least you were able to do some good I hope. Anyway about that vac advance pipe, look at picture 3-5. The piece I am looking for is on there. If you didnt save it not a big deal but I will be needing one and the little retaining clip it attaches to which is held by the intake bolt just aft of the choke housing. Thanks Randy, Tim

04-12-2012, 09:22 PM	#83
Artic1212 Registered User Join Date: May 2010 Location: Midland, MI Posts: 23	Re: Just parted out 72 custom camper with a 350/AC I would be interested in the rear tail lights and assemblies, and the center vent assembly. Shipped to 48640. Thanks Steve Posted via Mobile Device

04-12-2012, 09:56 PM	#85
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry. Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping Bethewaz, door handles and headlight rings are yours. The pm we have going has info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 10:12 PM	#86
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: Just parted out 72 custom camper with a 350/AC What would the chrome rings be used for? It'll be goin on a 71-2 grill. __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-13-2012, 08:18 AM	#88
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57A, they hold the headlights in Artic1212, sounds good Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2012, 08:57 AM	#89
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,865	Re: Just parted out 72 custom camper with a 350/AC I'll take em, 25 shipped. PM me your address and I'll have the payment sent out today __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-14-2012, 05:41 PM	#92
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Just parted out 72 custom camper with a 350/AC Did that truck still have the factory custom camper wiring for towing?

04-14-2012, 06:15 PM	#94
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Grahams57A, Andrew, info sent OhOneWS6, no worries, I've had a few others ask in pm's so I thought I would put it out there for everyone to see Roberre, I will PM him to find out if he wants them Brian, sorry no it doesn't Dennis, your right thats what my accountant told me, do away with pay pal and stay with money orders and cash Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-17-2012, 07:15 PM	#95
dads longhorn Registered User Join Date: Mar 2010 Location: New mexico Posts: 369	Re: Just parted out 72 custom camper with a 350/AC Are the mirrors glass cracked or in one piece. How's the rubber around the outside? Can you provide a pic of the glass side please. If good, I'll take them. Thanks



Register or Log In To remove these advertisements.

04-17-2012, 09:40 PM	#96
KensChevy Registered User Join Date: Jul 2011 Location: Cleburne Texas Posts: 91	Re: Just parted out 72 custom camper with a 350/AC Im in need of the emergency brake pedal assembly - and possibly the cables?

04-17-2012, 09:42 PM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC glass is not cracked, one rubber is separated, one chrome head has a small crease, one arm has some rust Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-17-2012, 09:43 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Kenschevy, I have the e brake assembly but no cable $15 plus ship. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-17-2012, 09:57 PM	#99
KensChevy Registered User Join Date: Jul 2011 Location: Cleburne Texas Posts: 91	Re: Just parted out 72 custom camper with a 350/AC I will take the e brake....you take paypal?

04-18-2012, 07:38 AM	#100
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC sorry no pay pal only money orders, I will get a quote tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.