NY WTB- Front Stabalizer bar/brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C5Phil · 04-10-2012, 11:17 AM

Looking for a front bar/brackets- larger bar off a 3/4 ton would be preferred- something close to NY would also be great- Let me know what you have--

**Gary 70 Jimmy** · 04-10-2012, 11:22 AM

I have one in Ohio right at the OH PA line close to sharon PA.

**DeadheadNM** · 04-10-2012, 11:23 AM

Send a PM to ORANGBLAZ (Chuck) he's in Beacon, NY and may have what you need. I didn't think the 3/4t bar was a larger diameter but may be wrong. Pete

C5Phil · 04-10-2012, 11:39 AM

Quote:

Originally Posted by Gary 70 Jimmy

I have one in Ohio right at the OH PA line close to sharon PA.

You wouldn't by chance be going to the April Carlise meet? If not let me know what you'd need to ship it to me at the 14589 zip. Thanks--

I'm also checking with ORANGEBLAZ-- just in case he has one--

teeitup · 04-10-2012, 01:04 PM

mid 68 and all the way thru 72 were the same size, 1/2, 3/4 and 1 ton

**michael bustamante** · 04-10-2012, 01:07 PM

Quote:

Originally Posted by teeitup

mid 68 and all the way thru 72 were the same size, 1/2, 3/4 and 1 ton

X2.....it was the bushings that chenged depending on the diameter of the bar

**Classic Bowties** · 04-10-2012, 03:41 PM

Quote:

Originally Posted by teeitup

mid 68 and all the way thru 72 were the same size, 1/2, 3/4 and 1 ton

Quote:

Originally Posted by michael bustamante

X2.....it was the bushings that chenged depending on the diameter of the bar

I see this subject come up quite a bit for the 67-72's, if talking OE it should be as listed below. I have found NO H.D. bar option listed as being available between 67-72, first year of body style had the small 15/16" available and then the rest through 72 had the 1-1/16" avaialable. Each of the three below listed stabilizer bars used their own matching bushings. Mel

65-67 C-series had 15/16" front bar available.
68-72 C-series had 1-1/16" front bar available.
73 & up C-series used same above 1-1/16" bar as standard equip. (p/n suc.8/75)
73 & up C-20/30 series had a 1-1/4" bar available as optional H.D. equip.

**Classic Bowties** · 04-10-2012, 03:53 PM

Quote:

Originally Posted by C5Phil

You wouldn't by chance be going to the April Carlise meet? If not let me know what you'd need to ship it to me at the 14589 zip. Thanks--

I'm also checking with ORANGEBLAZ-- just in case he has one--

If you end up with the 1-1/16" bar and want to replace the bushings and bushing brackets, I have the below pictured bushings and clamps available in OE GM for $50. per set plus $6.10 for sending in a small USPS priority flat rate box. Mel

HeavyMetalChevy · 04-10-2012, 04:19 PM

Quote:

Originally Posted by teeitup

mid 68 and all the way thru 72 were the same size, 1/2, 3/4 and 1 ton

Thats what I have read as well!

C5Phil · 04-10-2012, 08:16 PM

I'm looking for the 1 1/16 bar (or larger)-- but I didn't realize that all 68-72's had the same size bar.... Still looking-- let me know what you have--

1970-Old_Betsy · 04-12-2012, 03:39 PM

Quote:

Originally Posted by Gary 70 Jimmy

I have one in Ohio right at the OH PA line close to sharon PA.

Not trying to hijack the thread here, but if you don't work out a deal with C5Phil on your sway bar, let me know, I might be interested pending price.

C5Phil · 04-12-2012, 04:29 PM

Quote:

Originally Posted by 1970-Old_Betsy

Not trying to hijack the thread here, but if you don't work out a deal with C5Phil on your sway bar, let me know, I might be interested pending price.

I'm waiting to hear back from him-- re: what shipping is and what exactly he has-(brackets, etc.)- it it's to expensive to ship you may get a shot at it--

HeavyMetalChevy · 04-12-2012, 04:51 PM

Quote:

Originally Posted by C5Phil

I'm waiting to hear back from him-- re: what shipping is and what exactly he has-(brackets, etc.)- it it's to expensive to ship you may get a shot at it--

shipping is not bad at all. I just shipped one all the way to Miami for around 15-20 bucks

C5Phil · 04-12-2012, 05:02 PM

Quote:

Originally Posted by HeavyMetalChevy

shipping is not bad at all. I just shipped one all the way to Miami for around 15-20 bucks

Thanks for the info. still waiting to hear--

**Chevy4Life** · 04-12-2012, 06:14 PM

The larger 73up bar will fit the 67-72s as long as you use the correct 1-1/4" bushings

C5Phil · 04-12-2012, 06:28 PM

Quote:

Originally Posted by Chevy4Life

The larger 73up bar will fit the 67-72s as long as you use the correct 1-1/4" bushings

That's what I'm looking for- but I'll settle for a 67-72 bar-- do you have either type?

**Gary 70 Jimmy** · 04-18-2012, 04:47 PM

Phil
I need your address to ship your bar. thanks Gary

04-10-2012, 11:17 AM	#1
C5Phil Registered User Join Date: Nov 2011 Location: Williamson New York Posts: 427	WTB- Front Stabalizer bar/brackets Looking for a front bar/brackets- larger bar off a 3/4 ton would be preferred- something close to NY would also be great- Let me know what you have--

04-10-2012, 11:22 AM	#2
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: WTB- Front Stabalizer bar/brackets I have one in Ohio right at the OH PA line close to sharon PA. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

04-10-2012, 11:23 AM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB- Front Stabalizer bar/brackets Send a PM to ORANGBLAZ (Chuck) he's in Beacon, NY and may have what you need. I didn't think the 3/4t bar was a larger diameter but may be wrong. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2012, 01:04 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: WTB- Front Stabalizer bar/brackets mid 68 and all the way thru 72 were the same size, 1/2, 3/4 and 1 ton __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2012, 08:16 PM	#10
C5Phil Registered User Join Date: Nov 2011 Location: Williamson New York Posts: 427	Re: WTB- Front Stabalizer bar/brackets I'm looking for the 1 1/16 bar (or larger)-- but I didn't realize that all 68-72's had the same size bar.... Still looking-- let me know what you have--

04-12-2012, 06:14 PM	#15
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 750	Re: WTB- Front Stabalizer bar/brackets The larger 73up bar will fit the 67-72s as long as you use the correct 1-1/4" bushings

04-18-2012, 04:47 PM	#17
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: WTB- Front Stabalizer bar/brackets Phil I need your address to ship your bar. thanks Gary __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.