Center caps for old school mag wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 06-19-2012, 10:15 PM

I picked up some 16.5x9.75 Slots with some 37" Swampers off of Craigslist. They were already rattle canned black. I want to get some chrome centercaps for them to make them stand out just a bit. The wheels and tires just kind of blend into each other.

I pulled a wheel off this weekend and hit up the 3 tire stores in town and came up empty handed. I figured the internet was the next stop, but have no idea what the ID of the center hole is. I tried my calipers, but they are too big to fit in the wheel.

Does anyone else have an idea of how to get the id of the center of the rim, or have these rims with centercaps that can get me a measurement?

kcsa75 · 06-19-2012, 10:36 PM

Gorilla Automotive -- http://www.gorilla-auto.com/hub-covers

I bought new caps for my Outlaw IIs. Just measure the hole, find the right bolt pattern and you're off to the races.

*E.Furgal* · 06-20-2012, 06:29 AM

if you get the hole size I can look at the ones in my basement..
I only have the fronts.. with the cut out for the 4x4 locking hubs

06-19-2012, 10:15 PM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Center caps for old school mag wheels I picked up some 16.5x9.75 Slots with some 37" Swampers off of Craigslist. They were already rattle canned black. I want to get some chrome centercaps for them to make them stand out just a bit. The wheels and tires just kind of blend into each other. I pulled a wheel off this weekend and hit up the 3 tire stores in town and came up empty handed. I figured the internet was the next stop, but have no idea what the ID of the center hole is. I tried my calipers, but they are too big to fit in the wheel. Does anyone else have an idea of how to get the id of the center of the rim, or have these rims with centercaps that can get me a measurement? __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

06-19-2012, 10:36 PM	#2
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: Center caps for old school mag wheels Gorilla Automotive -- http://www.gorilla-auto.com/hub-covers I bought new caps for my Outlaw IIs. Just measure the hole, find the right bolt pattern and you're off to the races. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

06-20-2012, 06:29 AM	#3
E.Furgal Account Suspended Join Date: Mar 2012 Location: Abington,Ma. Posts: 87	Re: Center caps for old school mag wheels if you get the hole size I can look at the ones in my basement.. I only have the fronts.. with the cut out for the 4x4 locking hubs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.