KS Wichita to St Louis Thursday (save on shipping)

[Cash3481]

Here's an oppertunity to get a few things I'm selling.
On Thursday 8 June, Im driving from Wichita to St Louis for work and am taking a truck.
If you want any of these items they will need to be prepaid through paypal and Ill load them on the truck.

This is a 454 casting number is 361959 and it was in a truck I parted recently. The carb is a 7042206. It still has the carb, waterpump, starter and fuel pump but does NOT have manifolds. It ran decent when I pulled it up on the trailer to take it home I dont know anything other than that about this motor.
I also Have a T-400 tranny that Ill sell for $100.
I hate to waste the trip with an empty truck if someone needs something I have for sale and can save you the shipping.
Heres the list of parts that Im willing to bring if paid for ahead of time.
You will need to meet me close to the highway since I have to get there the same day but Ill leave early if I need to...Here's the list!

454 BBC Casting Number 361595 w/carb 7042206 $475 w/engine dolly
Turbo 400 tranny $100
3 Speed Manual Tranny $75
Real nice uncut A/C dash $75
GMC Core Support has some rust under battery but not bad. $50

I have a $30 parts and a $20 parts thread I will send to the top if there is anything else you can use, Ill grab that for you too!

More Pics of anything you need just ask...

[Cash3481]

Morning bump!
Posted via Mobile Device

[29od1]

Hi Mike, you may want to check that date posted in the top of the thread.

[Cash3481]

Originally Posted by 29od1

Hi Mike, you may want to check that date posted in the top of the thread.

Thanks David... Im a month off! Corrected!
Mike

[29od1]

No problem, bumpin it up.

[74 shortbed 406]

If I could afford it right now, id buy the motor off of you.

[Cash3481]

Originally Posted by 74 shortbed 406

If I could afford it right now, id buy the motor off of you.

Understood! I know where your coming from too. That is the reason I'm offering to save someone some money on shipping. The carb and dolly are worth $100 by themselves.
Posted via Mobile Device

[Elliot949]

do you by any chance have a good Right fender for a 67-68?

[Cash3481]

Originally Posted by Elliot949

do you by any chance have a good Right fender for a 67-68?

Eliot949:
I have one for cuts... No perfect ones, But I do have 2 D/S ones. Let me know when your this way and Ill let you take a look at it. I wouldnt put it on a truck though.
Mike

[Elliot949]

Thanks For getting back to me... I am looking for a fender that only has minor damage no rust... thanks... we are in Mulvane all the time... at least 2 or 3 days a week...

Dan

[74 shortbed 406]

And I'm an hr north of st. Louis.

[Cash3481]

Date changed to Saturday, if that helps anyone out with getting these larger parts.
Mike
Posted via Mobile Device

[Cash3481]

TTT for a chance to save on shipping this 454 BB/T-400 or 3 speed tranny.
Im driving that way and coming back on the 18th or 19th.
I also have a 3/4 ton suspension w/wagon wheels and tires, if someone needs it.
Mike

[Elliot949]

What gear is in that differential... Lets see a pic of it...

[Cash3481]

Originally Posted by Elliot949

What gear is in that differential... Lets see a pic of it...

It came out of a 3/4 ton 72 GMC BB t-400 truck. I have front and rear suspension not sure on the gear ratio though, sorry. It did look to be original.

[Cash3481]

TTT last chance! Leaving tomorrow morning.
Posted via Mobile Device