FL Cab for cuts, high hump,gauge cluster,uncut dash

[Chevy072]

cab for cuts. this is a decent cab all around,but someone lifted it by the roof and screwed up the drip rail pretty bad,so i will cut it up if you need anything off it. $25 for small cuts and $40 for bigger cuts plus the ride.

Also for sale

Uncut dash in nice shape. $75 plus the ride
Gauge cluster $60 shipped
High hump ( look at top edge of hole for minor damage in picture) $65 shipped

I also have an uncut white dash in same condition $75 plus the ride

[old Chevy guy]

How bad is the drip rail? Is it just the drip rail or is the roof bent also? There is a board member I was going to sell windshield posts to not very far from you that decided he was looking for another cab. You can buy just the drip rails as a repair part if thats all it needs. Just hate to see a good cab get chopped if it could be fixed. If its just the driprails I can call him before you chop it. LMK Frank

[Chevy072]

Originally Posted by old Chevy guy

How bad is the drip rail? Is it just the drip rail or is the roof bent also? There is a board member I was going to sell windshield posts to not very far from you that decided he was looking for another cab. You can buy just the drip rails as a repair part if thats all it needs. Just hate to see a good cab get chopped if it could be fixed. If its just the driprails I can call him before you chop it. LMK Frank

Give me a minute and i will go take pictures. I think it can be fixed, but welding is not my forte'.

[old Chevy guy]

I just sent him an E mail but I have a cell number too. he's about 86 miles from you.

[Chevy072]

Originally Posted by old Chevy guy

How bad is the drip rail? Is it just the drip rail or is the roof bent also? There is a board member I was going to sell windshield posts to not very far from you that decided he was looking for another cab. You can buy just the drip rails as a repair part if thats all it needs. Just hate to see a good cab get chopped if it could be fixed. If its just the driprails I can call him before you chop it. LMK Frank

a couple floor supports will need to be replaced,and rocker panels, and drip rail issue. Other then that everything else is minor

[old Chevy guy]

The drip rail dosn't look to bad but the inner roof is a bit rough. He was looking for another cab because the roof and front pillers were bad on his. Is it just the inner roof that looks bad? How are the windshield piller posts? Thanks for the pictures and reply. I want to get him to talk to you directly,I kind of jumped in cause it seems like it it might be a good fit because of the proxcimity. I'll try and get him to look it up.

[Chevy072]

Originally Posted by old Chevy guy

The drip rail dosn't look to bad but the inner roof is a bit rough. He was looking for another cab because the roof and front pillers were bad on his. Is it just the inner roof that looks bad? How are the windshield piller posts? Thanks for the pictures and reply. I want to get him to talk to you directly,I kind of jumped in cause it seems like it it might be a good fit because of the proxcimity. I'll try and get him to look it up.

Pillars are excellent as far as i can tell. no rust and solid. There is a guy down the street from me who has 8 of these trucks at his tow company. I went there for the first time yesterday, and i will be going back on friday. I will see if any of his cabs are better and let you know

[hugger6933]

If you do decide to part out the cab I would like to talk to you about the hump. I am not in a hurry and will not push you to cut a cab that someone else needs whole. If the above deal falls apart let me know

[Chevy072]

Originally Posted by hugger6933

If you do decide to part out the cab I would like to talk to you about the hump. I am not in a hurry and will not push you to cut a cab that someone else needs whole. If the above deal falls apart let me know

My intention was to cut it up. The center hump? It bolts on and is for sale

[old Chevy guy]

If I dont get an E mail back by tomorrow I'll try and call him. That would be cool if you saw some others at that yard.

[Chevy072]

Originally Posted by old Chevy guy

If I dont get an E mail back by tomorrow I'll try and call him. That would be cool if you saw some others at that yard.

I will let you know

[greentruck]

Hey Chevy072, I'm the guy Old Chevy Guy mentioned whose looking for the cab. That one looks like something I could use. How much for just the cab? I don't need the high hump, gauge cluster, pedal assemblies etc.. Just the cab.

[BMERDOC]

Hold my place for the dash cluster. I'll get back to you by the end of the day. As apparent as it should be, does the cluster have faded chrome or painted aluminum?

***EDIT*** I see that its aluminum (silver). Are there any know defects? Especially with the bezel.

[Chevy072]

Originally Posted by BMERDOC

Hold my place for the dash cluster. I'll get back to you by the end of the day. As apparent as it should be, does the cluster have faded chrome or painted aluminum?

***EDIT*** I see that its aluminum (silver). Are there any know defects? Especially with the bezel.

The bezel is plastic. I just took it out and the circut board is seperated,and the back has surface rust on it. I have two more that i will take out later and post the pics of those for you.

[hugger6933]

if you can do a postal money order I'll take the hump if you let me know. Thanks, Jim

[Chevy072]

Originally Posted by hugger6933

if you can do a postal money order I'll take the hump if you let me know. Thanks, Jim

Thats fine. sending PM now

[BMERDOC]

Thanks! It needs to be the silver 7 hole. A tach would be a bonus.

[Chevy072]

I will be cutting this cab up afterall. Let me know if you need anything

[hugger6933]

Hans , I sent out the postal money order today

[Chevy072]

[QUOTE=hugger6933;5339737]Hans , I sent out the postal money order today[/QUOTE

Thanks. I will send it out right after i get it.

[Chevy072]

let me know what you need cut off. dash for sale also $75 plus the ride,and i have two uncut dashes available

[Chevy072]

This cab will be scrapped on wednesday. There is lots of good metal on here. If you want a picture of a certain spot let me know and i will get asap. I hate to toss a titled cab,but I have no need for it.

[Nohatch]

How are the rear corners of the floor?

[Chevy072]

Originally Posted by Nohatch

How are the rear corners of the floor?

They look good, I will get some pictures up in the A.M

[Chevy072]

going to the scrap yard very soon, The pictures of the back show what looks like rust. It is not rust,but the paint peeled off. the whole back is rust free, same with most of the floor and pillars and firewall.