![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2012
Location: brandon, MS
Posts: 32
|
shift linkage question
Ok guys, I have a 72 blazer. I am having trouble with the shift rod were it mets up at the column. It goes down though all of the gears fine however, when I try to pull it back up into park, the rod slips down and does not come all the way back up into park. I tightend the bolt up on the back side and it is still slipping. Any thoughts?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2012
Location: brandon, MS
Posts: 32
|
Re: shift linkage question
Sorry don't know how to take this post off. I figured it out.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2009
Location: Mesa AZ
Posts: 30
|
Re: shift linkage question
No need to remove the post but maybe post the solution to the problem to help someone else down the road maybe =-)
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2012
Location: brandon, MS
Posts: 32
|
Re: shift linkage question
No problem. I didn't have the gap washer? lined up correctly. The one that tightens up to the shaft was turned around backwards. It wasn't not getting tight up against the shaft. I know that seems very simple but after working on this thing all day I start to go a little crazy sometimes.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|